Information technology equipment - Safety - Part 1: General requirements

2019-10-01: PR reactivated further to D156/C057 (extension of DOW of the superseding EN)
TC request (approved by D129/C108): Not offered to IEC as only valid for Europe * Voted as prAB

Einrichtungen der Informationstechnik - Sicherheit - Teil 1: Allgemeine Anforderungen

Matériel de traitement de l'information - Sécurité - Partie 1: Exigences générales

Oprema za informacijsko tehnologijo - Varnost - 1. del: Splošne zahteve

Ta standard velja za opremo za informacijsko tehnologijo z omrežnim napajanjem ali baterijskim napajanjem, vključno z električno poslovno opremo in z njo povezano opremo z OCENJEVALNO NAPETOSTJO, ki ne presega 600 V. Ta standard prav tako velja za takšne vrste opreme za informacijsko tehnologijo: - načrtovano za uporabo v telekomunikacijski opremi terminalov in opremi za telekomunikacijsko omrežno infrastrukturo, ne glede na vir napajanja; - načrtovano in namenjeno za neposredno povezavo ali uporabljeno kot infrastrukturno opremo v RAZDELITVENEM SISTEMU KABLOV, ne glede na vir napajanja; - načrtovano tako, da uporablja IZMENIČNO OMREŽNO NAPAJANJE kot medij za prenos informacij (glej točko 6, opomba 4 in 7.1, opomba 4). Ta standard prav tako velja za sestavne dele in podsklope, namenjene vključitvi v opremo za informacijsko tehnologijo. Ne pričakuje se, da so takšni sestavni deli in podsklopi v skladu z vsakim vidikom standarda, pod pogojem, da je celotna oprema za informacijsko tehnologijo, ki vsebuje takšne sestavne dele in podsklope, skladna.

General Information

Status
Withdrawn
Publication Date
05-Mar-2009
Withdrawal Date
30-Nov-2010
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
20-Dec-2020
Completion Date
20-Dec-2020

Relations

Buy Standard

Amendment
EN 60950-1:2006/A11:2009
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-maj-2009
Oprema za informacijsko tehnologijo - Varnost - 1. del: Splošne zahteve
Information technology equipment - Safety - Part 1: General requirements
Einrichtungen der Informationstechnik - Sicherheit - Teil 1: Allgemeine Anforderungen
Matériel de traitement de l'information - Sécurité - Partie 1: Exigences générales
Ta slovenski standard je istoveten z: EN 60950-1:2006/A11:2009
ICS:
35.020 Informacijska tehnika in Information technology (IT) in
tehnologija na splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60950-1/A11
NORME EUROPÉENNE
March 2009
EUROPÄISCHE NORM
ICS 35.020; 35.260
English version
Information technology equipment -
Safety -
Part 1: General requirements
Matériel de traitement de l'information -  Einrichtungen der Informationstechnik -
Sécurité - Sicherheit -
Partie 1: Exigences générales Teil 1: Allgemeine Anforderungen

This amendment A11 modifies the European Standard EN 60950-1:2006; it was approved by CENELEC on
2008-12-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: avenue Marnix 17, B - 1000 Brussels

© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60950-1:2006/A11:2009 E

Foreword
This amendment to the European Standard EN 60950-1:2006 was prepared by the Technical Committee
CENELEC TC 108X, Safety of electronic equipment within the fields of audio/video, information technology
and communication technology.
The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as
amendment A11 to EN 60950-1:2006 on 2008-12-01.
The following dates were fixed:
– latest date by which the amendment has to be implemented
at national level by publication of an identical (dop) 2009-12-01
national standard or by endorsement
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2010-12-01
__________
– 3 – EN 60950-1:2006/A11:2009
Replace the current Annex ZA by the following:
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60065 (mod) 2001 Audio, video and similar electronic apparatus - EN 60065 2002

