iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 60630:1998/A3:1999

(Amendment)

Maximum lamp outlines for incandescent lamps

Maximum lamp outlines for incandescent lamps

EN following parallel vote

Maximale Lampen-Hüllkurven für Glühlampen

Encombrement maximal des lampes à incandescence

Maximum lamp outlines for incandescent lamps

General Information

Status
Published
Publication Date
03-Aug-1999
Withdrawal Date
31-Jul-2002
ICS
29.140.20 - Incandescent lamps
Technical Committee
CLC/TC 34 - 'Lamps and related equipment
Drafting Committee
IEC/SC 34A - IEC_SC_34A
Parallel Committee
IEC/SC 34A - IEC_SC_34A
Current Stage
6060 - Document made available - Publishing
Start Date
04-Aug-1999
Completion Date
04-Aug-1999
Ref Project
SIST EN 60630:2001/A3:2001 - Maximum lamp outlines for incandescent lamps

Relations

Amends
EN 60630:1998 - Maximum lamp outlines for incandescent lamps
Effective Date
28-Jan-2023

Buy Standard

EN 60630:2001/A3:2001EN 60630:2001/A3:2001
PreviousNext
Amendment
EN 60630:2001/A3:2001
English and French language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-marec-2001
Maximum lamp outlines for incandescent lamps
Maximum lamp outlines for incandescent lamps
Maximale Lampen-Hüllkurven für Glühlampen
Encombrement maximal des lampes à incandescence
Ta slovenski standard je istoveten z: EN 60630:1998/A3:1999
ICS:
29.140.20 Žarnice z žarilno nitko Incandescent lamps
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

NORME CEI
INTERNATIONALE
IEC
INTERNATIONAL
STANDARD
AMENDEMENT 3
AMENDMENT 3
1999-07
Amendement 3
Encombrement maximal des lampes
à incandescence
Amendment 3
Maximum lamp outlines for
incandescent lamps
Les feuilles de cet amendement sont à insérer
dans la Publication 60630 (1994)
The sheets contained in this amendment are to be
inserted in Publication 60630 (1994)
 IEC 1999 Droits de reproduction réservés  Copyright - all rights reserved
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http: //www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
C
PRICE CODE
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue

INSTRUCTIONS POUR L'INSERTION DES INSTRUCTIONS FOR THE INSERTION
NOUVELLES PAGES ET FEUILLES DE OF NEW PAGES AND SHEETS
NORMES DANS LA PUBLICATION 60630 IN PUBLICATION 60630
1. Retirer les pages existantes 11, 12, 13, 14 et 1. Remove the existing pages 11, 12, 13, 14
insérer les nouvelles pages 11, 12, 13 et 14. and insert in their place new pages 11, 12,
13 and 14.
2. Retirer les feuilles existantes 2. Remove existing sheets
60630-IEC-1510-1, 60630-IEC-1540-2 60630-IEC-1510-1, 60630-IEC-1540-2
et les remplacer par les nouvelles feuilles and insert in their place new sheets
60630-IEC-1510-2 60630-IEC-1510-2
60630-IEC-1540-3 60630-IEC-1540-3
AVANT-PROPOS
Le présent amendement a été établi par le sous-comité 34A: Lampes, du comité d'études 34
de la CEI: Lampes et équipements associés.
Le texte de cet amendement est issu des documents suivants:
FDIS Rapport de vote
34A/861/FDIS 34A/875/RVD
Le rapport de vote indiqué dans le tableau ci-dessus donne toute information sur le vote ayant
abouti à l'approbation de cet amendement.
___________
FOREWORD
This amendment has been prepared by subcommittee 34A: Lamps, of IEC technical committee 34:
Lamps and related equipment.
The text of this amendment is based on the following documents:
FDIS Report on voting
34A/861/FDIS 34A/875/RVD
Full information on the voting for the approval of this amendment can be found in the report on
voting indicated in the above table.
___________
NORME
CEI
INTERNATIONALE
IEC
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
1994-08
Modifiée selon les amendements 1 (1997), 2 (1998) et 3 (1999)
Amended in accordance with Amendments 1 (1997), 2 (1998) and 3 (1999)
Encombrement maximal des lampes
à incandescence
Maximum lamp outlines for
incandescent lamps
Commission Electrotechnique Internationale
International Electrotechnical Commission

