EN 60947-1:2007/A2:2014
(Amendment)Low-voltage switchgear and controlgear - Part 1: General rules
Low-voltage switchgear and controlgear - Part 1: General rules
Niederspannungsschaltgeräte - Teil 1: Allgemeine Festlegungen
Appareillage à basse tension - Partie 1: Règles générales
Nizkonapetostne stikalne naprave - 1. del: Splošna pravila - Dopolnilo A2
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2015
Nizkonapetostne stikalne naprave - 1. del: Splošna pravila - Dopolnilo A2
Low-voltage switchgear and controlgear - Part 1: General rules
Niederspannungsschaltgeräte - Teil 1: Allgemeine Festlegungen
Appareillage à basse tension - Partie 1: Règles générales
Ta slovenski standard je istoveten z: EN 60947-1:2007/A2:2014
ICS:
29.130.20 Nizkonapetostne stikalne in Low voltage switchgear and
krmilne naprave controlgear
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 60947-1:2007/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2014
ICS 29.130.20
English Version
Low-voltage switchgear and controlgear -
Part 1: General rules
(IEC 60947-1:2007/A2:2014)
Appareillage à basse tension - Niederspannungsschaltgeräte -
Partie 1: Règles générales Teil 1: Allgemeine Festlegungen
(CEI 60947-1:2007/A2:2014) (IEC 60947-1:2007/A2:2014)
This amendment A2 modifies the European Standard EN 60947-1:2007; it was approved by CENELEC on 2014-10-14. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60947-1:2007/A2:2014 E
Foreword
The text of document 121A/15/FDIS, future IEC 60947-1:2007/A2, prepared by SC 121A "Low-voltage
switchgear and controlgear" of IEC/TC 121 " Switchgear and controlgear and their assemblies for low
voltage" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
(dop) 2015-07-14
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2017-10-14
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive.
For the relationship with EU Directive see informative Annex ZZ, which is an integral part of this
document.
This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment
Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC).
Endorsement notice
The text of the International Standard IEC 60947-1:2007/A2:2014 was approved by CENELEC as a
European Standard without any modification.
In the Bibliography of EN 60947-1:2007, the following notes have to be added for the standards indicated:
IEC 60695-11-5 NOTE Harmonized as EN 60695-11-5.
IEC 60947-3:2008 NOTE Harmonized as EN 60947-3:2009 (not modified).
IEC 60947-3:2008/A1:2012 NOTE Harmonized as EN 60947-3:2009/A1:2012 (not modified).
IEC 60947-4-1:2009 NOTE Harmonized as EN 60947-4-1:2010 (not modified).
IEC 60947-4-1:2009/A1:2012 NOTE Harmonized as EN 60947-4-1:2010/A1:2012 (not modified).
IEC 60947-4-2:2011 NOTE Harmonized as EN 60947-4-2:2012 (not modified).
1)
IEC 60947-4-3:1999 NOTE Harmonized as EN 60947-4-3:2000 (not modified).
1)
IEC 60947-4-3:1999/A1:2006 NOTE Harmonized as EN 60947-4-3:2000/A1:2006 (not modified).
1)
IEC 60947-4-3:1999/A2:2011 NOTE Harmonized as EN 60947-4-3:2000/A2:2011 (not modified).
IEC 60947-5-2:2007 NOTE Harmonized as EN 60947-5-2:2007 (not modified).
IEC 60947-5-2:2007/A1:2012 NOTE Harmonized as EN 60947-5-2:2007/A1:2012 (not modified).
IEC 60947-6-1:2005 NOTE Harmonized as EN 60947-6-1:2005 (not modified).
IEC 60947-6-1:2005/A1:2013 NOTE Harmonized as EN 60947-6-1:2005/A1:2014 (not modified).
1)
Superseded by EN 60947-4-3:2014 (IEC 60947-4-3:2014).
- 3 - EN 60947-1:2007/A2:2014
IEC 60947-6-2:2002 NOTE Harmonized as EN 60947-6-2:2003 (not modified).
IEC 60947-6-2:2002/A1:2007 NOTE Harmonized as EN 60947-6-2:2003/A1:2007 (not modified).
IEC 61095:2009 NOTE Harmonized as EN 61095:2009 (not modified).
IEC 61439 Series NOTE Harmonized as EN 61439 Series (not modified).
IEC 61508-6 NOTE Harmonized as EN 61508-6.
CISPR 22 NOTE Harmonized as EN 55022.
ISO 50001 NOTE Harmonized as EN ISO 50001.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
Annex ZA of EN 60947-1:2007 applies, except as follows:
Publication Year Title EN/HD Year
Delete from the Annex ZA of EN 60947-1:2007 "IEC 60439-1:1999 and its
amendment A1:2004".
