CLC IEC/TR 63069:2020
(Main)Industrial-process measurement, control and automation - Framework for functional safety and security
Industrial-process measurement, control and automation - Framework for functional safety and security
This Technical Report (TR) explains and provides guidance on the common application of IEC 61508 and IEC 62443 in the area of industrial-process measurement, control and automation. This document may apply to other industrial sectors where IEC 61508 and IEC 62443 are applied.
Industrielle Prozess-Leittechnik, Steuerungs- und Automatisierungstechnik - Rahmenbedingungen für Funktionale Sicherheit und IT-Sicherheit
Mesure, commande et automation dans les processus industriels - Cadre pour la sécurité et la sûreté fonctionnelle
Meritve, krmiljenje in avtomatizacija v industrijskih procesih - Ogrodje za funkcionalno varnost in zaščito (IEC/TR 63069:2019)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2020
Meritve, krmiljenje in avtomatizacija v industrijskih procesih - Ogrodje za
funkcionalno varnost in zaščito (IEC/TR 63069:2019)
Industrial-process measurement, control and automation - Framework for functional
safety and security (IEC/TR 63069:2019)
Industrielle Prozess-Leittechnik, Steuerungs- und Automatisierungstechnik -
Rahmenbedingungen für Funktionale Sicherheit und IT-Sicherheit (IEC/TR 63069:2019)
Mesure, commande et automation dans les processus industriels – Cadre pour la
sécurité et la sûreté fonctionnelle (IEC/TR 63069:2019)
Ta slovenski standard je istoveten z: CLC IEC/TR 63069:2020
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
TECHNICAL REPORT CLC IEC/TR 63069
RAPPORT TECHNIQUE
TECHNISCHER BERICHT
February 2020
ICS 13.110; 25.040.40; 29.020
English Version
Industrial-process measurement, control and automation -
Framework for functional safety and security
(IEC/TR 63069:2019)
Mesure, commande et automation dans les processus Industrielle Prozess-Leittechnik, Steuerungs- und
industriels – Cadre pour la sécurité et la sûreté fonctionnelle Automatisierungstechnik - Rahmenbedingungen für
(IEC/TR 63069:2019) Funktionale Sicherheit und IT-Sicherheit
(IEC/TR 63069:2019)
This Technical Report was approved by CENELEC on 2020-01-27.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. CLC IEC/TR 63069:2020 E
European foreword
This document (CLC IEC/TR 63069:2020) consists of the text of IEC/TR 63069:2019 prepared by
IEC/TC 65 "Industrial-process measurement, control and automation".
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Technical Report IEC/TR 63069:2019 was approved by CENELEC as a
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 61508-1 NOTE Harmonized as EN 61508-1
IEC 61508-2 NOTE Harmonized as EN 61508-2
IEC 61508-3 NOTE Harmonized as EN 61508-3
IEC 61508-4:2010 NOTE Harmonized as EN 61508-4:2010 (not modified)
IEC 61508-5:2010 NOTE Harmonized as EN 61508-5:2010 (not modified)
IEC 61511 (series) NOTE Harmonized as EN 61511 (series)
IEC 62443-2-4:2015 NOTE Harmonized as EN IEC 62443-2-4:2019 (not modified)
IEC 62443-3-3:2013 NOTE Harmonized as EN IEC 62443-3-3:2019 (not modified)
IEC 62443-4-1 NOTE Harmonized as EN IEC 62443-4-1
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61508 series Functional safety of EN 61508 series
electrical/electronic/programmable
electronic safety-related systems
IEC 62443 series Industrial communication networks - - series
Network and system security
IEC TR 63069 ®
Edition 1.0 2019-05
TECHNICAL
REPORT
colour
inside
Industrial-process measurement, control and automation – Framework for
functional safety and security
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 13.110; 25.040.40; 29.020 ISBN 978-2-8322-6925-1
– 2 – IEC TR 63069:2019 IEC 2019
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
0.1 Purpose of this document . 6
0.2 Background. 6
0.3 Issues on the terminology . 6
0.4 Target audience . 6
1 Scope . 7
2 Normative references . 7
3 Terms, definitions, symbols, abbreviated terms and conventions . 7
3.1 Terms and definitions defined for this document . 7
3.2 Abbreviated terms . 15
3.3 Explanation for common terms with different definitions . 15
4 Context of security related to functional safety . 20
4.1 Description of functions. 20
4.2 Security environment . 20
5 Guiding principles . 22
6 Life cycle recommendations for co-engineering . 22
6.1 General . 22
6.2 Managing security related safety aspects . 25
7 Risk assessment considerations . 25
7.1 Risk assessment at higher level . 25
7.2 Trade-off analysis . 26
7.3 Considerations for threat-risk assessment . 26
7.3.1 General . 26
7.3.2 Recommendations to the threat-risk assessment . 27
7.3.3 Considerations related to security countermeasures . 27
7.3.4 Vulnerabilities and examples of root causes . 27
7.4 Malevolent and unauthorized actions . 27
7.4.1 General . 27
7.4.2 Reasonably foreseeable misuse (safety) . 28
7.4.3 Prevention of malevolent and unauthorized actions (security) . 28
7.4.4 Combination of password protection measures . 28
8 Incident response readiness and incident handling . 28
8.1 General . 28
8.2 Incident response readiness . 28
8.3 Incident handling . 28
Bibliography . 30
Figure 1 – Overview of functions of an IACS . 20
Figure 2 – Safety domain and security domain . 21
Figure 3 – Security environment . 21
Figure 4 – Safety and security interaction . 23
Figure 5 – Safety and security risk assessments as part of a risk assessment at higher
level . 26
IEC TR 63069:2019 IEC 2019 – 3 –
Table 1 – Terms with multiple definitions . 15
Table 2 – Recommended activities in life cycle stages . 24
– 4 – IEC TR 63069:2019 IEC 2019
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION –
FRAMEWORK FOR FUNCTIONAL SAFETY AND SECURITY
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC
Publication(s)"). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
The main task of IEC technical committees is to prepare International Standards. However, a
technical committee may propose the publication of a Technical Report when it has collected
data of a different ki
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.