EN IEC 62885-5:2018
(Main)Surface cleaning appliances - Part 5: High pressure cleaners and steam cleaners for household and commercial use - Methods for measuring performance
Surface cleaning appliances - Part 5: High pressure cleaners and steam cleaners for household and commercial use - Methods for measuring performance
IEC 62885-5:2018 lists the characteristic performance parameters for high pressure cleaners and steam cleaners in accordance with IEC 60335-2-79. The intent is to serve the manufacturers in describing parameters that fit in their manuals and in their literature. This can include all or some of the parameters listed in this definition document.
Geräte zur Oberflächenreinigung - Teil 5: Hochdruckreiniger und Dampfreiniger für den Hausgebrauch und den gewerblichen Gebrauch - Prüfverfahren zur Bestimmung der Gebrauchseigenschaften
Appareils de nettoyage des surfaces - Partie 5: Appareils de nettoyage à haute pression et appareils de nettoyage à vapeur à usage domestique et commercial - Méthodes de mesure de l'aptitude à la fonction
L’IEC 62885-5:2018 donne la liste des paramètres caractéristiques d'aptitude à la fonction pour les appareils de nettoyage à haute pression et les appareils de nettoyage à vapeur selon l'IEC 60335-2-79. Elle est destinée aux fabricants pour la description des paramètres qui rentrent dans leurs manuels et leurs documentations. Ces paramètres peuvent inclure tout ou partie des paramètres dont la liste est donnée dans le présent document de définition.
Naprave za površinsko čiščenje - 5. del: Visokotlačni in parni čistilniki za gospodinjsko in komercialno uporabo - Metode za merjenje učinkovitosti
Standard IEC 62885-5:2018 navaja značilne parametre učinkovitosti za visokotlačne in parne čistilnike v skladu s standardom IEC 60335-2-79.
Njegov namen je pomoč proizvajalcem pri opisovanju parametrov, ki jih navajajo v svojih priročnikih in v literaturi. Sem lahko spadajo vsi ali nekateri parametri, navedeni v tem dokumentu z definicijami.
General Information
Overview
EN IEC 62885-5:2018 - Surface cleaning appliances Part 5 - specifies methods for measuring performance of high pressure cleaners and steam cleaners for household and commercial use. Published by CLC/CENELEC and aligned with IEC 62885-5:2018, the standard lists characteristic performance parameters intended for manufacturers to report in manuals and product literature. It defines test conditions, measurement methods and the scope of parameters that may be declared (cleaning efficiency, productivity, emissions, etc.).
Key topics and technical requirements
- Scope and purpose: Defines which performance parameters apply to high pressure cleaners and steam cleaners in accordance with IEC 60335-2-79.
- General test conditions: Standard atmosphere is specified (23 ± 2 °C, relative humidity 50 ± 5 %, air pressure 86–106 kPa) to ensure repeatability and reproducibility.
- Equipment and operation: Tests use the primary trigger gun supplied, rated voltage (±1 %) and normal manufacturer settings. Hose length and diameter limits are specified (hose normally ≤ 10 m; nominal diameter ≤ DN 12 unless manufacturer’s standard differs and is reported).
- Performance measurements:
- Cleaning efficiency tests for cold-water and hot-water high pressure cleaners.
- Productivity tests and an informative annex on realistic productivity measurement.
- Oil-heated cleaners: specific procedures for thermal exhaust loss, CO emissions and dust emissions measurement.
- Measurement accuracy: The standard includes measurement tolerances and reporting requirements (measurement device tolerances and test tolerances are defined within the document).
- Normative references: Includes IEC 60335-2-79 (safety requirements for high pressure/steam cleaners) and ISO 22968 (forced draught oil burners) where relevant.
Applications and who uses it
EN IEC 62885-5:2018 is primarily used by:
- Manufacturers of high pressure and steam cleaners to define and declare product performance in manuals, datasheets and marketing literature.
- Test laboratories for consistent, repeatable performance testing and certification preparation.
