EN 61326-2-4:2006

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9

specifies more detailed test configurations, operational conditions and performance criteria than IEC 61326-1 for equipment for - insulation monitoring according to IEC 61557-8 -insulation fault location according to IEC 61557-9; This applies to insulation monitoring devices and insulation fault location systems permanently or semi-permanently connected to the distribution system.

Elektrische Mess-, Steuer-, Regel- und Laborgeräte - EMV-Anforderungen - Teil 2-4: Besondere Anforderungen - Prüfanordnung, Betriebsbedingungen und Leistungsmerkmale für Isolationsüberwachungsgeräte gemäß IEC 61557-8 und Geräte zur Isolationsfehlerortung gemäß IEC 61557-9

Matériel electrique de mesure, de commande et de laboratoire - Exigences relatives à la CEM - Partie 2-4: Exigences particulières - Configurations d'essai, conditions de fonctionnement et critères d'aptitude à la fonction pour les dispositifs de surveillance d'isolation en accord avec la CEI 61557-8 et pour les équipements de localisation de défaut d'isolation en accord avec la CEI 61557-9

spécifie plus en détail que la CEI 61326-1, les configurations d'essai, les conditions de fonctionnement et les critères d'aptitude à la fonction pour les équipements pour - la surveillance de l'isolation en accord avec la CEI 61557-8; -la localisation des fautes d'isolation en accord avec la CEI 61557-9. Elle s'applique aux dispositifs de surveillance de l'isolation et aux systèmes de localisation de fautes d'isolation permanents ou semi-permanents connectés au système de distribution

Električna oprema za merjenje, nadzor in laboratorijsko uporabo - Zahteve za elektromagnetno združljivost – 2-4. del: Posebne zahteve - Konfiguracije za preskus, pogoji obratovanja in kriteriji za lastnosti naprav za stalno preverjanje izolacije po IEC 61557-8 in opreme za ugotavljanje mesta okvare izolacije po IEC 61557-9 (IEC 61326-2-4:2006)

Člen 1 iz IEC 61326-1 se takole nanaša na sprejetje: Dodatek: Ta del IEC 61326 podrobneje označuje preskusne konfiguracije, pogoje delovanja in kriterije delovanja kot IEC 61326-1, za opremo za preverjanje izolacije glede na IEC 61557-8; - lokacija izolacijske napake glede na IEC 61557-9. To se nanaša na naprave za stalno preverjanje izolacije in sistem lokacij izolacijskih napak, ki so stalno ali delno vezane na distribucijski sistem.

General Information

• Status: Withdrawn
• Publication Date: 05-Dec-2006
• Withdrawal Date: 31-Oct-2009
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 33.100 - Electromagnetic compatibility (EMC)
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65A - IEC_SC_65A
• Parallel Committee: IEC/SC 65A - IEC_SC_65A
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 14-Aug-2015
• Completion Date: 14-Aug-2015
• Directive: 2004/108/EC - Directive 2004/108/EC of the European Parliament and of the Council of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
• Directive: 2004/108/EU - DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
• Directive: 89/336/EEC - Electromagnetic compatibility (EMC)
• Mandate: M/404 - Standardisation Mandate to CEN, CENELEC and ETSI for harmonized standard according to the Electro Magnetic Compatibility (EMC) Directive 2004/108/EC
• Ref Project: SIST EN 61326-2-4:2007 - Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9

Relations

• Replaces: EN 61326:1997/A2:2001 - Electrical equipment for measurement, control and laboratory use - EMC requirements
• Effective Date: 28-Jan-2023
• Replaces: EN 61326:1997 - Electrical equipment for measurement, control and laboratory use - EMC requirements
• Effective Date: 28-Jan-2023
• Replaces: EN 61326:1997/A3:2003 - Electrical equipment for measurement, control and laboratory use - EMC requirements
• Effective Date: 28-Jan-2023
• Replaces: EN 61326:1997/A1:1998 - Electrical equipment for measurement, control and laboratory use - EMC requirements
• Effective Date: 28-Jan-2023
• Replaced By: EN 61326-2-4:2013 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61326-2-4:2007
01-september-2007
1DGRPHãþD
SIST EN 61326:1998
SIST EN 61326:1998/A1:1998
SIST EN 61326:1998/A2:2002
SIST EN 61326:1998/A3:2004
(OHNWULþQDRSUHPD]DPHUMHQMHQDG]RULQODERUDWRULMVNRXSRUDER=DKWHYH]D
HOHNWURPDJQHWQR]GUXåOMLYRVW±GHO3RVHEQH]DKWHYH.RQILJXUDFLMH]D
SUHVNXVSRJRMLREUDWRYDQMDLQNULWHULML]DODVWQRVWLQDSUDY]DVWDOQRSUHYHUMDQMH
L]RODFLMHSR,(&LQRSUHPH]DXJRWDYOMDQMHPHVWDRNYDUHL]RODFLMHSR,(&
,(&
Electrical equipment for measurement, control and laboratory use - EMC requirements --
Part 2-4: Particular requirements - Test configurations, operational conditions and
performance criteria for insulation monitoring devices according to IEC 61557-8 and for
equipment for insulation fault location according to IEC 61557-9
Ta slovenski standard je istoveten z: EN 61326-2-4:2006
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
SIST EN 61326-2-4:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61326-2-4:2007

---------------------- Page: 2 ----------------------

SIST EN 61326-2-4:2007


EUROPEAN STANDARD
EN 61326-2-4

NORME EUROPÉENNE
December 2006
EUROPÄISCHE NORM

ICS 25.040.40; 33.100 Supersedes EN 61326:1997 + A1:1998 + A2:2001 + A3:2003

English version

Electrical equipment for measurement, control and laboratory use -
EMC requirements
Part 2-4: Particular requirements
Test configurations, operational conditions and performance criteria
for insulation monitoring devices according to IEC 61557-8
and for equipment for insulation fault location according to IEC 61557-9
(IEC 61326-2-4:2006)

Matériel electrique de mesure,  Elektrische Mess-, Steuer-, Regel-
de commande et de laboratoire - und Laborgeräte -
Exigences relatives à la CEM EMV-Anforderungen
Partie 2-4: Exigences particulières - Teil 2-4: Besondere Anforderungen -
Configurations d'essai, conditions Prüfanordnung, Betriebsbedingungen
de fonctionnement et critères d'aptitude und Leistungsmerkmale
à la fonction pour les dispositifs für Isolationsüberwachungsgeräte gemäß
de surveillance d'isolation en accord IEC 61557-8 und Geräte
avec la CEI 61557-8 zur Isolationsfehlerortung gemäß
et pour les équipements de localisation IEC 61557-9
de défaut d'isolation en accord (IEC 61326-2-4:2006)
avec la CEI 61557-9
(CEI 61326-2-4:2006)

This European Standard was approved by CENELEC on 2006-11-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61326-2-4:2006 E

---------------------- Page: 3 ----------------------

SIST EN 61326-2-4:2007
EN 61326-2-4:2006 - 2 -

Foreword
The text of document 65A/473/FDIS, future edition 1 of IEC 61326-2-4, prepared by SC 65A, System
aspects, of IEC TC 65, Industrial-process measurement and control, was submitted to the IEC-CENELEC
parallel vote and was approved by CENELEC as EN 61326-2-4 on 2006-11-01.
The EN 61326 series supersedes EN 61326:1997 + corrigendum September 1998 + A1:1998 + A2:2001
+ A3:2003.
This part of EN 61326 is to be used in conjunction with EN 61326-1:2006 and follows the same
numbering of clauses, subclauses, tables and figures as that standard.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsem
...