iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

CLC/TR 50542-2:2016

(Main)

Railway applications - Driver's cab Train Display Controller (TDC) - Part 2: Display systems FIS

Railway applications - Driver's cab Train Display Controller (TDC) - Part 2: Display systems FIS

The scope of this Technical Report is the definition of the functional interface between TDC and DMIs. See Figure 1 - TDC DMI functional interface. The DMIs are those defined and considered in CLC/TR 50542-1. The TDC is defined in CLC/TR 50542-1. NOTE The conversion of physical signals into numerical representation is out of the scope.

Bahnanwendungen - Display-Steuereinheit (TDC) für Führerräume - Teil 2: Spezifikation der Funktionalen Schnittstelle (FIS) Anzeigesysteme

Železniške naprave - Krmilnik vlakovnega prikazovalnika v strojevodjevem prostoru (TDC) - 2. del: Sistemi za prikazovanje (FIS)

Področje uporabe tega tehničnega poročila je definicija funkcijskega vmesnika med TDC in DMI-ji. Glej sliko 1 – Funkcijski vmesnik TDC DMI.
DMI-ji so opredeljeni in obravnavani v standardu CLC/TR 50542-1.
TDC je opredeljen v standardu CLC/TR 50542-1.
OPOMBA: Pretvorba fizičnih signalov v signale v številske označbe je zunaj področja uporabe.

General Information

Status
Published
Publication Date
15-Dec-2016
ICS
35.240.60 - IT applications in transport
45.020 - Railway engineering in general
Technical Committee
CLC/TC 9X - Electrical and electronic applications for railways
Drafting Committee
CLC/TC 9X - Electrical and electronic applications for railways
Current Stage
6060 - Document made available - Publishing
Start Date
16-Dec-2016
Due Date
07-Feb-2017
Completion Date
16-Dec-2016
Ref Project
SIST-TP CLC/TR 50542-2:2017 - Railway applications - Driver's cab Train Display Controller (TDC) - Part 2: Display systems FIS

Buy Standard

TP CLC/TR 50542-2:2017 - BARVETP CLC/TR 50542-2:2017 - BARVE
PreviousNext
Technical report
TP CLC/TR 50542-2:2017 - BARVE
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TP CLC/TR 50542-2:2017
01-april-2017
Železniške naprave - Krmilnik vlakovnega prikazovalnika v strojevodjevem
prostoru (TDC) - 2. del: Sistemi za prikazovanje (FIS)
Railway applications - Driver's cab Train Display Controller (TDC) - Part 2: Display
systems FIS
Ta slovenski standard je istoveten z: CLC/TR 50542-2:2016
ICS:
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
45.020 Železniška tehnika na Railway engineering in
splošno general
SIST-TP CLC/TR 50542-2:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TP CLC/TR 50542-2:2017

---------------------- Page: 2 ----------------------

SIST-TP CLC/TR 50542-2:2017


TECHNICAL REPORT CLC/TR 50542-2

RAPPORT TECHNIQUE

TECHNISCHER BERICHT
December 2016
ICS 35.240.60; 45.020

English Version
Railway applications - Driver's cab Train Display Controller
(TDC) - Part 2: Display systems FIS
 Bahnanwendungen - Train Display Controller (TDC) im
Führerraum - Teil 2: Spezifikation der Funktionalen
Schnittstelle(FIS) Anzeigesysteme


This Technical Report was approved by CENELEC on 2016-11-21.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. CLC/TR 50542-2:2016 E

---------------------- Page: 3 ----------------------

SIST-TP CLC/TR 50542-2:2017
CLC/TR 50542-2:2016 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Symbols and abbreviations . 6
5 General principles . 6
6 Functions . 7
6.1 General . 7
6.2 Operational functions . 7
6.2.1 Display Button . 7
6.2.2 Display Indicator . 7
6.2.3 Display Text Message . 8
6.2.4 Play Sound . 8
6.2.5 Enter Data . 8
6.2.6 Confirm Data . 9
6.2.7 Display Values . 9
6.2.8 Show Video .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN 50128:2011/A2:2020(Amendment)
Railway applications - Communication, signalling and processing systems - Software for railway control and protection systems
SIST EN 50128:2011/A2:2020

