Maritime navigation and radiocommunication equipment and systems - Automatic Identification System (AIS) - Part 1: AIS Base Stations - Minimum operational and performance requirements, methods of testing and required test results

Navigations- und Funkkommunikationsgeräte und -systeme für die Seeschifffahrt – Automatische Identifikationssysteme (AIS) - Teil 1: AIS-Basisstationen - Mindest-Betriebs- und -Leistungsanforderungen, Prüfverfahren und geforderte Prüfergebnisse

Equipements et systèmes de navigation et de radiocommunication maritimes - Systèmes d'identification automatique (AIS) - Partie 1: Stations de base AIS - Exigences minimales opérationnelles et de performance, méthodes de mesure et résultats de test minimum attendus

Pomorska navigacijska in radiokomunikacijska oprema in sistemi - Sistemi za avtomatično identifikacijo (AIS) - 1. del: Bazne postaje AIS - Minimalne operativne in tehnične zahteve, preskusne metode in zahtevani rezultati preskušanj (IEC 62320-1:2007/A1:2008)

General Information

Status
Withdrawn
Publication Date
04-Feb-2009
Withdrawal Date
31-Jan-2012
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
24-Feb-2018
Completion Date
24-Feb-2018

Relations

Buy Standard

Amendment
EN 62320-1:2008/A1:2009
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-april-2009
3RPRUVNDQDYLJDFLMVNDLQUDGLRNRPXQLNDFLMVNDRSUHPDLQVLVWHPL6LVWHPL]D
DYWRPDWLþQRLGHQWLILNDFLMR $,6 GHO%D]QHSRVWDMH$,60LQLPDOQHRSHUDWLYQH
LQWHKQLþQH]DKWHYHSUHVNXVQHPHWRGHLQ]DKWHYDQLUH]XOWDWLSUHVNXãDQM ,(&
$
Maritime navigation and radiocommunication equipment and systems - Automatic
Identification System (AIS) - Part 1: AIS Base Stations - Minimum operational and
performance requirements, methods of testing and required test results (IEC 62320-
1:2007/A1:2008)
Navigations- und Funkkommunikationsgeräte und -systeme für die Seeschifffahrt –
Automatische Identifikationssysteme (AIS) - Teil 1: AIS-Basisstationen - Mindest-
Betriebs- und -Leistungsanforderungen, Prüfverfahren und geforderte Prüfergebnisse
(IEC 62320-1:2007/A1:2008)
Equipements et systèmes de navigation et de radiocommunication maritimes - Systèmes
d'identification automatique (AIS) - Partie 1: Stations de base AIS - Exigences minimales
opérationnelles et de performance, méthodes de mesure et résultats de test minimum
attendus (CEI 62320-1:2007/A1:2008)
Ta slovenski standard je istoveten z: EN 62320-1:2007/A1:2009
ICS:
47.020.70 Navigacijska in krmilna Navigation and control
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 62320-1/A1
NORME EUROPÉENNE
February 2009
EUROPÄISCHE NORM
ICS 47.020.70
English version
Maritime navigation and radiocommunication equipment and systems -
Automatic Identification System (AIS) -
Part 1: AIS Base Stations -
Minimum operational and performance requirements,
methods of testing and required test results
(IEC 62320-1:2007/A1:2008)
Equipements et systèmes de navigation Navigations- und
et de radiocommunication maritimes - Funkkommunikationsgeräte
Systèmes d'identification automatique und -systeme für die Seeschifffahrt -
(AIS) - Automatische Identifikationssysteme
Partie 1: Stations de base AIS - (AIS) -
Exigences minimales opérationnelles Teil 1: AIS-Basisstationen -
et de performance, méthodes de mesure Mindest-Betriebs- und
et résultats de test minimum attendus -Leistungsanforderungen, Prüfverfahren
(CEI 62320-1:2007/A1:2008) und geforderte Prüfergebnisse
(IEC 62320-1:2007/A1:2008)
This amendment A1 modifies the European Standard EN 62320-1:2007; it was approved by CENELEC on
2009-02-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: avenue Marnix 17, B - 1000 Brussels

© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62320-1:2007/A1:2009 E

Foreword
The text of document 80/522/CDV, future amendment 1 to IEC 62320-1:2007, prepared by IEC TC 80
"Maritime navigation and radiocommunication equipment and systems", was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN 62320-1:2007 on
2009-02-01.
The following dates were fixed:
– latest date by which the amendment has to be
implemented at national level by publication of
an identical national standard or by endorsement (dop) 2009-11-01
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2012-02-01
__________
Endorsement notice
The text of amendment 1:2008 to the International Standard IEC 62320-1:2007 was approved by
CENELEC as an amendment to the European Standard without any modification.
__________
IEC 62320-1
Edition 1.0 2008-10
INTERNATIONAL
STANDARD
AMENDMENT 1
Maritime navigation and radiocommunication equipment and systems –
Automatic identification system (AIS) –
Part 1: AIS Base Stations – Minimum operational and performance requirements,
methods of testing and required test results

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
N
ICS 47.020.70 ISBN 2-8318-1015-3
– 2 – 62320-1 Amend. 1 © IEC:2008(E)
FOREWORD
This amendment has been prepared by IEC technical committee 80: Maritime navigation and
radiocommunication equipment and systems.
The text of this amendment is based on the following documents:
CDV Report on voting
80/522/CDV 80/543/RVC
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
NOTE The amendment clarifies some of the tests and adds an extra sentence to Annex A.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
____________
CONTENTS
Replace, in the list of CONTENTS, the existing Annex A title by the following new Annex A
title:
Annex A (normative) Additional AIS Base Station sentences

4.5 Base Station input/output sentence formatters
Replace the existing Table 1 by the following new Table 1:
Table 1 – Base Station input/output sentence formatters
Sentence Input Input Output Output
Description
formatter independent dependent independent dependent
Addressed and binary broadcast
ABK  X
acknowledgement
Addressed binary and safety
ABM X
related message
AIS regional channel assignment
ACA X Q
message
Preparation and initiation of an
AIS Base Station addressed
ACM X
channel message (VDL Message
22)
ACK X X  Acknowledge alarm
62320-1 Amend. 1 © IEC:2008(E) – 3 –
Sentence Input Input Output Output
Description
formatter independent dependent independent dependent
AIS Device Status (output interval
ADS  X X configured by BCE and upon
status change)
Preparation and initiation of an
AIS Base Station broadcast of a
AGA X  Q
group assignment message
(Message 23)
ALR  X X
Set alarm state
AIS interrogation request (VDL
AIR X
Message 15)
Preparation and initiation of an
ASN X  AIS Base Station broadcast of
assignment VDL Message 16
BBM X  Broadcast binary message
General Base Station
BCE X X Q Q
configuration extended
General Base Station
BCF X X Q Q
configuration
CAB X X Q Q Control AIS Base Station
Not supported by this IEC
CBM
standard
Data Link Management slot
allocations for Base Station (VDL
DLM X Q
Message 20 – FATDMA
reservations)
Configure broadcast rates for
ECB X Q Base Station messages with
epoch planning support
Frame summary of AIS reception,
defined by SPO. The manufacturer
FSR  X X
shall declare the parameters that
are supported
Installation of a station’s
SID X X
identification
Select AIS device’s reception
SPO X X Q Q
processing and output
Transmit feed-back report – Base
Station report on status of
TFR  X X
requested transmission. Automatic
status response of TSA+VDM
Transmit Slot Assignment – used
to identify AIS time slot used to
TSA X X
transmit the content of a VDM
sentence. TSA shall preceed the
VDM sentence
TSP X  Transmit Slot Prohibit
Transmit Slot Prohibit status
TSR  X
Report. Automatic status response
of TSP
VDM X X X X
VHF Data-link message
VHF Data-link Own-vessel
VDO  X X
message
Version information about
VER  Q Q equipment. Provided in response
to ABQ
VDL Signal Information, defined
VSI  X X
by SPO. The manufacturer shall
declare the parameters that are

– 4 – 62320-1 Amend. 1 © IEC:2008(E)
Sentence Input Input Output Output
Description
formatter independent dependent independent dependent
supported and the corresponding
accuracy. The VSI shall follow its
associated VDM/VDO
NOTE 1 “X” indicates input to, or output from, the AIS Base Station. “Q” indicates that the sentence may be
externally requested using the IEC 61162-1 “$xxABQ,xxx” query sentence (see Annex A) method(s) in order for
the identified sentence to be output.
NOTE 2 Sentence formatters shown in shaded rows are described in IEC 61162-1.

