EN 60384-13:2006
(Main)Fixed capacitors for use in electronic equipment - Part 13: Sectional specification - Fixed polypropylene film dielectric metal foil d.c. capacitors
Fixed capacitors for use in electronic equipment - Part 13: Sectional specification - Fixed polypropylene film dielectric metal foil d.c. capacitors
is applicable to fixed direct current capacitors, using as dielectric a polypropylene film with electrodes of thin metal foils. The capacitors covered by this standard are intended for use in electronic equipment.
Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 13: Rahmenspezifikation - Festkondensatoren mit einem Dielektrikum aus Polypropylen und Belägen aus Metallfolien für Gleichspannung
Condensateurs fixes utilisés dans les équipements électroniques - Partie 13: Spécification intermédiaire - Condensateurs fixes pour courant continu à diélectrique en film de polypropylène à armatures en feuilles métalliques
Nespremenljivi kondenzatorji za elektronsko opremo – 13. del: Sektorska specifikacija – Nespremenljivi kondenzatorji za enosmerni tok s kovinsko folijo in polipropilenskim dielektrikom (IEC 60384-13:2006)
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 60384-13:2006
STANDARD
julij 2006
Nespremenljivi kondenzatorji za elektronsko opremo – 13. del: Sektorska
specifikacija – Nespremenljivi kondenzatorji za enosmerni tok s kovinsko
folijo in polipropilenskim dielektrikom (IEC 60384-13:2006)
Fixed capacitors for use in electronic equipment – Part 13: Sectional specification –
Fixed polypropylene film dielectric metal foil d.c. capacitors (IEC 60384-13:2006)
ICS 31.060.10 Referenčna številka
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
EUROPEAN STANDARD
EN 60384-3
NORME EUROPÉENNE
December 2006
EUROPÄISCHE NORM
ICS 31.060.40
English version
Fixed capacitors for use in electronic equipment
Part 3: Sectional specification: Surface mount fixed tantalum
electrolytic capacitors with manganese dioxide solid electrolyte
(IEC 60384-3:2006)
Condensateurs fixes utilisés dans Festkondensatoren zur Verwendung
les équipements électroniques in Geräten der Elektronik
Partie 3: Spécification intermédiaire: Teil 3: Rahmenspezifikation:
Condensateurs fixes électrolytiques Oberflächenmontierbare
au tantale pour montage en surface Tantal-Kondensatoren mit festem
à électrolyte solide en bioxyde Mangandioxid-Elektrolyt
de manganèse (IEC 60384-3:2006)
(CEI 60384-3:2006)
This European Standard was approved by CENELEC on 2006-11-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60384-3:2006 E
EN 60384-3:2006 - 2 -
Foreword
The text of document 40/1771/FDIS, future edition 3 of IEC 60384-3, prepared by IEC TC 40, Capacitors
and resistors for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 60384-3 on 2006-11-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-08-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-11-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60384-3:2006 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 60384-3:2006
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
1) 2)
IEC 60062 (mod) - Marking codes for resistors and capacitors EN 60062 2005
1)
IEC 60063 - Preferred number series for resistors and - -
capacitors
1) 2)
IEC 60068-1 - Environmental testing EN 60068-1 1994
Part 1: General and guidance
1) 2)
IEC 60384-1 (mod) - Fixed capacitors for use in electronic EN 60384-1 2001
equipment + corr. October 2001
Part 1: Generic specification
1)
IEC 60410 - Sampling plans and procedures for inspection - -
by attributes
1)
ISO 3 - Preferred numbers - Series of preferred - -
numbers
1)
Undated reference.
2)
Valid edition at date of issue.
INTERNATIONAL IEC
STANDARD 60384-13
QC 301800
Third edition
2006-01
Fixed capacitors for use in electronic equipment –
Part 13:
Sectional specification –
Fixed polypropylene film dielectric metal
foil d.c. capacitors
IEC 2006 Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale U
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue
– 2 – 60384-13 IEC:2006(E)
CONTENTS
FOREWORD.3
1 General .6
1.1 Scope.6
1.2 Object .6
1.3 Normative references .6
1.4 Information to be given in a detail specification .6
1.5 Terms and definitions .8
1.6 Marking .8
2 Preferred ratings and characteristics .9
2.1 Preferred characteristics .9
2.2 Preferred values of ratings .9
3 Quality assessment procedures.10
3.1 Primary stage of manufacture.10
3.2 Structurally similar components.10
3.3 Certified records of released lots.10
3.4 Qualification approval.11
3.5 Quality conformance inspection.17
4 Test and measurement procedures.19
4.1 Visual examination and check of dimensions.19
4.2 Electrical tests.19
4.3 Robustness of terminations .22
4.4 Resistance to soldering heat .22
4.5 Solderability .22
4.6 Rapid change of temperature .22
4.7 Vibration.22
4.8 Bump .23
4.9 Shock.23
4.10 Climatic sequence .24
4.11 Damp heat, steady state.25
4.12 Endurance.25
4.13 Component solvent resistance.26
4.14 Solvent resistance of the marking.26
Table 1 – Preferred tolerances.9
Table 2 – Preferred values and combinations .10
Table 3 – Sampling plan together with numbers of permissible defectives for
qualification approval tests .12
Table 4 – Test schedule for qualification approval.13
Table 5 – Lot-by-lot inspection .18
Table 6 – Periodic inspection .18
Table 7 – Test points and voltages .19
Table 8 – Insulation resistance requirements .20
Table 9 – Correction factors.21
Table 10 – Preferred severities .24
Table 11 – Test conditions.25
60384-13 IEC:2006(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –
Part 13: Sectional specification – Fixed polypropylene film
dielectric metal foil d.c. capacitors
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60384-13 h
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.