EN IEC 61326-2-2:2021

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable testing, measuring and monitoring equipment used in low-voltage distribution systems

IEC 61326-2-2:2020 is available as IEC 61326-2-2:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61326-2-2:2020 specifies more detailed test configurations, operational conditions and performance criteria for equipment covered by Annex A of IEC 61326-1:2020 which is: - used for testing, measuring or monitoring of protective measures in low-voltage distribution systems, and; - powered by battery and/or from the circuit measured, and - portable. Examples of such EUTs include, but are not limited to, voltage detectors, insulation testers, earth continuity testers, earth resistance testers, leakage current clamps, loop impedance testers, “residual-current-device-testers” (RCD-testers) and phase sequence testers as defined in IEC 61557 (all parts).

Elektrische Mess-, Steuer-, Regel- und Laborgeräte - EMV-Anforderungen - Teil 2-2: Besondere Anforderungen - Prüfanordnung, Betriebsbedingungen und Leistungsmerkmale für ortsveränderliche Prüf-, Mess- und Überwachungsgeräte für den Gebrauch in Niederspannungs-Stromversorgungsnetzen

Matériel électrique de mesure, de commande et de laboratoire - Exigences relatives à la CEM - Partie 2-2: Exigences particulières - Configurations d’essai, conditions de fonctionnement et critères de performance des matériels portables d’essai, de mesure et de surveillance utilisés dans des réseaux de distribution à basse tension

IEC 61326-2-2:2020 est disponible sous forme de IEC 61326-2-2:2020 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L’IEC 61326:2020 donne des spécifications plus détaillées des configurations d’essai, des conditions fonctionnelles et des critères de performance pour les matériels couverts par l'Annexe A de l’IEC 61326-1:2020, qui sont: - utilisés pour le contrôle, la mesure ou la surveillance de mesures de protection dans les réseaux de distribution à basse tension, et; - alimentés par batterie et/ou par le circuit mesuré, et - portables. Exemples de tels EST (entre autres): détecteurs de tension, appareils d’essai d’isolement, appareils d’essai de continuité de terre, appareils d’essai de résistance à la terre, pinces de courant de fuite, appareils d’essai d’impédance de boucle, “appareils d’essai de dispositifs à courant résiduel” (appareils d’essai DCR) et appareils d’essai d'ordre de phases, tels que définis dans l’IEC 61557 (toutes les parties).

Električna oprema za merjenje, nadzor in laboratorijsko uporabo - Zahteve za elektromagnetno združljivost (EMC) - 2-2. del: Posebne zahteve - Preskusne konfiguracije, obratovalni pogoji in merila učinkovitosti za prenosno preskusno merilno opremo in opremo za nadzorovanje, ki se uporablja v nizkonapetostnih distribucijskih sistemih (IEC 61326-2-2:2020)

General Information

• Status: Published
• Publication Date: 03-Jun-2021
• ICS: 17.220 - Electricity. Magnetism. Electrical and magnetic measurements
• ICS: 17.220.20 - Measurement of electrical and magnetic quantities
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 33.100 - Electromagnetic compatibility (EMC)
• ICS: 33.100.20 - Immunity
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65A - IEC_SC_65A
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 04-Jun-2021
• Completion Date: 04-Jun-2021
• Directive: 2014/30/EU - Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast)
• Mandate: M/552 - [C(2016) 7641 final] Standardisation request as regards harmonised standards in support of Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility
• Ref Project: SIST EN IEC 61326-2-2:2021 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems (IEC 61326-2-2:2020)

Relations

• Replaces: EN 61326-2-2:2013 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems
• Effective Date: 25-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 61326-2-2:2021
01-oktober-2021
Nadomešča:
SIST EN 61326-2-2:2013
Električna oprema za merjenje, nadzor in laboratorijsko uporabo - Zahteve za
elektromagnetno združljivost (EMC) - 2-2. del: Posebne zahteve - Preskusne
konfiguracije, obratovalni pogoji in merila učinkovitosti za prenosno preskusno
merilno opremo in opremo za nadzorovanje, ki se uporablja v nizkonapetostnih
distribucijskih sistemih (IEC 61326-2-2:2020)
Electrical equipment for measurement, control and laboratory use - EMC requirements -
Part 2-2: Particular requirements - Test configurations, operational conditions and
performance criteria for portable test, measuring and monitoring equipment used in low-
voltage distribution systems (IEC 61326-2-2:2020)
Elektrische Mess-, Steuer-, Regel- und Laborgeräte – EMV-Anforderungen – Teil 2-2:
Besondere Anforderungen – Prüfanordnung, Betriebsbedingungen und
Leistungsmerkmale für ortsveränderliche Prüf-, Mess- und Überwachungsgeräte für den
Gebrauch in Niederspannungs-Stromversorgungsnetzen (IEC 61326-2-2:2020)
Matériel électrique de mesure, de commande et de laboratoire - Exigences relatives à la
CEM - Partie 2-2: Exigences particulières - Configurations d'essai, conditions de
fonctionnement et critères de performance des matériels portatifs d'essai, de mesure et
de surveillance utilisés dans des systèmes de distribution basse tension (IEC 61326-2-
2:2020)
Ta slovenski standard je istoveten z: EN IEC 61326-2-2:2021
ICS:
19.080 Električno in elektronsko Electrical and electronic
preskušanje testing
SIST EN IEC 61326-2-2:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 61326-2-2:2021

---------------------- Page: 2 ----------------------
SIST EN IEC 61326-2-2:2021


EUROPEAN STANDARD EN IEC 61326-2-2

NORME EUROPÉENNE

EUROPÄISCHE NORM
June 2021
ICS 17.220.20; 33.100.20; 25.040.40 Supersedes EN 61326-2-2:2013 and all of its
amendments and corrigenda (if any)
English Version
Electrical equipment for measurement, control and laboratory
use - EMC requirements - Part 2-2: Particular requirements -
Test configurations, operational conditions and performance
criteria for portable testing, measuring and monitoring equipment
used in low-voltage distribution systems
(IEC 61326-2-2:2020)
Matériel électrique de mesure, de commande et de Elektrische Mess-, Steuer-, Regel- und Laborgeräte - EMV-
laboratoire - Exigences relatives à la CEM - Partie 2-2: Anforderungen - Teil 2-2: Besondere Anforderungen -
Exigences particulières - Configurations d'essai, conditions Prüfanordnung, Betriebsbedingungen und
de fonctionnement et critères de performance des matériels Leistungsmerkmale für ortsveränderliche Prüf-, Mess- und
portables d'essai, de mesure et de surveillance utilisés Überwachungsgeräte für den Gebrauch in
dans des réseaux de distribution à basse tension Niederspannungs-Stromversorgungsnetzen
(IEC 61326-2-2:2020) (IEC 61326-2-2:2020)
This European Standard was approved by CENELEC on 2020-11-27. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 61326-2-2:2021 E

---------------------- Page: 3 ----------------------
SIST EN IEC 61326-2-2:2021
EN IEC 61326-2-2:2021 (E)
European foreword
The text of document 65A/977/FDIS, future edition 3 of IEC 61326-2-2, prepared by SC 65A "System
aspects" of IEC/TC 65 "Industrial-process measurement, control and automation" was submitted to the
IEC-C
...