Security for industrial automation and control systems - Part 4-1: Secure product development lifecycle requirements

IEC 62443-4:2018(E) specifies the process requirements for the secure development of products used in industrial automation and control systems. This specification is part of a series of standards that addresses the issue of security for industrial automation and control systems (IACS). IEC 62443-4 defines secure development life-cycle (SDL) requirements related to cyber security for products intended for use in the industrial automation and control systems environment and provides guidance on how to meet the requirements described for each element. The life-cycle description includes security requirements definition, secure design, secure implementation (including coding guidelines), verification and validation, defect management, patch management and product end-of-life. These requirements can be applied to new or existing processes for developing, maintaining and retiring hardware, software or firmware. Note that these requirements only apply to the developer and maintainer of the product, and are not applicable to the integrator or the user of the product. A summary list of the requirements is provided in Annex B.

IT-Sicherheit für industrielle Automatisierungssysteme - Teil 4-1: Anforderungen an den Lebenszyklus für eine sichere Produktentwicklung

Sécurité des automatismes industriels et des systèmes de commande - Partie 4-1 : Exigences applicables au cycle de vie de développement sécurisé des produits

L'IEC 62443-4:2018 spécifie les exigences relatives au processus de développement sécurisé des produits utilisés dans des systèmes d'automatisation et de commande industriels. Elle définit un cycle de développement sécurisé (SDL – secure development life-cycle) en vue de développer et d'assurer la sécurité des produits. Ce cycle inclut la définition des exigences de sécurité, la conception sécurisée, la mise en œuvre sécurisée (y compris les lignes directrices en matière de codage), la vérification et la validation, la gestion des défauts, la gestion des correctifs et la fin de vie du produit. Ces exigences peuvent être appliquées à des processus nouveaux ou existants pour le développement, la maintenance et le retrait des matériels, logiciels et micrologiciels destinés aux produits nouveaux ou existants. Elles s'appliquent au développeur et au chargé de maintenance du produit, mais pas à l'intégrateur ni à l'utilisateur du produit. Une liste récapitulative des exigences du présent document peut être consultée à l'Annexe B.

Zaščita industrijske avtomatizacije in nadzornih sistemov - 4-1. del: Zahteve za varnost izdelka v obdobju razvoja izdelka (IEC 62443-4-1:2018)

Ta del standarda IEC 62443 določa postopkovne zahteve za varnost izdelkov v obdobju razvoja, uporabljene pri industrijski avtomatizaciji in kontrolnih sistemih. Opredeljuje varnost izdelkov v obdobju razvoja (SDL) za razvoj in ohranjanje varnosti izdelkov. To obdobje vključuje opredelitev varnostnih zahtev, varno zasnovo, varno implementacijo (vključno s smernicami glede kodiranja), preverjanje in potrjevanje, upravljanje napak, upravljanje popravkov in ravnanje ob koncu življenjske dobe izdelka. Te zahteve veljajo za nove in obstoječe postopke za razvoj, vzdrževanje in umik strojne opreme, programske opreme ali vdelane programske opreme za nove ali obstoječe izdelke. Te zahteve veljajo za razvijalca ali vzdrževalca izdelka, ne pa tudi za integratorja ali uporabnika izdelka. Zbirni seznam zahtev v tem dokumentov je mogoče najti v dodatku B.

General Information

Status
Published
Publication Date
22-Mar-2018
Withdrawal Date
18-Feb-2021
Current Stage
6060 - Document made available - Publishing
Start Date
23-Mar-2018
Completion Date
23-Mar-2018

Buy Standard

Standard
EN 62443-4-1:2018 - BARVE na PDF-str 15,16,24
English language
57 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
EN IEC 62443-4-1:2018 - BARVE
English language
57 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62443-4-1:2018
01-junij-2018
=DãþLWDLQGXVWULMVNHDYWRPDWL]DFLMHLQQDG]RUQLKVLVWHPRYGHO=DKWHYH]D
YDUQRVWL]GHONDYREGREMXUD]YRMDL]GHOND ,(&
Security for industrial automation and control systems - Part 4-1: Secure product
development lifecycle requirements (IEC 62443-4-1:2018)
IT-Sicherheit für industrielle Automatisierungssysteme - Teil 4-1: Anforderungen an den
Lebenszyklus für eine sichere Produktentwicklung (IEC 62443-4-1:2018)
Security for industrial automation and control systems - Part 4-1: Secure product
development lifecycle requirements (IEC 62443-4-1:2018)
Ta slovenski standard je istoveten z: EN IEC 62443-4-1:2018
ICS:
13.020.60 Življenjski ciklusi izdelkov Product life-cycles
25.040.01 Sistemi za avtomatizacijo v Industrial automation
industriji na splošno systems in general
SIST EN 62443-4-1:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62443-4-1:2018

