EN 60335-2-69:2009

Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use

TC request: dop/dow = 2009-12-29 (i.e. date of application of new MD) * Superseded by EN 60335-2-69:2012

Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-69: Besondere Anforderungen für Staub- und Wassersauger einschließlich kraftbetriebener Bürsten für den gewerblichen Gebrauch

Appareils électrodomestiques et analogues - Sécurité - Partie 2-69: Règles particulières pour les aspirateurs fonctionnant en présence d'eau ou à sec, y compris les brosses motorisées, à usage commercial

Gospodinjski in podobni električni aparati - Varnost - 2-69. del: Posebne zahteve za sesalnike za suho in mokro sesanje, vključno s krtačo, za industrijsko in komercialno uporabo (IEC 60335-2-69:2002 + A1:2004 + A2:2007, spremenjen)

General Information

• Status: Withdrawn
• Publication Date: 21-Sep-2009
• Withdrawal Date: 28-Dec-2009
• ICS: 97.080 - Cleaning appliances
• Technical Committee: CLC/TC 61 - Safety of household and similar electrical appliances
• Drafting Committee: IEC/SC 61J - IEC_SC_61J
• Parallel Committee: IEC/SC 61J - IEC_SC_61J
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 28-Mar-2015
• Completion Date: 28-Mar-2015
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN 60335-2-69:2009 - Household and similar electrical appliances - Safety -- Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for industrial and commercial use

Relations

• Replaces: EN 60335-2-69:2003/A1:2004 - Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for industrial and commercial use
• Effective Date: 29-Jan-2023
• Replaces: EN 60335-2-69:2003/A2:2008 - Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for industrial and commercial use
• Effective Date: 29-Jan-2023
• Replaces: EN 60335-2-69:2003 - Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for industrial and commercial use
• Effective Date: 29-Jan-2023
• Replaced By: EN 60335-2-69:2012 - Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush for commercial use
• Effective Date: 29-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.HPHQMHQSicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke -- Teil 2-69: Besondere Anforderungen für Staub- und Wassersauger einschließlich kraftbetriebener Bürsten für industrielle und gewerbliche ZweckeAppareils électrodomestiques et analogues - Sécurité -- Partie 2-69: Règles particulières pour les aspirateurs fonctionnant en présence d'eau ou à sec, y compris les brosses motorisées, à usage industriel et commercialHousehold and similar electrical appliances - Safety -- Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for industrial and commercial use97.080Aparati za nego talFloor treatment appliancesICS:Ta slovenski standard je istoveten z:EN 60335-2-69:2009SIST EN 60335-2-69:2009en,de01-december-2009SIST EN 60335-2-69:2009SLOVENSKI
STANDARDSIST EN 60335-2-69:2003/A2:2008SIST EN 60335-2-69:2003/A1:2005SIST EN 60335-2-69:20031DGRPHãþD

EUROPEAN STANDARD EN 60335-2-69 NORME EUROPÉENNE
EUROPÄISCHE NORM September 2009
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: Avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60335-2-69:2009 E
ICS 97.080 Supersedes EN 60335-2-69:2003 + A1:2004 + A2:2008
English version
Household and similar electrical appliances -
Safety -
Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use (IEC 60335-2-69:2002 + A1:2004 + A2:2007, modified)
Appareils électrodomestiques
et analogues -
Sécurité -
Partie 2-69: Règles particulières
pour les aspirateurs fonctionnant
en présence d'eau ou à sec,
y compris les brosses motorisées,
à usage commercial (CEI 60335-2-69:2002 + A1:2004 + A2:2007, modifiés)
Sicherheit elektrischer Geräte
für den Hausgebrauch
und ähnliche Zwecke -
Teil 2-69: Besondere Anforderungen
für Staub- und Wassersauger einschließlich kraftbetriebener Bürsten
für den gewerblichen Gebrauch (IEC 60335-2-69:2002 + A1:2004 + A2:2007, modifiziert)
This European Standard was approved by CENELEC on 2009-09-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
Foreword In the light of the necessity to adapt EN 60335-2-69 with regard to the requirements of the Machinery Directive 2006/42/EC, a draft was prepared by CENELEC TC61/WG6/J in co-operation with the MD Consultant, taking also into account the results of CENELEC TC61/WG6 work on EN 60335-1. The approach to amend EN 60335-2-69:2003 aiming toward
listing the standard under the MD was discussed and approved during the Kista meeting of CENELEC TC 61 in June 2008 (see CLC/TC 61/SEC/1649), when it was decided to submit a draft for an amendment to the Unique Acceptance Procedure. The draft was circulated as FprAC in December 2008 and was approved by CENELEC as a new edition of EN 60335-2-69 on 2009-09-01. This European Standard supersedes EN 60335-2-69:2003 + A1:2004 + A2:2008. In this European Standard the common modifications to the International Standard IEC 60335-2-69:2002 + A1:2004 + A2:2007 are indicated by a vertical line in the left margin of the text. The following dates are applicable: – latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement
(dop)
2009-12-29 – latest date by which the national standards conflicting with the EN have to be withdrawn
(dow)
2009-12-29 This Part 2 has to be used in conjunction with EN 60335-1, Household and similar electrical appliances – Safety – Part 1: General requirements. It was established on the basis of the 2002 edition of that standard. Amendments and revisions of Part 1 have also to be taken into account and the dates when such changes become applicable will be stated in the relevant amendment or revision of Part 1. This Part 2 supplements or modifies the corresponding clauses of EN 60335-1, so as to convert it into the European Standard: Safety requirements for wet and dry vacuum cleaners, including power brush, for commercial use. When a particular subclause of Part 1 is not mentioned in this Part 2, that subclause applies. When this standard states "addition", "modification" or "replacement", the relevant text of Part 1 is to be adapted accordingly.
This European Standard has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association and covers essential requirements of EC Directive 2006/42/EC. See Annex ZZ. NOTE 1 The following numbering system is used:
– subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1; – unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a replaced clause or subclause; – additional annexes are lettered AA, BB, etc.; – subclauses, notes and annexes that are additional to those in the IEC standard are prefixed with the letter Z. SIST EN 60335-2-69:2009

