EN 60810:2015
(Main)Lamps for road vehicles - Performance requirements
Lamps for road vehicles - Performance requirements
IEC 60810:2014 is applicable to lamps (filament lamps, discharge lamps and LED light sources) to be used in headlamps, fog-lamps and signalling lamps for road vehicles. It is especially applicable to those lamps which are listed in IEC 60809. However, the standard may also be used for other lamps falling under the scope of this standard. This fourth edition cancels and replaces the third edition, published in 2003, its Amendments 1 (2008) and 2 (2013). This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) introduction of new gas discharge light sources; b) introduction of requirements for non-replaceable filament lamps; c) introduction of requirements and test conditions for LED packages.
Lampen für Straßenfahrzeuge - Anforderungen an die Arbeitsweise
Lampes pour véhicules routiers - Exigences de performances
L'IEC 60810:2014 est applicable aux lampes (lampes à filament, lampes à décharge et sources lumineuses à LED) destinées à être utilisées dans les projecteurs avant, les feux de brouillard et les feux de signalisation des véhicules routiers. Elle s'applique particulièrement aux lampes figurant dans l'IEC 60809. Cependant, elle peut aussi être utilisée pour d'autres lampes relevant de son domaine d'application. Cette quatrième édition annule et remplace la troisième édition parue en 2003, l'Amendement 1 (2008) et l'Amendement 2 (2013). Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) introduction de nouvelles sources lumineuses à décharge; b) introduction des exigences applicables aux lampes à filament non remplaçable; c) introduction des exigences et conditions d'essai applicables aux LED encapsulées.
Sijalke za cestna vozila - Tehnične zahteve (IEC 60810:2014)
Ta mednarodni standard se uporablja za sijalke (konvencionalne sijalke, razelektritvene sijalke in svetlobne vire LED), ki se uporabljajo v žarometih, meglenkah in signalnih lučeh za cestna vozila. Še posebej se uporablja za sijalke, navedene v standardu IEC 60809. Vendar standard se lahko uporablja tudi za druge sijalke, ki spadajo na področje uporabe tega standarda.
Določa zahteve in preskusne metode za merjenje lastnosti delovanja, kot so življenjska doba sijalke, vzdrževanje svetlobnega toka, torzijska moč, trdnost žarnice ter odpornost na vibracije in udarce. Informacije o mejnih vrednostih temperature, največjem obsegu sijalke in najvišjih še sprejemljivih napetostnih udarih so podane kot smernice za načrtovanje opreme za razsvetljavo in električne opreme.
Pri nekaterih zahtevah iz tega standarda so omenjeni podatki, ki so navedeni v preglednicah. Ustrezne podatke za sijalke, ki niso navedene v takšnih preglednicah, zagotovi njihov proizvajalec ali odgovorni prodajalec.
Zahteve glede zmogljivosti so dodane k osnovnim zahtevam iz standarda IEC 60809. Vendar niso namenjene organom za pravne namene tipske odobritve.
OPOMBA 1: V različnih slovarjih in standardih se uporabljajo različni izrazi za »sijalko« (IEC 60050- 845:1987, 845-07-04) in »razelektritveno sijalko« (IEC 60050-845:1987, 845-07-17). V tem standardu se uporabljata izraza »konvencionalna sijalka« in »razelektritvena sijalka«. Kadar je zapisan samo izraz »sijalka«, sta mišljeni obe vrsti sijalk, če iz konteksta ni jasno razvidno, da se izraz nanaša na samo eno vrsto.
OPOMBA 2: Ta standard se ne uporablja za svetilke.
OPOMBA 3: V tem standardu se uporablja izraz »svetlobni vir LED«, medtem ko se morda v drugih standardih za podobne proizvode uporablja izraz »sijalke LED«.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60810:2015
01-junij-2015
1DGRPHãþD
SIST EN 60810:2004
SIST EN 60810:2004/A1:2008
SIST EN 60810:2004/A2:2014
6LMDONH]DFHVWQDYR]LOD7HKQLþQH]DKWHYH ,(&
Lamps for road vehicles - Performance requirements
Lampen für Straßenfahrzeuge - Anforderungen an die Arbeitsweise
Ta slovenski standard je istoveten z: EN 60810:2015
ICS:
29.140.20 Žarnice z žarilno nitko Incandescent lamps
43.040.20 Naprave za osvetlitev, Lighting, signalling and
signalizacijo in opozarjanje warning devices
SIST EN 60810:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60810:2015
---------------------- Page: 2 ----------------------
SIST EN 60810:2015
EUROPEAN STANDARD EN 60810
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2015
ICS 29.140.99 Supersedes EN 60810:2003
English Version
Lamps for road vehicles - Performance requirements
(IEC 60810:2014)
Lampes pour véhicules routiers - Exigences de Lampen für Straßenfahrzeuge - Anforderungen an die
performances Arbeitsweise
(IEC 60810:2014) (IEC 60810:2014)
This European Standard was approved by CENELEC on 2015-01-20. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60810:2015 E
---------------------- Page: 3 ----------------------
SIST EN 60810:2015
EN 60810:2015 - 2 -
Foreword
The text of document 34A/1797/FDIS, future edition 4 of IEC 60810, prepared by SC 34A "Lamps", of
IEC/TC 34 "Lamps and related equipment" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 60810:2015.
The following dates are fixed:
(dop) 2015-10-20
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2018-01-20
• latest date by which the national standards conflicting with
the document have to be withdrawn
This document supersedes EN 60810:2003.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 60810:2014 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60068-2-20 NOTE Harmonized as EN 60068-2-20.
IEC 60068-2-47 NOTE Harmonized as EN 60068-2-47.
IEC 60682 NOTE Harmonized as EN 60682.
---------------------- Page: 4 ----------------------
SIST EN 60810:2015
- 3 - EN 60810:2015
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60050 series International electrotechnical vocabulary - -
IEC 60061-1 - Lamp caps and holders togethe
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.