A1 2005 Safety requirements A1 2006
+ A11 2008
1) 1)
A2 - A2 -
2) 3)
IEC 60068-2-78 - Environmental testing EN 60068-2-78 2001
Part 2-78: Tests - Test Cab: Damp heat,
steady state
2) 3)
IEC 60073 - Basic and safety principles for man-machine EN 60073 2002
interface, marking and identification - Coding
principles for indication devices and actuators
2)
IEC 60083 - Plugs and socket-outlets for domestic and - -
similar general use standardized in member
countries of IEC
IEC 60085 2004 Electrical insulation - Thermal classification EN 60085 2004
2) 3)
IEC 60112 - Method for determining the proof and EN 60112 2003
comparative tracking indices of insulating
materials
2) 3)
IEC 60216-4-1 - Guide for the determination of thermal EN 60216-4-1 2006
endurance properties of electrical insulating
materials
Part 4: Ageing ovens
Section 1: Single-chamber ovens
4)
IEC 60227 (mod) Series Polyvinyl chloride insulated cables of rated HD 21 Series
voltages up to and including 450/750V
5)
IEC 60245 (mod) Series Rubber insulated cables of rated voltages up HD 22 Series
to and including 450/750V
———————
1)
At draft stage.
2)
Undated reference.
3)
Valid edition at date of issue.
4)
The HD 21 series is related to, but not directly equivalent with the IEC 60227 series.
5)
The HD 22 series is related to, but not directly equivalent with the IEC 60245 series.

Publication Year Title EN/HD Year
IEC 60309 (mod) Series Plugs, socket-outlets and couplers for EN 60309 Series
industrial purposes
IEC 60317 Series Specifications for particular types of winding EN 60317 Series
wires
2) 3)
IEC 60317-43 - Part 43: Aromatic polyimide tape wrapped EN 60317-43 1997
round copper wire, class 240
IEC 60320 (mod) Series Appliance couplers for household and similar EN 60320 Series
general purposes
IEC 60364-1 (mod) 2001 Electrical installations of buildings HD 384.1 S2 2001
Part 1: Fundamental principles, assessment of
general characteristics, definitions
6)
IEC 60384-14 1993 Fixed capacitors for use in electronic EN 132400 1994
A1 1995 equipment
Part 14: Sectional specification: Fixed
capacitors for electromagnetic interference
suppression and connection to the supply
mains
IEC 60417 Data- Graphical symbols for use on equipment - -
base
IEC 60664-1 1992 Insulation coordination for equipment within
+ A1 2000 low-voltage systems
+ A2 2002 Part 1: Principles, requirements and tests EN 60664-1 2003
2) 3)
IEC 60695-2-11 - Fire hazard testing EN 60695-2-11 2001
Part 2-11: Glowing/hot-wire based test
methods - Glow-wire flammability test method
for end-products
2)
IEC 60695-2-20 - Part 2-20: Glowing/hot-wire based test - -
methods - Hot-wire coil ignitability -
Apparatus, test method and guidance
2) 3)
IEC 60695-10-2 - Part 10-2: Guidance and test methods for the EN 60695-10-2 2003
minimization of the effects of abnormal heat
on electrotechnical products involved in fires -
Method for testing products made from non-
metallic materials for resistance to heat using
the ball pressure test
2)
IEC 60695-11-3 - Part 11-3: Test flames - 500 W flames - - -
Apparatus and confirmational test methods
2)
IEC 60695-11-4 - Part 11-4: Test flames - 50 W flames - - -
Apparatus and confirmational test methods
2) 3)
IEC 60695-11-10 - Part 11-10: Test flames - 50 W horizontal and EN 60695-11-10 1999
3)
A1 vertical flame test methods A1 2003
———————
6)
EN 132400, Sectional Specification: Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
(Assessment level D), and its amendments are related to, but not directly equivalent to IEC 60384-14. They are superseded by
EN 60384-14:2005, which is based on IEC 60384-14:2005.

– 5 – EN 60950-1:2006/A11:2009
Publication Year Title EN/HD Year
2) 3)
IEC 60695-11-20 - Part 11-20: Test flames - 500 W flame test EN 60695-11-20 1999
3)
A1 methods A1 2003
IEC 60730-1 (mod) 1999 Automatic electrical controls for household EN 60730-1 2000
A1 2003 and similar use
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.