Thermistors - Directly heated positive step-function temperature coefficient - Part 1-4: Blank detail specification - Sensing application - Assessment level EZ

is a supplementary document to the generic specification and contains requirements for style and layout and minimum content of detail specifications. Detail specifications not complying with these requirements shall not be considered as being in accordance with IEC specifications nor shall they so be described. In the preparation of detail specifications the content of IEC 60738-1:2006, 1.4 shall be taken into account. This edition contains changes with respect to the referenced subclauses of the revised generic specification IEC 60738-1.

Thermistoren - Direkt geheizte temperaturabhängige Widerstände mit positivem Temperaturkoeffizienten - Teil 1-4: Vordruck für Bauartspezifikation - Anwendung als Messfühler - Bewertungsstufe EZ

Thermistances à basculement à coefficient de température positif à chauffage direct - Partie 1-4: Spécification particulière cadre - Application de la détection - Niveau d'assurance de la qualité EZ

L'IEC 60738-1-4:2008 est un document annexe à la spécification générique qui contient des exigences pour le modèle, la disposition et le contenu minimal des spécifications particulières. Les spécifications particulières ne répondant pas à ces règles ne doivent pas être considérées conformes aux spécifications de l'IEC et ne doivent pas être déclarées comme telles. Dans la préparation de la spécification particulière, le contenu de 1.4 de l'IEC 60738-1:2006, doit être pris en compte. Cette édition contient des modifications des paragraphes référencés de la spécification générique révisée IEC 60738-1. Cette publication doit être lue conjointement avec la CEI 60738-1:2009.

Termistorji - Neposredno ogrevani s stopenjskim pozitivnim temperaturnim koeficientom - 1-4. del: Okvirna podrobna specifikacija - Uporaba za zaznavala - Nivo ocenjevanja EZ (IEC 60738-1-4:2008)

General Information

Status
Published
Publication Date
28-Apr-2008
Withdrawal Date
28-Feb-2011
Current Stage
6060 - Document made available - Publishing
Start Date
29-Apr-2008
Completion Date
29-Apr-2008

Relations

Buy Standard

Standard
EN 60738-1-4:2008
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60738-1-4:2008
01-julij-2008
1DGRPHãþD
SIST EN 60738-1-4:2002
Termistorji - Neposredno ogrevani s stopenjskim pozitivnim temperaturnim
koeficientom - 1-4. del: Okvirna podrobna specifikacija - Uporaba za zaznavala -
Nivo ocenjevanja EZ (IEC 60738-1-4:2008)
Thermistors - Directly heated positive step-function temperature coefficient - Part 1-4:
Blank detail specification - Sensing application - Assessment level EZ (IEC 60738-1-
4:2008)
Thermistoren - Direkt geheizte temperaturabhängige Widerstände mit positivem
Temperaturkoeffizienten - Teil 1-4: Vordruck für Bauartspezifikation - Anwendung als
Messfühler - Bewertungsstufe EZ (IEC 60738-1-4:2008)
Thermistances à basculement à coefficient de température positif à chauffage direct -
Partie 1-4: Spécification particulière cadre - Application de la détection - Niveau
d'assurance de la qualité EZ (CEI 60738-1-4:2008)
Ta slovenski standard je istoveten z: EN 60738-1-4:2008
ICS:
31.040.30 Termistorji Thermistors
SIST EN 60738-1-4:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 60738-1-4

NORME EUROPÉENNE
April 2008
EUROPÄISCHE NORM

ICS 31.040.30 Supersedes EN 60738-1-4:1999


English version


Thermistors -
Directly heated positive step-function temperature coefficient -
Part 1-4: Blank detail specification -
Sensing application -
Assessment level EZ
(IEC 60738-1-4:2008)


Thermistances à basculement  Thermistoren -
à coefficient de température positif Direkt geheizte temperaturabhängige
à chauffage direct - Widerstände mit positivem
Partie 1-4: Spécification particulière Temperaturkoeffizienten -
cadre - Teil 1-4: Vordruck für Bauartspezifikation -
Application de la détection - Anwendung als Messfühler -
Niveau d'assurance de la qualité EZ Bewertungsstufe EZ
(CEI 60738-1-4:2008) (IEC 60738-1-4:2008)



This European Standard was approved by CENELEC on 2008-03-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60738-1-4:2008 E

---------------------- Page: 2 ----------------------

EN 60738-1-4:2008 - 2 -
Foreword
The text of document 40/1877/FDIS, future edition 2 of IEC 60738-1-4, prepared by IEC TC 40,
Capacitors and resistors for electronic equipment, was submitted to the IEC-CENELEC parallel vote and
was approved by CENELEC as EN 60738-1-4 on 2008-03-01.
This European Standard supersedes EN 60738-1-4:1999.
EN 60738-1-4:2008 contains changes with respect to the referenced subclauses of the revised generic
specification EN 60738-1.
This standard is to be used in conjunction with EN 60738-1.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-12-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-03-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60738-1-4:2008 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 60738-1-4:2008
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the lates
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.