60630 Amend. 2  IEC:1998 – 11 –
SECTION 2 – LAMP OUTLINE DATA SHEETS
2.1 Introduction
The numbering system for data sheets is made up of four parts as follows:
– the first number represents the number of this standard (IEC 60630);
– the second part is the letter grouping "IEC";
– the third part is the basic data sheet number from the series in the following table;
– the fourth part is a number indicating the edition of the sheet.
NOTE – When amendments are made to data sheets, the affected pages are issued with an updated edition number.
For example, data sheet 60630-IEC-1010-1 has been amended and its new issue number is 60630-IEC-1010-2.
The sequence of the data sheets is by "wattage" within the following subdivisions:
Category Data sheet numbers
Lamps with caps B15, B22, E14, E27 and E39/E40* 1000 - 1499
Reflector lamps with caps B22, E14 and E27 1500 - 1999
Lamps with caps E26/24** 2000 - 2499
2500 - 2999
Reflector lamps with caps E26/24** and E26/53×39
Lamps with caps E26/25** 3000 - 3499
Reflector lamps with caps E17 and E26/25** 3500 - 3999
Tungsten halogen lamps 4000 - 4499
* The combined sheets for E39 and E40 capped lamps will be split up (under consideration).
** There are two variations of E26 caps which are not fully compatible. In this standard, separate references are
made to E26/24 caps used in North America and E26/25 caps used in Japan.

– 12 – 60630 amend. 3  CEI:1999
2.2 Liste de types particuliers de lampes inclus dans la présente norme
Feuille n° Description Puissance(s) typique(s) Culot
60630-IEC-1010 Forme poire/A60-PS60 25 W, 40 W, 60 W, 100 W B22d/25x26
60630-IEC-1020 Forme poire/A60-PS60 25 W, 40 W, 60 W, 100 W E27/27
60630-IEC-1030 Forme poire/A80-PS80 150 W B22d/25x26
60630-IEC-1040 Forme poire/A80-PS80 150 W, 200 W E27/27
60630-IEC-1050 Forme poire/A90-PS90 300 W E27/27
60630-IEC-1060 Forme poire/A90-PS90 300 W E39/41, E40/41
60630-IEC-1070 Forme poire/A110-PS110 300 W, 500 W E39/41, E40/45
60630-IEC-1080 Forme poire/A130-PS130 1 000 W E39/41, E40/45
60630-IEC-1090 Forme poire/A150-PS150 1 000 W E39/41, E40/45
60630-IEC-1100 Forme poire/A170-PS170 1 500 W E39/41, E40/45
60630-IEC-1110 Forme champignon/M60 40 W, 60 W, 100 W B22d/25x26
60630-IEC-1115 Forme champignon/M50 40 W, 60 W B22d/25x26
60630-IEC-1120 Forme champignon/M60 40 W, 60 W, 100 W E27/27
60630-IEC-1125 Forme champignon/M50 40 W, 60 W E27/27
60630-IEC-1130 Forme champignon/M75 150 W B22d/25x26
60630-IEC-1140 Forme champignon/M75 150 W E27/27
60630-IEC-1150 Forme sphérique/P45 – B22d/22, B22d/25x26
60630-IEC-1160 Forme sphérique/P45 – E27/27
60630-IEC-1170 Forme sphérique/P45 – B15d/24x17
60630-IEC-1180 Forme sphérique/P45 – E14/25x17
60630-IEC-1190 Forme flamme/B35 – B22d/22, B22d/25x26
60630-IEC-1200 Forme flamme/B35 – E27/27
60630-IEC-1210 Forme flamme/B35 – B15d/24x17
60630-IEC-1220 Forme flamme/B35 – E14/25x17
60630-IEC-1250 Lampe poirette/S26 15 W, 25 W E14/25x17
60630-IEC-1260 Lampe poirette/S28 10 W, 15 W, 25 W E14/25x17
60630-IEC-1270 Lampe poirette/S28 10 W, 15 W, 25 W B15d/24x17, B15d/27x22
60630-IEC-1280 Lampe poirette/S28 10 W, 15 W, 25 W B22d/22
60630-IEC-1310 Lampe tubulaire/T17 10 W, 15 W, 25 W E14/20
60630-IEC-1320 Lampe tubulaire/T17 10 W, 15 W, 25 W B15d/19
60630-IEC-1330 Lampe tubulaire/T20 15 W, 25 W E14/23x15
60630-IEC-1340 Lampe tubulaire/T22 15 W, 20 W, 25 W E14/25x17
60630-IEC-1350 Lampe tubulaire/T22 15 W, 20 W, 25 W B15d/19
60630-IEC-1360 Lampe tubulaire/T25 15 W, 25 W E14/25x17
60630-IEC-1370 Lampe tubulaire/T25 15 W, 25 W B22d/22
60630-IEC-1380 Lampe tubulaire/T25 15 W, 25 W, 40 W E14/25x17
60630-IEC-1390 Lampe tubulaire/T25 15 W, 25 W, 40 W B15d/24x17
60630-IEC-1400 Lampe tubulaire/T25 15 W, 25 W, 40 W B22
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 60809:2021/A1:2023(Amendment)
Lamps and light sources for road vehicles - Dimensional, electrical and luminous requirements
SIST EN IEC 60809:2021/A1:2024
  • Amendment
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60809:2021(Main)
Lamps and light sources for road vehicles - Dimensional, electrical and luminous requirements
SIST EN IEC 60809:2021