Unchanged with respect to the current edition EN 50128:2011. Scope of the amendment: - Alignment with EN 50126-1:2017, EN 50126-2:2017 and EN 50129:2018 together with minor corrections

  • Amendment
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50159:2010/A1:2020(Amendment)
Railway applications - Communication, signalling and processing systems - Safety-related communication in transmission systems
SIST EN 50159:2010/A1:2020

2021: CLC legacy converted by DCLab NISOSTS

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50128:2011/A1:2020(Amendment)
Railway applications - Communication, signalling and processing systems - Software for railway control and protection systems
SIST EN 50128:2011/A1:2020

2021: CLC legacy converted by DCLab NISOSTS

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
CLC/TR 50542-1:2018(Main)
Railway applications - Driver's cab train display controller (TDC) - Part 1: General architecture
SIST-TP CLC/TR 50542-1:2019

In accordance with the ERTMS/ETCS specifications, Subset 121, UIC 612 leaflet, ERA_ERTMS_015560 document, EN 50126 and EN 61375 series requirements, this Technical Report describes the Train Display System (TDS) in the driver’s cab, and the link between the TDS/TDC and some of its interfaces (Blue box and blue links only): [figure] Figure 1 - Functional architecture The scope of this document is to define the functional architecture around the TDC. This Technical Report excludes the following items: - Communication protocols (e.g. EN 61375 series); - Ergonomic aspects; - Interface with ETCS (Subset 121); - Train functions; - GSM-R EIRENE functions; - Use of the displays as terminals for maintenance purpose.

  • Technical report
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
CLC/TR 50542-3:2016(Main)
Railway applications - Driver's cab train Display Controller (TDC) - Part 3: Other train systems FIS
SIST-TP CLC/TR 50542-3:2017

The scope of this document is the definition of the functional interface between TDC and other train systems. These other train systems are the train systems (different from ETCS (Subset 121) and DMIs) from the TDC point of view. The functional interface deals with data exchanged between TDC and these train systems. The TDC is defined in document CLC/TR 50542-1.

  • Technical report
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50128:2011/AC:2014(Corrigendum)
Railway applications - Communication, signalling and processing systems - Software for railway control and protection systems
SIST EN 50128:2011/AC:2014

BT agreed to extend the DOW of EN 50128:2011 from DOR + 36 months to DOR + 72 months, to read 2017-04-25

  • Corrigendum
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
CLC/TR 50501-2:2012(Main)
Railway applications - Rolling stock - Intercommunication between vehicles and train/wayside - Part 2: Technical contents of standardization work in the field of intercommunication
SIST-TP CLC/TR 50501-2:2012

The scope of this Technical Report is to summarize all available data on standardization work in the field of Intercommunication including 1. the results of work of WG B14 carried out so far, 2. data from other related activities such as the research projects MODTRAIN and INTEGRAIL, 3. data from the sector organisation TMP. NOTE “TMP”, Technical Management Platform, is one of the structures created by the rail representatives associations in order to express common views on TSI open issues or standardization work programs (not active anymore).

  • Technical report
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50128:2011(Main)
Railway applications - Communication, signalling and processing systems - Software for railway control and protection systems
SIST EN 50128:2011

1.1 This European Standard specifies the process and technical requirements for the development of software for programmable electronic systems for use in railway control and protection applications. It is aimed at use in any area where there are safety implications. These systems can be implemented using dedicated microprocessors, programmable logic controllers, multiprocessor distributed systems, larger scale central processor systems or other architectures. 1.2 This European Standard is applicable exclusively to software and the interaction between software and the system of which it is part. 1.3 This European Standard is not relevant for software that has been identified as having no impact on safety, i.e. software of which failures cannot affect any identified safety functions. 1.4 This European Standard applies to all safety related software used in railway control and protection systems, including – application programming, – operating systems, – support tools, – firmware. Application programming comprises high level programming, low level programming and special purpose programming (for example: Programmable logic controller ladder logic). 1.5 This European Standard also addresses the use of pre-existing software and tools. Such software may be used, if the specific requirements in 7.3.4.7 and 6.5.4.16 on pre-existing software and for tools in 6.7 are fulfilled. 1.6 Software developed according to any version of this European Standard will be considered as compliant and not subject to the requirements on pre-existing software. 1.7 This European Standard considers that modern application design often makes use of generic software that is suitable as a basis for various applications. Such generic software is then configured by data, algorithms, or both, for producing the executable software for the application. The general Clauses 1 to 6 and 9 of this European Standard apply to generic software as well as for application data or algorithms. The specific Clause 7 applies only for generic software while Clause 8 provides the specific requirements for application data or algorithms. 1.8 This European Standard is not intended to address commercial issues. These should be addressed as an essential part of any contractual agreement. All the clauses of this European Standard will need careful consideration in any commercial situation. 1.9 This European Standard is not intended to be retrospective. It therefore applies primarily to new developments and only applies in its entirety to existing systems if these are subjected to major modifications. For minor changes, only 9.2 applies. The assessor has to analyse the evidences provided in the software documentation to confirm whether the determination of the nature and scope of software changes is adequate. However, application of this European Standard during upgrades and maintenance of existing software is highly recommended.