- Product designers and R&D teams to benchmark cleaning efficiency and emissions during development.
- Regulatory bodies, procurement teams and large commercial users that require standardized performance data for purchase specifications and comparative evaluation.
- Technical writers and marketers preparing compliant product documentation and claims.
Related standards
- IEC 60335-2-79 - Safety: particular requirements for high pressure and steam cleaners (normative reference).
- ISO 22968 - Relevant for testing oil-fired components (referenced for oil-heated cleaner tests).
Keywords: EN IEC 62885-5:2018, high pressure cleaners, steam cleaners, performance measurement, cleaning efficiency, productivity, IEC 60335-2-79.
Frequently Asked Questions
EN IEC 62885-5:2018 is a standard published by CLC. Its full title is "Surface cleaning appliances - Part 5: High pressure cleaners and steam cleaners for household and commercial use - Methods for measuring performance". This standard covers: IEC 62885-5:2018 lists the characteristic performance parameters for high pressure cleaners and steam cleaners in accordance with IEC 60335-2-79. The intent is to serve the manufacturers in describing parameters that fit in their manuals and in their literature. This can include all or some of the parameters listed in this definition document.
IEC 62885-5:2018 lists the characteristic performance parameters for high pressure cleaners and steam cleaners in accordance with IEC 60335-2-79. The intent is to serve the manufacturers in describing parameters that fit in their manuals and in their literature. This can include all or some of the parameters listed in this definition document.
EN IEC 62885-5:2018 is classified under the following ICS (International Classification for Standards) categories: 97.080 - Cleaning appliances. The ICS classification helps identify the subject area and facilitates finding related standards.
You can purchase EN IEC 62885-5:2018 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CLC standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2018
1DSUDYH]DSRYUãLQVNRþLãþHQMHGHO9LVRNRWODþQLLQSDUQLþLVWLOQLNL]D
JRVSRGLQMVNRLQNRPHUFLDOQRXSRUDER0HWRGH]DPHUMHQMHXþLQNRYLWRVWL
Surface cleaning appliances - Part 5: High pressure cleaners and steam cleaners for
household and commercial use - Methods for measuring performance
Oberflächenreinigungsgeräte - Teil 5: Hochdruckreiniger und Dampfreiniger -
Prüfverfahren zur Bestimmung der Gebrauchseigenschaften
Appareils de nettoyage des surfaces - Partie 5: Appareils de nettoyage à haute pression
et appareils de nettoyage à vapeur à usage domestique et commercial - Méthodes de
mesure de l'aptitude à la fonction
Ta slovenski standard je istoveten z: EN IEC 62885-5:2018
ICS:
97.080 $SDUDWL]DþLãþHQMH Cleaning appliances
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 62885-5
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2018
ICS 97.080
English Version
Surface cleaning appliances - Part 5: High pressure cleaners
and steam cleaners for household and commercial use -
Methods for measuring performance
(IEC 62885-5:2018)
Appareils de nettoyage des surfaces - Partie 5: Appareils Oberflächenreinigungsgeräte - Teil 5: Hochdruckreiniger
de nettoyage à haute pression et appareils de nettoyage à und Dampfreiniger - Prüfverfahren zur Bestimmung der
vapeur à usage domestique et commercial - Méthodes de Gebrauchseigenschaften
mesure de l'aptitude à la fonction (IEC 62885-5:2018)
(IEC 62885-5:2018)
This European Standard was approved by CENELEC on 2018-10-03. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62885-5:2018 E
European foreword
The text of document 59F/340/CDV, future edition 1 of IEC 62885-5, prepared by SC 59F "Surface
cleaning appliances" of IEC/TC 59 "Performance of household and similar electrical appliances" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 62885-5:2018.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2019-07-03
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2021-10-03
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62885-5:2018 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60335-1 NOTE Harmonized as EN 60335-1
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60335-2-79 2016 Household and similar electrical appliances EN 60335-2-79 -
- Safety - Part 2-79: Particular
requirements for high pressure cleaners
and steam cleaners
ISO 22968 - EN 267 -
Under preparation. Stage at the time of publication: FprEN 60335-2-79:2016.
