EN 62326-1:2002
(Main)Printed boards - Part 1: Generic specification
Printed boards - Part 1: Generic specification
Defines capability approval procedures for printed boards. In addition, a technology approval schedule may also be provided as an alternative for manufacturers employing a system of process control for establishing product conformity. Both CA and TA procedures apply to printed boards irrespective of their methods of manufacture, when they are ready for the mounting of components.
Leiterplatten - Teil 1: Fachgrundspezifikation
Cartes imprimées - Partie 1: Spécification générique
Définit les procédures d'agrément de savoir-faire pour les cartes imprimées. De plus, l'agrément de technologie peut être également fourni en tant que variante pour les fabricants utilisant un système de commande de processus en vue de l'établissement de la conformité de produit. Les procédures CA et TA s'appliquent aux cartes imprimées, indépendamment de leurs procédés de fabrication, lorsqu'elles sont prêtes pour le montage des composants.
Printed boards - Part 1: Generic specification
General Information
Relations
Standards Content (Sample)
SIST EN 62326-1:2003SLOVENSKIapril 2003
STANDARDPrinted boards - Part 1: Generic specification©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST EN 62326-1:2003(en)ICS31.180
EUROPEAN STANDARDEN 62326-1NORME EUROPÉENNEEUROPÄISCHE NORMJune 2002CENELECEuropean Committee for Electrotechnical StandardizationComité Européen de Normalisation ElectrotechniqueEuropäisches Komitee für Elektrotechnische NormungCentral Secretariat: rue de Stassart 35, B - 1050 Brussels© 2002 CENELEC -All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.Ref. No. EN 62326-1:2002 EICS 31.180Supersedes EN 62326-1:1997English versionPrinted boardsPart 1: Generic specification(IEC 62326-1:2002)Cartes impriméesPartie 1: Spécification générique(CEI 62326-1:2002)LeiterplattenTeil 1: Fachgrundspezifikation(IEC 62326-1:2002)This European Standard was approved by CENELEC on 2002-06-01. CENELEC members are bound tocomply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained onapplication to the Central Secretariat or to any CENELEC member.This European Standard exists in three official versions (English, French, German). A version in any otherlanguage made by translation under the responsibility of a CENELEC member into its own language andnotified to the Central Secretariat has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
EN 62326-1:2002- 2 -ForewordThe text of document 91/274/FDIS, future edition 2 of IEC 62326-1, prepared by IEC TC 91, Electronicsassembly technology, was submitted to the IEC-CENELEC parallel vote and was approved byCENELEC as EN 62326-1 on 2002-06-01.This European Standard supersedes EN 62326-1:1997.The following dates were fixed:–latest date by which the EN has to be implementedat national level by publication of an identicalnational standard or by endorsement(dop)2003-03-01–latest date by which the national standards conflictingwith the EN have to be withdrawn(dow)2005-06-01Annexes designated "normative" are part of the body of the standard.Annexes designated "informative" are given for information only.In this standard, annexes M and ZA are normative and annexes A, B, C, D, E,
F, G, H, I, J, K and Lare informative.Annex ZA has been added by CENELEC.__________Endorsement noticeThe text of the International Standard IEC 62326-1:2002 was approved by CENELEC as a EuropeanStandard without any modification.__________
- 3 -EN 62326-1:2002Annex ZA(normative)Normative references to international publicationswith their corresponding European publicationsThis European Standard incorporates by dated or undated reference, provisions from otherpublications. These normative references are cited at the appropriate places in the text and thepublications are listed hereafter. For dated references, subsequent amendments to or revisions of anyof these publications apply to this European Standard only when incorporated in it by amendment orrevision. For undated references the latest edition of the publication referred to applies (includingamendments).NOTEWhen an international publication has been modified by common modifications, indicated by (mod), the relevantEN/HD applies.PublicationYearTitleEN/HDYearIEC 60194- 1)Printed board design, manufacture andassembly - Terms and definitions--IEC 61182-11994Printed boards - Electronic datadescription and transferPart 1: Printed board description indigital form--IEC 61189-31997Test methods for electrical materials,printed boards and otherinterconnection structures andassembliesPart 3: Test methods for interconnectionstructures (printed boards)EN 61189-31997IEC 61249-2-4- 1)Materials for printed boards and otherinterconnecting structuresPart 2-4: Reinforced base materials,clad and unclad - Polyester non-woven/woven fibreglass laminated sheetof defined flammability (vertical burningtest), copper-cladEN 61249-2-42002 2)IEC 61249-2-7- 1)Part 2-7: Reinforced base materials cladand unclad - Epoxide woven E-glasslaminated sheet of defined flammability(vertical burning test), copper-cladEN 61249-2-72002 2)IEC 61249-2-12- 1)Part 2-12: Sectional specification set forreinforced base materials, clad andunclad - Epoxide non-woven aramidlaminate of defined flammability,copper-cladEN 61249-2-121999 2)IEC 62326SeriesPrinted boardsEN 62326Series
1) Undated reference.2) Valid edition at date of issue.
EN 62326-1:2002- 4 -PublicationYearTitleEN/HDYearIEC 62326-4- 1)Part 4: Rigi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.