EN 60512-2-1:2002

Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method

Defines a standard test method to measure the electrical resistance across a pair of mated contacts or a contact with a measuring gauge. Measurements may be carried out with direct current or alternating current.

Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren - Teil 2-1: Prüfungen des elektrischen Durchgangs und Durchgangswiderstands - Prüfung 2a: Durchgangswiderstand - Millivoltmethode

Connecteurs pour équipements électroniques - Essais et mesures - Partie 2-1: Essais de continuité électrique et de résistance de contact - Essai 2a: Résistance de contact - Méthode du niveau des millivolts

Définit une méthode d'essai normalisée pour mesurer la résistance électrique d'une paire de contacts accouplés ou d'un contact accouplé avec un calibre de mesure. Les mesures peuvent être effectuées en courant continu ou en courant alternatif.

Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method (IEC 60512-2-1:2002)

General Information

• Status: Published
• Publication Date: 11-Apr-2002
• Withdrawal Date: 31-Mar-2005
• ICS: 31.220.10 - Plug-and-socket devices. Connectors
• Technical Committee: CLC/SR 48B - Connectors
• Drafting Committee: IEC/SC 48B - IEC_SC_48B
• Parallel Committee: IEC/SC 48B - IEC_SC_48B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 12-Apr-2002
• Completion Date: 12-Apr-2002
• Ref Project: SIST EN 60512-2-1:2003 - Connectors for electronic equipment - Tests and measurements -- Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method

Standards Content (Sample)

SIST EN 60512-2-1:2003SLOVENSKIoktober 2003
STANDARDConnectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method (IEC 60512-2-1:2002)©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST EN 60512-2-1:2003(en)ICS31.220.10







EUROPEAN STANDARDEN 60512-2-1NORME EUROPÉENNEEUROPÄISCHE NORMApril 2002CENELECEuropean Committee for Electrotechnical StandardizationComité Européen de Normalisation ElectrotechniqueEuropäisches Komitee für Elektrotechnische NormungCentral Secretariat: rue de Stassart 35, B - 1050 Brussels© 2002 CENELEC -All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.Ref. No. EN 60512-2-1:2002 EICS 31.220.10English versionConnectors for electronic equipment –Tests and measurementsPart 2-1: Electrical continuity and contact resistance tests –Test 2a: Contact resistance –Millivolt level method(IEC 60512-2-1:2002)Connecteurs pour équipementsélectroniques –Essais et mesuresPartie 2-1: Essais de continuité électriqueet de résistance de contact –Essai 2a: Résistance de contact -Méthode du niveau des millivolts(CEI 60512-2-1:2002)Steckverbinder für elektronischeEinrichtungen –Mess- und PrüfverfahrenTeil 2-1: Prüfungen des elektrischenDurchgangs und Durchgangswiderstands -Prüfung 2a: Durchgangswiderstand -Millivoltmethode(IEC 60512-2-1:2002)This European Standard was approved by CENELEC on 2002-04-01. CENELEC members are bound tocomply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained onapplication to the Central Secretariat or to any CENELEC member.This European Standard exists in three official versions (English, French, German). A version in any otherlanguage made by translation under the responsibility of a CENELEC member into its own language andnotified to the Central Secretariat has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.



EN 60512-2-1:2002- 2 -ForewordThe text of document 48B/1130/FDIS, future edition 1 of IEC 60512-2-1, prepared by SC 48B,Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronicequipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC asEN 60512-2-1 on 2002-04-01.The following dates were fixed:–latest date by which the EN has to be implementedat national level by publication of an identicalnational standard or by endorsement(dop)2003-01-01–latest date by which the national standards conflictingwith the EN have to be withdrawn(dow)2005-04-01__________Endorsement noticeThe text of the International Standard IEC 60512-2-1:2002 was approved by CENELEC as aEuropean Standard without any modification.__________



NORMEINTERNATIONALECEIIECINTERNATIONALSTANDARD60512-2-1Première éditionFirst edition2002-02Connecteurs pour équipements électroniques –Essais et mesures –Partie 2-1:Essais de continuité électrique etde résistance de contact –Essai 2a: Résistance de contact –Méthode du niveau des millivoltsConnectors for electronic equipment –Tests and measurements –Part 2-1:Electrical continuity and contactresistance tests –Test 2a: Contact resistance –Millivolt level methodPour prix, voir catalogue en vigueurFor price, see current catalogue IEC 2002
Droits de reproduction réservés

Copyright - all rights reservedAucune partie de cette publication ne peut être reproduite niutilisée sous quelque forme que ce soit et par aucun procédé,électronique ou mécanique, y compris la photocopie et lesmicrofilms, sans l'accord écrit de l'éditeur.No part of this publication may be reproduced or utilized in anyform or by any means, electronic or mechanical, includingphotocopying and microfilm, without permission in writing fromthe publisher.International Electrotechnical Commission,
3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, SwitzerlandTelephone: [phone]
Telefax: [phone]
E-mail: [e-mail]
Web: www.iec.chCODE PRIXPRICE CODEECommission Electrotechnique InternationaleInternational Electrotechnical Commission



60512-2-1  IEC:2002– 3 –INTERNATIONAL ELECTROTECHNICAL COMMISSION–––––––––CONNECTORS FOR ELECTRONIC EQUIPMENT –TESTS AND MEASUREMENTS –Part 2-1: Electrical continuity and contact resistance tests –Test 2a: Contact resistance – Millivolt level methodFOREWORD1)The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprisingall
...