  • Standard
    127 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    132 pages
    French language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50159:2010(Main)
Railway applications - Communication, signalling and processing systems - Safety-related communication in transmission systems
SIST EN 50159:2010

This European Standard is applicable to safety-related electronic systems using for digital communication purposes a transmission system which was not necessarily designed for safety-related applications and which is – under the control of the designer and fixed during the lifetime, or – partly unknown or not fixed, however unauthorised access can be excluded, or – not under the control of the designer, and also unauthorised access has to be considered. Both safety-related equipment and non safety-related equipment can be connected to the transmission system. This standard gives the basic requirements needed to achieve safety-related communication between safety-related equipment connected to the transmission system. This European Standard is applicable to the safety requirement specification of the safety-related equipment connected to the transmission system, in order to obtain the allocated safety integrity requirements. Safety requirements are generally implemented in the safety-related equipment, designed according to EN 50129. In certain cases these requirements may be implemented in other equipment of the transmission system, as long as there is control by safety measures to meet the allocated safety integrity requirements. The safety requirement specification is a precondition of the safety case of a safety-related electronic system for which the required evidence is defined in EN 50129. Evidence of safety management and quality management has to be taken from EN 50129. The communication-related requirements for evidence of functional and technical safety are the subject of this standard. This European Standard is not applicable to existing systems, which had already been accepted prior to the release of this standard. This European Standard does not specify – the transmission system, – equipment connected to the transmission system, – solutions (e.g. for interoperability), – which kind of data are safety-related and which are not. A safety-related equipment connected through an open transmission system can be subjected to many different IT security threats, against which an overall program has to be defined, encompassing management, technical and operational aspects. In this European Standard however, as far as IT security is concerned, only intentional attacks by means of messages to safety-related applications are considered. This European Standard does not cover general IT security issues and in particular it does not cover IT security issues concerning – ensuring confidentiality of safety-related information, – preventing overloading of the transmission system.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    64 pages
    French language
    sale 10% off
    e-Library read for
    1 day
CLC
CLC/TR 50501-1:2007(Main)
Railway applications - Rolling stock - Intercommunication between vehicles and train/wayside - Part 1: Data dictionary and rules for functional standardisation
SIST-TP CLC/TR 50501-1:2007

This Technical Report will define - requirements for the methods to be used for functional standardisation, in the standards to be prepared for data exchange involving railway vehicles, in two contexts 1) inter-consists communication, within a train formation, 2) communication with ground based installations. - the Reference Architecture defining the essential functional interfaces, - the concept of a central Data Dictionary/repository to be applied to freight and passenger traffic functions. In this context, data are to be limited to basic information elements, which are necessary to define standard messages required for interoperability, and displayed on the interfaces of the communicating entities. Entering Data Dictionary will provide full definition of a data element, along with its essential attributes at conceptual level. The purpose, in the perspective of the standards to be prepared, is to document the data element pertinent to the functional area and essential for interoperability, to allow the reuse of data element among functional area systems, and facilitate data interchange among the systems. NOTE Data Dictionary shall be designed to provide a structural framework that enables continued growth and enhancement of the scope of defined data. Rationale for this requirement is that it is difficult, when defining the scope of a proposed system to fully define the application domain and all included interoperability related data. In addition over time, functional requirements will expand.

  • Technical report
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day