Grid connected photovoltaic systems - Minimum requirements for system documentation, commissioning tests and inspection

IEC 62446:2009 defines the minimal information and documentation required to be handed over to a customer following the installation of a grid connected PV system. Also describes the minimum commissioning tests, inspection criteria and documentation expected to verify the safe installation and correct operation of the system. Is written for grid connected PV systems only.

Netzgekoppelte Photovoltaik-Systeme - Mindestanforderungen an Systemdokumentation, Inbetriebnahmeprüfung und wiederkehrende Prüfungen

Systèmes photovoltaïques connectés au réseau électrique – Exigences minimales pour la documentation du système, les essais de mise en service et l’examen

La CEI 62446:2009 définit les informations et la documentation minimales exigées devant être remises à un client à la suite de l'installation d'un système PV connecté au réseau. Décrit également les exigences minimales des essais de mise en service, des critères d'examen et de la documentation prévus pour vérifier l'installation en toute sécurité et le fonctionnement correct du système. Concerne uniquement les systèmes PV connectés au réseau.

Fotonapetostni sistemi, priključeni na omrežje - Minimalne zahteve za sistemsko dokumentacijo, prevzemne preskuse in nadzor (IEC 62446:2009)

Ta mednarodni standard določa minimalne informacije in dokumentacijo, ki se mora predati kupcu po vgradnji fotonapetostnega sistema, priključenega na omrežje. Ta standard opisuje tudi minimalne prevzemne preskuse, nadzorna merila in dokumentacijo za preverjanje varne vgradnje in pravilnega delovanja sistema. Dokument se lahko uporablja tudi za redno ponovno preskušanje. Ta standard je napisan le za fotonapetostne sisteme, priključene na omrežje, in ne za sisteme z moduli za izmenični tok, ali sisteme, ki uporabljajo hranilnike energije (npr. baterije) ali hibridne sisteme. Ta standard se uporablja za sistemske načrtovalce in monterje fotonapetostnih sončnih sistemov, priključenih na omrežje, kot predloga za zagotavljanje učinkovite dokumentacije za kupce. S podrobnim navajanjem pričakovanih prevzemnih preskusov in nadzornih meril se uporablja tudi kot pomoč pri preverjanju/nadzoru fotonapetostnega sistema, priključenega na omrežje, po vgradnji in za nadaljnji ponovni nadzor, vzdrževanje ali spreminjanje.

General Information

Status
Withdrawn
Publication Date
07-Dec-2009
Withdrawal Date
30-Sep-2012
Drafting Committee
Parallel Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
23-Feb-2019
Completion Date
23-Feb-2019

Relations

Buy Standard

Standard
EN 62446:2010
English language
27 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-februar-2010
)RWRQDSHWRVWQLVLVWHPLSULNOMXþHQLQDRPUHåMH0LQLPDOQH]DKWHYH]DVLVWHPVNR
GRNXPHQWDFLMRSUHY]HPQHSUHVNXVHLQQDG]RU ,(&
Grid connected PV systems - Minimum requirements for system documentation,
commissioning tests, and inspection requirements
Netzgekoppelte Photovoltaik-Systeme – Mindestanforderungen an
Systemdokumentation, Inbetriebnahmeprüfung und Prüfanforderungen
Systèmes PV connectés au réseau électrique - Exigences minimales pour la
documentation du système, les essais de mise en service et exigences d'examen
Ta slovenski standard je istoveten z: EN 62446:2009
ICS:
27.160 6RQþQDHQHUJLMD Solar energy engineering
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 62446
NORME EUROPÉENNE
December 2009
EUROPÄISCHE NORM
ICS 27.160
English version
Grid connected photovoltaic systems -
Minimum requirements for system documentation,
commissioning tests and inspection
(IEC 62446:2009)
Systèmes photovoltaïques  Netzgekoppelte Photovoltaik-Systeme -
connectés au réseau électrique - Mindestanforderungen
Exigences minimales an Systemdokumentation,
pour la documentation du système, Inbetriebnahmeprüfung
les essais de mise en service et l’examen und Prüfanforderungen
(CEI 62446:2009) (IEC 62446:2009)

