EN 60061-1:1993/A27:2014

Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

Subscribe to IEC 60061 Database to access the full and updated content of the series.

Lampensockel und -fassungen sowie Lehren zur Kontrolle der Austauschbarkeit und Sicherheit - Teil 1: Lampensockel

Culots de lampes et douilles ainsi que calibres pour le contrôle de l'interchangeabilité et de la sécurité - Partie 1: Culots de lampes

Subscribe to IEC 60061 Database to access the full and updated content of the series.

Vznožki in okovi žarnic in sijalk skupaj s kalibri za kontrolo izmenljivosti in varnosti - 1. del: Vznožki žarnic in sijalk - Dopolnilo A27 (IEC 60061-1:1969/A27:2001, spremenjen)

Vsebuje priporočila IEC v zvezi z vznožki in okovi žarnic in sijalk , ki so danes v splošni rabi, skupaj z ustreznimi kalibri, s ciljem zagotoviti mednarodno medsebojno zamenljivost. Ponazorjeni kalibri, čeprav načeloma splošno sprejeti, niso nujno edina oblika, v kateri so lahko narejeni. Ponazorjeni kalibri, čeprav načeloma splošno sprejeti, niso nujno edina oblika, v kateri so lahko narejeni.

General Information

• Status: Published
• Publication Date: 31-Jul-2014
• Withdrawal Date: 08-Jun-2017
• ICS: 29.140.10 - Lamp caps and holders
• Technical Committee: CLC/TC 34 - 'Lamps and related equipment
• Drafting Committee: IEC/SC 34B - IEC_SC_34B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 01-Aug-2014
• Completion Date: 01-Aug-2014
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 2009/125/EC - Directive 2005/32/EC of the European Parliament and of the Council of 6 July 2005 establishing a framework for the setting of ecodesign requirements for energy-using products and amending Council Directive 92/42/EEC and Directives 96/57/EC and 2000/55/EC of the European Parliament and of the Council
• Ref Project: SIST EN 60061-1:1999/A27:2014 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

Relations

• Replaces: EN 60061-1:1993/A27:2001 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
• Effective Date: 28-Jan-2023
• Amends: EN 60061-1:1993 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-oktober-2014
1DGRPHãþD
SIST EN 60061-1:1999/A27:2002
Vznožki in okovi žarnic in sijalk skupaj s kalibri za kontrolo izmenljivosti in
varnosti - 1. del: Vznožki žarnic in sijalk - Dopolnilo A27 (IEC 60061-
1:1969/A27:2001, spremenjen)
Lamp caps and holders together with gauges for the control of interchangeability and
safety - Part 1: Lamp caps
Lampensockel und -fassungen sowie Lehren zur Kontrolle der Austauschbarkeit und
Sicherheit -- Teil 1: Lampensockel
Culots de lampes et douilles ainsi que calibres pour le contrôle de l'interchangeabilité et
de la sécurité -- Partie 1: Culots de lampes
Ta slovenski standard je istoveten z: EN 60061-1:1993/A27:2014
ICS:
29.140.10 Grla in držala žarnic Lamp caps and holders
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60061-1:1993/A27

NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2014
ICS 29.140.10 Supersedes EN 60061-1:1993/A27:2001
English Version
Lamp caps and holders together with gauges for the control of
interchangeability and safety - Part 1: Lamp caps
(IEC 60061-1:1969/A27:2001 , modified)
Culots de lampes et douilles ainsi que calibres pour le Lampensockel und -fassungen sowie Lehren zur Kontrolle
contrôle de l'interchangeabilité et de la sécurité - der Austauschbarkeit und Sicherheit - Teil 1: Lampensockel
Partie 1: Culots de lampes (IEC 60061-1:1969/A27:2001 , modifiziert)
(CEI 60061-1:1969/A27:2001 , modifiée)
This amendment A27 modifies the European Standard EN 60061-1:1993; it was approved by CENELEC on 2014-06-09. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60061-1:1993/A27:2014 E

Foreword
This document (EN 60061-1:1993/A27:2014) consists of the text of IEC 60061-1:1969/A27:2001
prepared by SC 34B "Lamp caps and holders" of IEC/TC 34 "Lamps and related equipment", together
with the common modifications prepared by CLC/TC 34Z "Luminaires and associated equipment".
The following dates are fixed:
– latest date by which the document has to be implemented (dop) 2015-06-09
at national level by publication of an identical
national standard or by endorsement
– latest date by which the national standards conflicting (dow) 2017-06-09
with the document have to be withdrawn

This document supersedes EN 60061-1:1993/A27:2001.
EN 60061-1:1993/A27:2001: Sheet 7004-130-1 is deleted.
This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment
Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC).