5.3 Minimum requirements for the TDMA transmitter of the AIS Base Station
Replace the existing Table 5 by the following new Table 5:
Table 5 – Minimum required TDMA transmitter characteristics
Transmitter parameters 25 kHz channels 12,5 kHz channels
Carrier power error
± 1,5 dB ± 1,5 dB
Carrier frequency error ± 500 Hz ± 500 Hz
Spectrum mask for slotted transmissions
–25 dBc at ± 10 kHz 0 dBc at ± 2,5 kHz
–70 dBc at ± 25 kHz –60 dBc at ± 12,5 kHz
Transmitter test sequence and modulation accuracy ‘0’ bit start for test signals 1 ‘0’ bit start for test
and 2 signals 1 and 2
1 760 Hz + 352 Hz/ –176 Hz 535 Hz + 108 Hz/ –54 Hz
for test signal 1 for test signal 1
2 400 Hz ± 240 Hz for test 1 200 Hz ± 120 Hz for
signal 2 test signal 2
Transmitter output power versus time Power within mask shown in Not applicable
Figure 11 and timings given
in Table 12
Intermodulation attenuation ≥ 40 dB Not applicable

6.2.1 General rules
Replace the eleventh bullet and text by the following:
• when the UTC sync source is unavailable, the AIS Base Station shall use UTC indirect or
shall be synchronised to another Base Station;

6.3.1 General rules
Replace the third bullet and text by the following:
• when the UTC sync source is unavailable, the independent AIS Base Station shall use
UTC indirect or the semaphore rules as defined by ITU-R M.1371;
Add, after the last bullet and text, the following:
• all VDL messages shall be as short as possible.

6.3.4.8 AIS Base Station response to VDM input
Add, after the second paragraph, the following new text:

62320-1 Amend. 1 © IEC:2008(E) – 5 –
A transmission initiated by a VDM input shall not replace a scheduled message.
Messages 4, 11 and 20 shall not be transmitted.
Messages 15 and 16 shall not be transmitted if a slot offset is provided unless the slot offset
is recalculated by the base station. Messages that have a Comm.state shall have the
Synch.state bits of the Comm.state set to the current status of the station. The remaining
Comm.state bits shall be set to zero to prevent false slot allocations.
The repeat indicator shall be set to greater than zero before transmitting.
After receiving a VDM sentence, the Base Station responds with the appropriate TFR
sentence.
6.3.5 Autonomous channel management
Add the following text as a new second paragraph:
The “in use” data field of the ACA sentence defines the status of the region (0 = not in use,
1 = in use). The manufacturer shall declare the number of regions supported.

6.4 BIIT conditions
Replace the existing text by the following text:
The AIS Base Station shall monitor the following BIIT conditions and shall generate the
appropriate ALR sentences on the PI. The ALR sentence shall be output at least once per
minute. The alarm conditions are noted in Table 9 and the resulting alarm status is sent via PI
sentence ADS. If an alarm is active (acknowledged or not), the ADS alarm status field is set
to A; if no alarm is active the field is set to V.

6.5.3 DGNSS dedicated port option
Replace the existing text by the following:
The AIS Base Station may be configured to transmit DGNSS corrections (Message 17) that
are input via a dedicated RTCM SC104 format DGNSS port.
Base Stations shall convert the RTCM SC104 format to VDL format before transmission.
This option shall only be available for the independent operation and care should be taken to
minimise the impact on the VDL.

8.1.4.1 Standard test signal number 1
Replace the existing text by the following text:
For TDMA Type 1: A test signal consisting of a 26 ms packet (1 slot) of 010101.

– 6 – 62320-1 Amend. 1 © IEC:2008(E)

8.1.4.2 Standard test signal number 2
Replace the existing text by the following text and delete the Note:
For TDMA Type 2: A test signal consisting of a 26 ms packet (1 slot) of 00001111.

Table 12 – Maximum values of absolute measurement uncertainties
Delete the final entry:
Transmitter transient frequency (frequency difference) ± 250 Hz

9.2.6.2 Method of measurement
Replace the existing item d) by the following new item d):
d) the transmitter shall be modulated with a continuous test signal number 1;

9.3.8.2 Manufacturers’ declarations
Replace the existing item c) by the following new item c):
c) frequency of the local oscillator at 162,025 MHz (AIS2) and at the lowest TDMA channel
(f , f ).
LOH LOL
9.3.8.6 Method of search over the "limited frequency range" using SINAD
measurement
Replace the existing item b) by the following new item b):
b) The wanted signal, provided by generator A, shall be at 162,025 MHz and shall be
modulated with a 1 kHz sine wave at ±2,4 kHz deviation.
Add, after item i), the following item j):
j) Repeat the test using the lowest frequency.

9.3.8.7 Method of search over the limited frequency range using PER or BER
measurement
Replace the existing item b) by the following new item b):
b) The wanted signal, provided by generator A, shall be at 162,025 MHz and shall be
modulated to generate test signal number 3.
Add, after item i), the foll
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.