IEC 62885-5 ®
Edition 1.0 2018-08
INTERNATIONAL
STANDARD
Surface cleaning appliances –
Part 5: High pressure cleaners and steam cleaners for household and
commercial use – Methods for measuring performance
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 97.080 ISBN 978-2-8322-5969-6
– 2 – IEC 62885-5:2018 © IEC 2018
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 General conditions for testing . 5
4.1 Atmospheric conditions . 5
4.2 Test equipment and materials . 6
4.2.1 Cold and hot water high pressure cleaner . 6
4.3 Voltage and frequency . 6
4.4 Equipment of the high pressure cleaner . 6
4.5 Operation of the high pressure cleaner . 6
4.6 Number of samples . 7
5 High pressure cleaner efficiency tests . 7
5.1 Cleaning efficiency of cold-water high pressure cleaners . 7
5.2 Cleaning efficiency of hot-water high pressure cleaners . 7
5.3 Efficiency tests of oil-heated high pressure cleaners . 7
5.3.1 General . 7
5.3.2 Thermal exhaust loss of oil fired high pressure cleaner . 7
5.3.3 Determination CO emissions of oil-heated high pressure cleaner . 8
5.3.4 Determination dust emissions of oil-heated high pressure cleaners . 9
6 Productivity . 10
Annex A (informative) Realistic productivity . 11
Bibliography . 12
Table 1 – Measurement tolerances for the measuring device . 8
Table 2 – Measurement tolerances during the measurement . 8
Table 3 – Definition of the different figures . 9
IEC 62885-5:2018 © IEC 2018 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SURFACE CLEANING APPLIANCES –
Part 5: High pressure cleaners and steam cleaners for household
and commercial use – Methods for measuring performance
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62885-5 has been prepared by subcommittee SC 59F: Surface
cleaning appliances, of IEC technical committee TC 59: Performance of household and similar
electrical appliances.
The text of this International Standard is based on the following documents:
CDV Report on voting
59F/340/CDV 59F/348/RVC
Full information on the voting for the approval of this International Standard can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
– 4 – IEC 62885-5:2018 © IEC 2018
A list of all parts in the IEC 62885 series, published under the general title Surface cleaning
appliances, can be found on the IEC website.
In this standard, the following print types are used:
• terms defined in Clause 3 of IEC 60335-2-79:2016: Arial bold.
The committee has decided that the contents of this document
...
기사 제목: EN IEC 62885-5:2018 - 표면 청소 기기 - 파트 5: 가정 및 상업용 고압 청소기 및 스팀 청소기 - 성능 측정 방법 기사 내용: IEC 62885-5:2018은 IEC 60335-2-79에 따라 고압 청소기 및 스팀 청소기의 특성적인 성능 파라미터를 나열하고 있습니다. 목적은 제조업체들에게 제품 매뉴얼 및 문학에 적합한 매개변수를 설명하는 데 도움을 주는 것입니다. 이 정의 문서에 기재된 매개변수는 제조업체들이 전체 또는 일부 포함할 수 있습니다.
記事タイトル:EN IEC 62885-5:2018 - 表面清掃機器 - 第5部:家庭および商業用高圧洗浄機およびスチーム洗浄機 - 性能測定方法 記事内容:IEC 62885-5:2018では、IEC 60335-2-79に準拠した高圧洗浄機およびスチーム洗浄機の特性的な性能パラメータがリストアップされています。これは、製造業者が製品のマニュアルや文献で使用するためのパラメータを記述するためのものです。この定義文書に記載されているパラメータは、製造業者が全体または一部を含めることができます。
The article discusses the EN IEC 62885-5:2018 standard, which provides a list of performance parameters for high-pressure cleaners and steam cleaners. These parameters can be used by manufacturers to describe the capabilities of their products in their manuals and literature. The parameters outlined in this document can be included in whole or in part by the manufacturers.








Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...