- 3 - EN 60061-1:1993/A27:2014
Endorsement notice
The text of the International Standard IEC 60061-1:1969/A27:2001 was approved by CENELEC as a
European Standard with agreed common modifications.
COMMON MODIFICATIONS
Instructions' sheet
Under item 3, delete "7004-130-1 (pages 1/2 and 2/2)".
Contents (page 4)
Delete the last entry "Skirted screw caps E26/50x39 & E26/51x39………  7004-130-1".
Contents by designation
On page 1/3, delete "E26/50x39 & E26/51x39         7004-130-1".
Sheets
Delete Sheet 7004-130-1, pages 1/2 and 2/2.

NORME CEI
INTERNATIONALE IEC
INTERNATIONAL 60061-1
STANDARD
AMENDEMENT 27
AMENDMENT 27
2001-10
Amendement 27
Culots de lampes et douilles ainsi que calibres
pour le contrôle de l'interchangeabilité
et de la sécurité –
Première partie:
Culots de lampes
Amendment 27
Lamp caps and holders together with
gauges for the control of interchangeability
and safety –
Part 1:
Lamp caps
Les feuilles de cet amendement sont à insérer dans la
CEI 60061-1 (1969)
The sheets contained in this amendment are to be inserted

in IEC 60061-1 (1969)
 IEC 2001 Droits de reproduction réservés  Copyright - all rights reserved
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: [phone] e-mail: [e-mail] IEC web site http: //www.iec.ch
CODE PRIX
J
PRICE CODE
Pour prix, voir catalogue en vigueur
For price, see current catalogue

60061-1 Amend. 27 © CEI/IEC:2001

INSTRUCTIONS POUR L'INSERTION DES INSTRUCTIONS FOR THE INSERTION OF NEW

NOUVELLES PAGES ET FEUILLES DE NORMES PAGES AND STANDARD SHEETS IN IEC 60061-1
DANS LA CEI 60061-1
1. Retirer la page de titre existante, les pages 1, 2 et 3 1. Remove existing title page, existing pages 1, 2 and

existantes et le sommaire par d ésignation existant 3 and existing contents by designation (pages 1/3,
(pages 1/3, 2/3 et 3/3), et insérer la nouvelle page 2/3 and 3/3) and insert in their place new title page,
de titre, les nouvelles pages 1, 2, 3 et 4 et le new pages 1, 2, 3 a nd 4 and new contents by

nouveau sommaire par désignation (pages 1/3 , 2/3 designation (pages 1/3, 2/3 and 3/3).

et 3/3).
2. Retirer les feuilles existantes 2. Remove existing sheets
7004-59-5 (pages 1/2 et 2/2) 7004-59-5 (pages 1/2 and 2/2)
7004-14-7 (pages 1/2 et 2/2) 7004-14-7 (pages 1/2 and 2/2)
7004-5-4 (pages 1/2 et 2/2) 7004-5-4 (pages 1/2 and 2/2)
et les remplacer par les nouvelles feuilles and insert in their place new sheets
7004-59-6 (pages 1/2 et 2/2) 7004-59-6 (pages 1/2 and 2/2)
7004-14-8 (pages 1/2 et 2/2) 7004-14-8 (pages 1/2 and 2/2)
7004-5-5 (pages 1/2 et 2/2) 7004-5-5 (pages 1/2 and 2/2)
3. Insérer les nouvelles feuilles 3. Insert new sheets
7004-129-1 (page 1) 7004-129-1 (page 1)
7004-130-1 (pages 1/2 et 2/2) 7004-130-1 (pages 1/2 and 2/2)

60061-1 Amend. 27 © CEI/IEC:2001

AVANT-PROPOS
Cet amendement a été préparé par le sous-comité 34B: Culots et douilles, du comité d’études 34

de la CEI: Lampes et équipements associés.

Le texte de cet amendement est issu des documents suivants:

FDIS Rapport de vote
34B/949A/FDIS 34B/957/RVD
Le rapport de vote indiqué dans le tableau ci-dessus donne toute information sur le vote ayant

abouti à l’approbation de cet amendement.
Le comité a décidé que le contenu de la publication de base et de ses amendements ne sera pas
modifié avant 2002-01. A cette date, la publication sera
• reconduite;
• supprimée;
•
remplacée par une édition révisée, ou
• amendée.
__________
FOREWORD
This amendment has been prepared by subcommittee 34B: Lamp caps and holders, of IEC
technical committee 34: Lamps and related equipment.
The text of this amendment is based on the following documents:
FDIS Report on voting
34B/949A/FDIS 34B/957/RVD
Full information on the voting for the approval of this amendment can be found in the report on
voting indicated in the above table.