Replace the existing references of the following list by the following new references:
IEC 60664-1 2007 Insulation coordination for equipment EN 60664-1 2007
within low-voltage systems -
Part 1: Principles, requirements and tests
IEC 61000-3-3 2013 Electromagnetic compatibility (EMC) - EN 61000-3-3 2013
Part 3-3: Limits - Limitation of voltage
changes, voltage fluctuations and flicker in
public low-voltage supply systems, for
equipment with rated current ≤ 16 A per
phase and not subject to conditional
connection
IEC 61000-4-2 2008 Electromagnetic compatibility (EMC) - EN 61000-4-2 2009
Part 4-2: Testing and measurement
techniques - Electrostatic discharge
immunity test
IEC 61000-4-4 2012 Electromagnetic compatibility (EMC) - EN 61000-4-4 2012
Part 4-4: Testing and measurement
techniques - Electrical fast transient/burst
immunity test
IEC 61000-4-6 2013 Electromagnetic compatibility (EMC) - EN 61000-4-6 2014
Part 4-6: Testing and measurement
techniques - Immunity to conducted
disturbances, induced by radio-frequency
fields
IEC 61000-4-8 2009 Electromagnetic compatibility (EMC) - EN 61000-4-8 2010
Part 4-8: Testing and measurement
techniques - Power frequency magnetic
field immunity test
CISPR 11 (mod) 2009 Industrial, scientific and medical EN 55011 2009
equipment - Radio-frequency disturbance
+A1 2010 +A1 2010
characteristics - Limits and methods of
measurement
- 5 - EN 60947-1:2007/A2:2014
Add, to the existing references the new amendments as follows:
IEC 60947-5-1 2003 Low-voltage switchgear and controlgear - EN 60947-5-1 2004
Part 5-1: Control circuit devices and + corr. November 2004
switching elements - Electromechanical + corr. July 2005
control circuit devices
+A1 2009 +A1 2009
IEC 61000-3-2 2005 Electromagnetic compatibility (EMC) - EN 61000-3-2 2006
Part 3-2: Limits - Limits for harmonic
+A1 2008 +A1 2009
current emissions (equipment input current
+A2 2009 +A2 2009
≤ 16 A per phase)
IEC 61000-4-3 2006 Electromagnetic compatibility (EMC) - EN 61000-4-3 2006
Part 4-3: Testing and measurement
+A1 2007 +A1 2008
techniques - Radiated, radio-frequency,
+A2 2010 +A2 2010
electromagnetic field immunity test
IEC 61000-4-13 2002 Electromagnetic compatibility (EMC) - EN 61000-4-13 2002
Part 4-13: Testing and measurement
+A1 2009 +A1 2009
techniques - Harmonics and
interharmonics including mains signalling
at a.c. power port, low frequency immunity
tests
Add the following new references as follows:
IEC 60092-504 2001 Electrical installations in ships - - -
Part 504: Special features - Control and
instrumentation
IEC 60300-3-5 2001 Dependability management - - -
Part 3-5: Application guide - Reliability test
conditions and statistical test principles
IEC 61508 Series Functional safety of EN 61508 Series
electrical/electronic/programmable
electronic safety-related systems
IEC 61649 2008 Weibull analysis EN 61649 2008
IEC 62061 2005 Safety of machinery - Functional safety of EN 62061 2005
safety-related electrical, electronic and + corr. February 2010
programmable electronic control systems
IEC 62430 2009 Environmentally conscious design for EN 62430 2009
electrical and electronic products
IEC 62474 2012 Material declaration for products of and for EN 62474 2012
the electrotechnical industry
ISO 13849-1 2006 Safety of machinery - Safety-related parts EN ISO 13849-1 2008
of control systems -
Part 1: General principles for design
Replace Annex ZZ by the following new one:
Annex ZZ
(informative)
Coverage of Essential Requirements of EU Directives
This European Standard has been prepared under a mandate given to CENELEC by the
European Commission and the European Free Trade Association and within its scope the
standard covers protection requirements of Annex I Article 1 of the EU Directive 2004/108/EC.
Compliance with this standard provides presumption of conformity with the specified essential
requirements of the Directives concerned.
NOTE: Other requirements and other EU Directives may be applicable to the products falling
within the scope of this standard.
IEC 60947-1 ®
Edition 5.0 2014-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
A MENDMENT 2
AM ENDEMENT 2
Low-voltage switchgear and controlgear –
Part 1: General rules
Appareillage à basse tension –
Partie 1: Règles générales
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX XA
ICS 29.130.20 ISBN 978-2-8322-1798-6
– 2 – IEC 60947-1:2007/AMD2:2014
© IEC 2014
FOREWORD
This amendment has been prepared by subcommittee 17B: Low-voltage switchgear and
controlgear, of IEC technical committee 17: Switchgear and controlgear.
The text of this amendment is based on the following documents:
FDIS Report on voting
121A/15/FDIS 121A/21/RVD
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC web site under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.
_____________
1.1 Scope and object
Replace the existing text of this subclause by the following new text:
This standard applies, when required by the relevant product standard, to low-voltage
switchgear and controlgear hereinafter referred to as "equipment" or "device" and intended to
be connected to circuits the rated voltage of which does not exceed 1 000 V a.c. or
1 500 V d.c.
This standard states the general rules and common safety requirements for low-voltage
switchgear and controlgear, including:
– definitions;
– characteristics;
– information supplied with the equipment;
– normal service, mounting and transport conditions;
– constructional and performance requirements;
– verification of characteristics and performance;
– environmental aspects.
IEC 60947-1:2007/AMD2:2014 – 3 –
© IEC 2014
This standard does not apply to low-voltage switchgear and controlgear assemblies which are
dealt with in IEC 61439 series, as applicable.
1.2 Normative references
Delete the existing reference to "IEC 60439-1:1999" and its Amendment 1.
Replace the existing references by the following new references:
IEC 60664-1:2007, Insulation coordination for equipment within low-voltage systems – Part 1:
Principles, requirements and tests
IEC 61000-3-3:2013, Electromagnetic compatibility (EMC) – Part 3-3: Limits – Limitation of
voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for
equipment with rated current ≤16 A per phase and not subject to conditional connection
IEC 61000-4-2:2008, Electromagnetic compatibility (EMC) – Part 4-2: Testing and
measurement techniques – Electrostatic discharge immunity test
IEC 61000-4-4:2012, Electromagnetic compatibility (EMC) – Part 4-4: Testing and
measurement techniques
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.