This document is applicable to electric light sources (see Note 1) for use in automotive applications, for example in road illumination devices and/or light signalling devices for road vehicles. It is especially applicable to light sources listed in UN Resolution R.E.5 and light sources subject to other legislations. This document specifies the technical requirements for interchangeability for example dimensional, electrical and photometrical characteristics, and includes test methods. For the light sources listed in this document, the data sheets are contained either in this document or are included by reference to UN Resolution R.E.5. Performance requirements are specified in IEC 60810, for example life, torsion strength, resistance to vibration and shock. The requirements for miniature light sources for supplementary purposes, not subject to legislation, are specified in IEC 60983. NOTE 1 The terms "lamp" and "light source" are both used in this document to mean the same product, so the two terms are interchangeable throughout this document. NOTE 2 In various vocabularies and standards, different terms are used for "incandescent lamp" (IEC 60050845:1987, 845-07-04), "discharge lamp" (IEC 60050-845:1987, 845-07-17) and "LED lamp". In this document "filament lamp", "discharge lamp" and "LED light source" are used, however, where only "lamp" or "light source" is written, all light sources, independent of the technology used, are meant, unless the context clearly shows that it applies to one kind of technology only. In the UN Regulations, the word "light source" is used for the products specified in this document. NOTE 3 Wherever the term "device" is used, it is meant to designate equipment which is used as a luminaire. It can for instance take the form and purpose of a headlight or signal light.

  • Standard
    97 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62504:2014/A1:2018(Amendment)
General lighting - Light emitting diode (LED) products and related equipment - Terms and definitions
SIST EN 62504:2014/A1:2018

Second CDV circulated to follow IEC

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60357:2003/A11:2016(Amendment)
Tungsten halogen lamps (non-vehicle) - Performance specifications
SIST EN 60357:2004/A11:2016

This International Standard specifies the performance requirements for single-capped and double-capped tungsten halogen lamps, having rated voltages of up to 250 V, used for the following applications: · Projection (including cinematograph and still projection) · · Photographic (including studio) · · Floodlighting · · Special purpose · · General purpose · · Stage lighting This third edition cancels and replaces the second edition published in 1982 and amendments 1(1984), 2(1985), 3(1987), 4(1989), 5(1992), 6(1993), 7(1994), 8(1995), 9(1996), 10(1996), 11(1997), 12(1999) and 13(2000

  • Amendment
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60630:1998/A7:2015(Amendment)
Maximum lamp outlines for incandescent lamps
SIST EN 60630:2001/A7:2015
  • Amendment
    13 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60432-3:2013(Main)
Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle)
SIST EN 60432-3:2013