---------------------- Page: 2 ----------------------

SIST EN 62443-4-1:2018


EUROPEAN STANDARD EN IEC 62443-4-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
March 2018
ICS 25.040.40; 35.030

English Version
Security for industrial automation and control systems - Part 4-1:
Secure product development lifecycle requirements
(IEC 62443-4-1:2018)
To be completed IT-Sicherheit für industrielle Automatisierungssysteme - Teil
(IEC 62443-4-1:2018) 4-1: Anforderungen an den Lebenszyklus für eine sichere
Produktentwicklung
(IEC 62443-4-1:2018)
This European Standard was approved by CENELEC on 2018-02-19. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62443-4-1:2018 E

---------------------- Page: 3 ----------------------

SIST EN 62443-4-1:2018
EN IEC 62443-4-1:2018 (E)


European foreword
The text of document 65/685/FDIS, future edition 1 of IEC 62443-4-1, prepared by IEC/TC 65
"Industrial-process measurement, control and automation" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN IEC 62443-4-1:2018.

The following dates are fixed:
• latest date by which the document has to be (dop) 2018-11-19
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2021-02-19
• latest date by which the national
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62443-4-1:2018 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:

IEC 62740 NOTE Harmonized as EN 62470.
IEC 61508 (series) NOTE Harmonized as EN 61508 (series).
ISO/IEC 27001 NOTE Harmonized as EN ISO/IEC 27001.
ISO/IEC 27002 NOTE Harmonized as EN ISO/IEC 27002.
ISO 9001 NOTE Harmonized as EN ISO 9001.

2

---------------------- Page: 4 ----------------------

SIST EN 62443-4-1:2018
EN IEC 62443-4-1:2018 (E)

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content
constitutes
...

SLOVENSKI STANDARD
SIST EN IEC 62443-4-1:2018
01-junij-2018
Zaščita industrijske avtomatizacije in nadzornih sistemov - 4-1. del: Zahteve za
varnost izdelka v obdobju razvoja izdelka (IEC 62443-4-1:2018)
Security for industrial automation and control systems - Part 4-1: Secure product
development lifecycle requirements (IEC 62443-4-1:2018)
IT-Sicherheit für industrielle Automatisierungssysteme - Teil 4-1: Anforderungen an den
Lebenszyklus für eine sichere Produktentwicklung (IEC 62443-4-1:2018)
Security for industrial automation and control systems - Part 4-1: Secure product
development lifecycle requirements (IEC 62443-4-1:2018)
Ta slovenski standard je istoveten z: EN IEC 62443-4-1:2018
ICS:
13.020.60 Življenjski ciklusi izdelkov Product life-cycles
25.040.01 Sistemi za avtomatizacijo v Industrial automation
industriji na splošno systems in general
35.030 Informacijska varnost IT Security
SIST EN IEC 62443-4-1:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62443-4-1:2018

---------------------- Page: 2 ----------------------
SIST EN IEC 62443-4-1:2018


EUROPEAN STANDARD EN IEC 62443-4-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
March 2018
ICS 25.040.40; 35.030

English Version
Security for industrial automation and control systems - Part 4-1:
Secure product development lifecycle requirements
(IEC 62443-4-1:2018)
To be completed IT-Sicherheit für industrielle Automatisierungssysteme - Teil
(IEC 62443-4-1:2018) 4-1: Anforderungen an den Lebenszyklus für eine sichere
Produktentwicklung
(IEC 62443-4-1:2018)
This European Standard was approved by CENELEC on 2018-02-19. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62443-4-1:2018 E

---------------------- Page: 3 ----------------------
SIST EN IEC 62443-4-1:2018
EN IEC 62443-4-1:2018 (E)


European foreword
The text of document 65/685/FDIS, future edition 1 of IEC 62443-4-1, prepared by IEC/TC 65
"Industrial-process measurement, control and automation" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN IEC 62443-4-1:2018.

The following dates are fixed:
• latest date by which the document has to be (dop) 2018-11-19
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2021-02-19
• latest date by which the national
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62443-4-1:2018 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:

IEC 62740 NOTE Harmonized as EN 62470.
IEC 61508 (series) NOTE Harmonized as EN 61508 (series).
ISO/IEC 27001 NOTE Harmonized as EN ISO/IEC 27001.
ISO/IEC 27002 NOTE Harmonized as EN ISO/IEC 27002.
ISO 9001 NOTE Harmonized as EN ISO 9001.

2

---------------------- Page: 4 ----------------------
SIST EN IEC 62443-4-1:2018
EN IEC 62443-4-1:2018 (E)

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.