This European Standard was approved by CENELEC on 2009-10-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels

© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62446:2009 E
Foreword
The text of document 82/558A/FDIS, future edition 1 of IEC 62446, prepared by IEC TC 82, Solar
photovoltaic energy systems, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 62446 on 2009-10-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-10-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62446:2009 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 62446:2009
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60364 (mod) Series Low-voltage electrical installations HD 60364 Series

1) 2)
IEC 60364-6 (mod) - Low voltage electrical installations - HD 60364-6 2007
Part 6: Verification
IEC 60364-7-712 2002 Electrical installations of buildings - HD 60364-7-712 2005
Part 7-712: Requirements for special + corr. April 2006
installations or locations - Solar photovoltaic
(PV) power supply systems
IEC/TR 60755 2008 General requirements for residual current - -
operated protective devices
IEC 61557 Series Electrical safety in low voltage distribution EN 61557 Series
systems up to 1 000 V a.c. and 1 500 V d.c. -
Equipment for testing, measuring or monitoring
of protective measures
1) 2)
IEC 61730-1 (mod) - Photovoltaic (PV) module safety qualification - EN 61730-1 2007
Part 1: Requirements for construction

1)
Undated reference.
2)
Valid edition at date of issue.

IEC 62446 ®
Edition 1.0 2009-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Grid connected photovoltaic systems – Minimum requirements for system
documentation, commissioning tests and inspection

Systèmes photovoltaïques connectés au réseau électrique – Exigences
minimales pour la documentation du système, les essais de mise en service et
l’examen
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
T
CODE PRIX
ICS 27.160 ISBN 2-8318-1037-6
– 2 – 62446 © IEC:2009
CONTENTS
FOREWORD.4
INTRODUCTION.6
1 Scope and object.7
2 Normative references .7
3 Terms and definitions .7
4 System documentation requirements .8
4.1 General .8
4.2 System data .8
4.2.1 Basic system information.8
4.2.2 System designer information .8
4.2.3 System installer information.9
4.3 Wiring diagram .9
4.3.1 General .9
4.3.2 Array - general specifications .9
4.3.3 PV string information .9
4.3.4 Array electrical details .9
4.3.5 Earthing and overvoltage protection .9
4.3.6 AC system .10
4.4 Datasheets.10
4.5 Mechanical design information .10
4.6 Operation and maintenance information .10
4.7 Test results and commissioning data.10
5 Verification .10
5.1 General .10
5.2 General .11
5.3 Inspection .11
5.3.1 General .11
5.3.2 DC system inspection .11
5.3.3 Protection against overvoltage / electric shock .12
5.3.4 AC system .12
5.3.5 Labelling and identification .12
5.4 Testing .13
5.4.1 General .13
5.4.2 Continuity of protective earthing and/or equipotential bonding
conductors.
5.4.3 Polarity test .13
5.4.4 PV string - open circuit voltage measurement .13
5.4.5 PV string - current measurement .14
5.4.6 Functional tests .15
5.4.7 PV array Insulation resistance test .15
5.5 Verification reports .17
5.5.1 General .17
5.5.2 Initial verification .17
5.5.3 Periodic verification .17
Annex A (informative) Model verification certificate.18
Annex B (informative) Model inspection report .19

62446 © IEC:2009 – 3 –
Annex C (informative) Model PV array test report .21
Annex D (informative) PV array infrared camera inspection procedure.23

Table 1 – Minimum values of insulation resistance.17

– 4 – 62446 © IEC:2009
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
GRID CONNECTED PHOTOVOLTAIC SYSTEMS –
MINIMUM REQUIREMENTS FOR SYSTEM DOCUMENTATION,
COMMISSIONING TESTS AND INSPECTION

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individ
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.