The committee has decided that the contents of the base publication and its amendments will
remain unchanged until 2002-01. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
•
amended.
__________
60061-1 Amend. 27  CEI/IEC:2001 – 1 –

SOMMAIRE CONTENTS
SOMMAIRE PAR DÉSIGNATION .  Pages CONTENTS BY DESIGNATION .      Page

PRÉAMBULE. 4 FOREWORD. 5

PRÉFACE . 4 PREFACE . 5

Feuilles Sheet
Culots à deux broches G1.27 et GX1.27. 7004-2-2 Bi-pin caps G1.27 and GX1.27. 7004-2-2

Culots à deux broches G2.54 et BX2.54. 7004-3-2 Bi-pin caps G2.54 and GX2.54. 7004-3-2

Culots à deux broches G3.17 . 7004-4-2 Bi-pin caps G3.17. 7004-4-2

Culots préfocus PX26d. 7004-5-5 Prefocus caps PX26d. 7004-5-5

Culots à vis E11. 7004-6-1 Screw caps E11 . 7004-6-1
Culots à vis EY10. 7004-7-1 Screw caps EY10. 7004-7-1
Culots à baïonnette BAX9s . 7004-8-1 Bayonet caps BAX9s. 7004-8-1
Culots à baïonnette BAY9s . 7004-9-1 Bayonet caps BAY9s. 7004-9-1
Culots à baïonnette B22d. 7004-10-6 Bayonet caps B22d. 7004-10-6
Culot à baïonnette B22d-3(90°/135°)/25 x 26 . 7004-10A-2 Bayonet cap B22d-3(90°/135°)/25 x 26. 7004-10A-2
Culots à baïonnette B15. 7004-11-5 Bayonet caps B15. 7004-11-5
Culots à baïonnette BA15. 7004-11A-9 Bayonet caps BA15 . 7004-11A-9
Culots à baïonnette BAY15d . 7004-11B-7 Bayonet caps BAY15d . 7004-11B-7
Culots à baïonnette BAZ15d . 7004-11C-2 Bayonet caps BAZ15d. 7004-11C-2
Culots à baïonnette BA15s-3 . 7004-11D-1 Bayonet caps BA15s-3 . 7004-11D-1
Culots à baïonnette BA20. 7004-12-7 Bayonet caps BA20 . 7004-12-7
Culots à baïonnette pour automobiles Bayonet automobile caps
BA21-3 (120°). 7004-13-4 BA21-3 (120°). 7004-13-4
Culots à baïonnette BA9. 7004-14-8 Bayonet caps BA9 . 7004-14-8
Culot à baïonnette BA7 . 7004-15-2 Bayonet cap BA7. 7004-15-2
Culot à baïonnette BY22d . 7004-17-3 Bayonet cap BY22d. 7004-17-3
Culots à baïonnette BAX15d . 7004-18-1 Bayonet caps BAX15d . 7004-18-1
Culots à baïonnette BAU15s . 7004-19-1 Bayonet caps BAU15s. 7004-19-1
Connecteur des lampes terminées G16d . 7004-20-2 Termination on finished lamps G16d . 7004-20-2
Culots à vis E27. 7004-21-9 Screw caps E27 . 7004-21-9
Culots à vis E26. 7004-21A-2 Screw caps E26 . 7004-21A-2
Culots à vis E10. 7004-22-6 Screw caps E10 . 7004-22-6
Culots à vis E14. 7004-23-6 Screw caps E14 . 7004-23-6
Culots à vis E40. 7004-24-6 Screw caps E40 . 7004-24-6
Culots à vis E39. 7004-24A-1 Screw caps E39 . 7004-24A-1
Culot à vis E5 . 7004-25-3 Screw cap E5. 7004-25-3
Culot à vis E17/20 . 7004-26-2 Screw cap E17/20. 7004-26-2
Culot à vis E27/51 x 39 . 7004-27-3 Screw cap E27/51 x 39 . 7004-27-3
Culot à vis E12 . 7004-28-2 Screw cap E12. 7004-28-2
Culot à vis à double contact E26d. 7004-29-2 Double contact screw cap
...