– 3 – EN 60335-2-69:2009 NOTE 2 The following print types are used: – requirements: in roman type; – test specifications: in italic type; – notes: in small roman type. Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated noun are also in bold. Special national conditions causing a deviation from this European Standard are listed in Annex ZA and are in addition to those in EN 60335-1. There are no national deviations from this European Standard, other than those listed in Annex ZB to EN 60335-1. ____________
Contents Introduction .6 1 Scope .7 2 Normative references .8 3 Definitions .8 4 General requirement . 11 5 General conditions for the tests . 11 6 Classification . 11 7 Marking and instructions . 12 8 Protection against access to live parts . 14 9 Starting of motor-operated appliances . 14 10 Power input and current . 14 11 Heating . 15 12 Void . 15 13 Leakage current and electric strength at operating temperature . 15 14 Transient overvoltages . 15 15 Moisture resistance . 15 16 Leakage current and electric strength . 17 17 Overload protection of transformers and associated circuits . 17 18 Endurance . 17 19 Abnormal operation . 17 20 Stability and mechanical hazards . 18 21 Mechanical strength . 19 22 Construction . 21 23 Internal wiring . 23 24 Components . 23 25 Supply connection and external flexible cords . 23 26 Terminals for external conductors . 25 27 Provision for earthing . 25 28 Screws and connections . 25 29 Clearances, creepage distances and solid insulation . 25 30 Resistance to heat and fire . 25 31 Resistance to rusting . 25 32 Radiation, toxicity and similar hazards . 25
Annex A (normative)
Routine tests . 29 Annex AA (normative)
Particular requirements for vacuum cleaners and dust extractors for the collection of hazardous dusts . 29 Annex BB (informative)
List of dusts which present an explosion risk
when subject to ignition conditions . 41 Annex CC (normative)
Particular requirements for vacuum cleaners and dust extractors for the
collection of dusts which present an explosion risk . 47 SIST EN 60335-2-69:2009

– 5 – EN 60335-2-69:2009 Annex DD (normative)
Particular requirements for vacuum cleaners for use in ESD protected areas . 54 Annex ZA (normative)
Special national conditions . 57 Annex ZC
(normative)
Normative references to international publications
with their corresponding European publications . 57 Annex ZE (informative)
Specific additional requirements for appliances
and machines intended for commercial use . 59 Annex ZZ (informative)
Coverage of Essential Requirements of Directive 2006/42/EC . 59
Bibliography . 60
Table 12 – Pull force and torque . 24 Table AA.1 – Penetration limits . 33 Table BB.1 – Explosion parameters . 41
Figure 101 – Impact test apparatus . 26 Figure 102 – Apparatus for testing the abrasion resistance of current-carrying hoses . 27 Figure 103 – Apparatus for testing the resistance to flexing of current-carrying hoses . 27 Figure 104 – Configuration of the hose for the freezing treatment . 28 Figure 105 – Flexing positions for the hose after removal from the freezing cabinet . 28 Figure AA.1.1 – Warning label for dust class H machines . 38 Figure AA.1.2 – Warning label for dust class L and dust M machines . 38 Figure AA.2 – Test method for essential filter material . 39 Figure AA.3 – In situ essential filter element test . 39 Figure AA.4 – Assembled machine test .
...