EN 60068-2-43:2003

Environmental testing - Part 2-43: Tests - Test Kd: Hydrogen sulphide test for contacts and connections

Provides accelerated means to assess the effects of the tarnishing of silver and silver alloys used for contacts and connections.

Umweltprüfungen - Teil 2-43: Prüfungen - Prüfung Kd: Hydrogensulfid für Kontakte und Verbindungen

Essai d'environnement - Partie 2-43: Essais - Essai Kd: Essai à l'hydrogène sulfuré pour contacts et connexions

Fournit une procédure accélérée pour vérifier les effets du ternissement de l'argent et des alliages d'argent utilisés dans les contacts et connexions.

Okoljsko preskušanje – 2-43. del: Preskusi - Preskus Kd: Preskus z vodikovim sulfidom za kontakte in spoje (IEC 60068-2-43:2003)

General Information

• Status: Published
• Publication Date: 08-Sep-2003
• Withdrawal Date: 31-Aug-2006
• ICS: 31.220.10 - Plug-and-socket devices. Connectors
• Technical Committee: CLC/SR 48B - Connectors
• Drafting Committee: IEC/SC 48B - IEC_SC_48B
• Parallel Committee: IEC/SC 48B - IEC_SC_48B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 09-Sep-2003
• Completion Date: 09-Sep-2003
• Ref Project: SIST EN 60068-2-43:2005 - Environmental testing -- Part 2-43: Tests - Test Kd: Hydrogen sulphide test for contacts and connections

Standards Content (Sample)

SLOVENSKI SIST EN 60068-2-43:2005

STANDARD
marec 2005
Okoljsko preskušanje – 2-43. del: Preskusi - Preskus Kd: Preskus z vodikovim
sulfidom za kontakte in spoje (IEC 60068-2-43:2003)
Environmental testing - Part 2-43: Tests - Test Kd: Hydrogen sulphide test for
contacts and connections (IEC 60068-2-43:2003)
ICS 19.040; 29.020 Referenčna številka
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

EUROPEAN STANDARD EN 60068-2-43
NORME EUROPÉENNE
EUROPÄISCHE NORM September 2003

ICS 31.220.10
English version
Environmental testing
Part 2-43: Tests –
Test Kd: Hydrogen sulphide test
for contacts and connections
(IEC 60068-2-43:2003)
Essais d'environnement Umweltprüfungen
Partie 2-43: Essais – Teil 2-43: Prüfungen –
Essai Kd: Essai à l'hydrogène sulfuré Prüfung Kd: Hydrogensulfid
pour contacts et connexions für Kontakte und Verbindungen
(CEI 60068-2-43:2003) (IEC 60068-2-43:2003)

This European Standard was approved by CENELEC on 2003-09-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60068-2-43:2003 E
Foreword
The text of document 48B/1325/FDIS, future edition 2 of IEC 60068-2-43, prepared by SC 48B,
Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic
equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60068-2-43 on 2003-09-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-06-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-09-01

Annexes designated "normative" are part of the body of the standard.
Annexes designated "informative" are given for information only.
In this standard, annex ZA is normative and annex A is informative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60068-2-43:2003 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60068-1 NOTE Harmonized as EN 60068-1:1994 (not modified).
IEC 60068-2-46 NOTE Harmonized as HD 323.2.46 S1:1988 (not modified).
__________
- 3 - EN 60068-2-43:2003
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60512-2-1 2002 Connectors for electronic equipment - EN 60512-2-1 2002
Tests and measurements
Part 2-1: Electrical continuity and
contact resistance tests - Test 2a:
Contact resistance - Millivolt level
method
NORME CEI
INTERNATIONALE IEC
60068-2-43
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2003-05
Essais d'environnement –
Partie 2-43:
Essais –
Essai Kd: Essai à l'hydrogène sulfuré
pour contacts et connexions
Environmental testing –
Part 2-43:
Tests –
Test Kd: Hydrogen sulphide test
for contacts and connections
 IEC 2003 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail]  Web: www.iec.ch
CODE PRIX
H
Commission Electrotechnique Internationale PRICE CODE
International Electrotechnical Commission
Международная Электротехническая Комиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

60068-2-43  IEC:2003 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
ENVIRONMENTAL TESTING –
Part 2-43: Tests –
Test Kd: Hydrogen sulphide test for contacts and connections
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International
Organization for Standardization (ISO) in accordance with conditions determined by agreement between the
two organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical specifications, technical reports or guides and they are accepted by the National
Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60068-2-43 has been prepared by subcommittee 48B: Connectors,
of IEC technical committee 48: Electromechanical components and mechanical structures
for electronic equipment.
This second edition cancels and replaces the first edition issued in 1976 and constitutes
a technical revision.
The text of this standard is based on the following documents:
FDIS Report on voting
48B/1325/FDIS 48B/1352/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has be
...