IEC 60432-3:2012 specifies the safety requirements for single-capped and double-capped tungsten halogen lamps, having rated voltages of up to 250 V, used for the following applications: - projection (including cinematograph and still projection), - photographic (including studio), - floodlighting, - special purpose, - general purpose, - stage lighting. This second edition of IEC 60432-3 cancels and replaces the first edition published in 2002, Amendment 1 (2005) and Amendment 2 (2008). The main changes with respect to the previous edition are as follows: - adapting the cold fill pressure requirements and tests for self-shielded lamps to the state of the technology, - introduction of requirements to fully cover photobiological safety according to IEC 62471.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61549:2003/A3:2012(Amendment)
Miscellaneous lamps
SIST EN 61549:2004/A3:2013

This International Standard specifies lamps, or information relevant to lamps, not given elsewhere in existing IEC lamp standards. It covers both safety and performance aspects.

  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60432-2:2000/A2:2012(Amendment)
Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes
SIST EN 60432-2:2000/A2:2012

This part of IEC 60432 specifies the safety and the related interchangeability requirements of tungsten halogen lamps for general lighting service. It covers those tungsten halogen lamps that are used as direct replacements for conventional tungsten filament lamps as well as new tungsten halogen lamps which have no correspondence in IEC 60432-1, but for which the safety and interchangeability requirements are treated by this standard in conjunction with IEC 60432-1. These tungsten halogen lamps have the following characteristics:
– rated wattage up to and including 250 W;
– rated voltage of 50 V to 250 V inclusive;
– caps B15d, B22d, E12, E14, E17, E26, E26d, E26/5039, E27 or E27/5139.
This standard also covers single-ended lamps, within the above ratings, which are not direct
replacements for conventional tungsten filament lamps, but serve the same purpose.
NOTE 1 There is no implication that a tungsten halogen lamp used as a substitute for an incandescent tungsten filament lamp would use the same bulb shape as the original incandescent lamp. NOTE 2 There are two variations of E26 caps which are not fully compatible. E26/24 caps are used in North merica and E26/25 caps are used in Japan.

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60432-1:2000/A2:2012(Amendment)
Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes
SIST EN 60432-1:2000/A2:2012

International Standard IEC 60432-1 specifies the safety and interchangeability requirements of
tungsten filament incandescent lamps for general lighting service having:
– rated wattage up to and including 200 W;
– rated voltage of 50 V to 250 V inclusive;
– bulbs of the A, B, C, G, M, P, PS, PAR or R shapes* , or other bulb shapes where the lamps
are intended to serve the same purpose as lamps with the foregoing bulb shapes;
– bulbs with all kinds of finishes;
– caps B15d, B22d, E12, E14, E17, E26** , E26d, E26/5039, E27 or E27/5139.
As far as is reasonably practicable, this standard is also applicable to lamps with bulbs and caps other than those mentioned above, but which serve the same purpose. This standard specifies the method a manufacturer should use to show that his product conforms to this standard on the basis of whole production appraisal in association with his test records on finished products. This method can also be applied for certification purposes. Details of a batch test procedure which can be used to make limited assessment of batches are also given. This standard is concerned with safety criteria only and does not take into account the performance of tungsten filament lamps with respect to luminous flux, life or power consumption characteristics. Readers should refer to IEC 60064 for such characteristics with respect to types normally used for general lighting service.

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61341:2011(Main)
Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
SIST EN 61341:2011

IEC/TR 61341:2010 describes the method of measuring and specifying the centre beam intensity and the associated beam angle(s) of reflector lamps. It applies to: - incandescent, - tungsten halogen, - gas-discharge and LED based reflector lamps for general lighting purposes. It does not apply to lamps for special purposes such as projection lamps. This second edition cancels and replaces the first edition published in 1994 and constitutes a technical revision. Due to the increasing use of reflector equipped LED lamps, the scope has been broadened and measurement conditions been included in order to take account of these lamps. Further, for easier understanding of the relation between the different axis and different intensities, two figures have been added. The luminous intensity distribution shall be reported instead of the centre beam intensity, if the latter is very low ("butterfly" distributions).

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day