EN 61003-1:2016

Industrial-process control systems - Instruments with analogue inputs and two- or multi-position outputs - Part 1: Methods for evaluating performance

IEC 61003-1:2016 is applicable to pneumatic and electric industrial-process instruments or control device using measured values that are continuous signals either a mechanical (position, force, etc.) or a standard electric signal. It is intended to specify uniform terminologies and testing methods for performance evaluation of industrial-process instruments or process control systems modules with analogue measured values and two- or multi-position outputs. This third edition cancels and replaces the second edition published in 2004. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - use of the term "two-position output" instead of "two-state instrument" (see 3.2); - use of the term "differential gap" instead of "switching differential" (see 3.4); - use of "fast transient/burst immunity requirements" instead of "power supply transient overvoltages", and revision of the test method (see 6.2.10); - deletion of 6.2.12 "common mode interference" and 6.2.13 "normal mode interference (series mode) "tests of the previous edition; - use of the term "electromagnetic field" instead of "radiated electromagnetic interference", the test method remained the same (see 6.2.16); - use of the term "dielectric strength" instead of "isolation test", and revision of the reference (see 6.3.4); - deletion of Subclauses "8.2 Design features", "10.1 Routine maintenance and adjustment" and "10.2 Repair" of the previous edition.

Systeme der industriellen Prozessleittechnik - Geräte mit analogen Eingängen und Zwei- oder Mehrpunkt-Ausgängen - Teil 1: Verfahren zur Bewertung des Betriebsverhaltens

Systèmes de commande de processus industriels - Instruments avec entrées analogiques et sorties à deux ou plusieurs positions - Partie 1: Méthodes d'évaluation des performances

L'IEC 61003-1:2016 est applicable aux dispositifs de commande ou instruments électriques et pneumatiques des processus industriels, utilisant des valeurs mesurées qui sont des signaux continus, c'est-à-dire soit un signal mécanique (position, force, etc.) soit un signal électrique normalisé. Elle a pour objet de spécifier des terminologies et des méthodes d'essais uniformes pour l'évaluation des performances des instruments des processus industriels ou des modules de systèmes de commande de processus avec valeurs mesurées analogiques et sorties à deux ou plusieurs positions. Cette troisième édition annule et remplace la deuxième édition parue en 2004. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - utilisation de l'expression "sortie à deux positions" au lieu de "instrument à deux états" (voir en 3.2); - utilisation du terme "recouvrement" au lieu de "différentiel de commutation" (voir en 3.4); - utilisation de l'expression "Exigences relatives à l'immunité aux transitoires rapides/en salves" au lieu de "Surtensions transitoires d'alimentation", et révision de la méthode d'essai (voir en 6.2.10); - suppression des essais du 6.2.12 "Influence en mode commun" et du 6.2.13 "Influence en mode normal (mode série)", issus de la précédente édition; - utilisation de l'expression "champ électromagnétique" au lieu de "interférence électromagnétique rayonnée", la méthode d'essai restant inchangée (voir en 6.2.16); - utilisation de l'expression "rigidité diélectrique" au lieu de "essai d'isolation", et révision de la référence (voir en 6.3.4); - suppression des paragraphes "8.2 Caractéristiques de conception", "10.1 Entretien et ajustement" et "10.2 Réparation" de la précédente édition.

Nadzorni sistemi za industrijske procese - Instrumenti z analognimi vhodi in dvo- ali večpozicijskimi izhodi - 1. del: Postopki za ocenjevanje zmogljivosti (IEC 61003-1:2016)

Ta del standarda IEC 61003 se uporablja za pnevmatske in električne instrumente za industrijske procese ali nadzorne naprave, ki uporabljajo izmerjene vrednosti, ki so neprekinjeni signali, in sicer mehanski (položaj, sila itd.) ali standardni električni signali.
Ti instrumenti ali moduli za nadzorne sisteme za procese se lahko uporabljajo kot alarmni krmilniki ali stikala in za druge podobne namene.
Težave zaradi varnosti elektronskih izdelkov lahko vplivajo na le nekaj izdelkov, ki so zajeti v tem dokumentu. Zato ta dokument ne obravnava teh varnostnih vprašanj. Ta standard določa enotno terminologijo in preskusne metode za ocenjevanje zmogljivosti instrumentov za industrijske procese ali module za nadzorne sisteme za procese z analogno izmerjenimi vrednostmi in dvo- ali večpozicijskimi izhodi. Dejavniki, ki niso povezani z zmogljivostjo, so navedeni v točki 10.

General Information

• Status: Published
• Publication Date: 03-Nov-2016
• Withdrawal Date: 03-Nov-2019
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.240.50 - IT applications in industry
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65B - IEC_SC_65B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 04-Nov-2016
• Completion Date: 04-Nov-2016
• Ref Project: SIST EN 61003-1:2017 - Industrial-Process control systems - Instruments with analogue inputs and two- or multi-position outputs - Part 1: Methods of evaluating the performance (IEC 61003-1:2016)

Relations

• Replaces: EN 61003-1:2004 - Industrial-process control systems - Instruments with analogue inputs and two- or multi-state outputs - Part 1: Methods of evaluating performance
• Effective Date: 08-Nov-2016

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61003-1:2017
01-marec-2017
1DGRPHãþD
SIST EN 61003-1:2004
1DG]RUQLVLVWHPL]DLQGXVWULMVNHSURFHVH,QVWUXPHQWL]DQDORJQLPLYKRGLLQGYR
DOLYHþSR]LFLMVNLPLL]KRGLGHO3RVWRSNL]DRFHQMHYDQMH]PRJOMLYRVWL,(&

Industrial-Process control systems - Instruments with analogue inputs and two- or multi-
position outputs - Part 1: Methods of evaluating the performance (IEC 61003-1:2016)
Systeme der industriellen Prozessleittechnik - Geräte mit analogen Eingängen und Zwei-
oder Mehrpunktverhalten - Teil 1: Verfahren zur Bewertung des Betriebsverhaltens (IEC
61003-1:2016)
Système de commande de processus industriels - Instruments avec entrées analogiques
et sorties à deux ou plusieurs positions - Partie 1: Méthodes d’évaluation des
performances (IEC 61003-1:2016)
Ta slovenski standard je istoveten z: EN 61003-1:2016
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
SIST EN 61003-1:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61003-1:2017

---------------------- Page: 2 ----------------------

SIST EN 61003-1:2017


EUROPEAN STANDARD EN 61003-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
November 2016
ICS 25.040.40; 35.240.50 Supersedes EN 61003-1:2004
English Version
Industrial-process control systems - Instruments with analogue
inputs and two- or multi-position outputs - Part 1: Methods for
evaluating performance
(IEC 61003-1:2016)
Systèmes de commande de processus industriels - Systeme der industriellen Prozessleittechnik - Geräte mit
Instruments avec entrées analogiques et sorties à deux ou analogen Eingängen und Zwei- oder Mehrpunktverhalten -
plusieurs positions - Partie 1: Méthodes d'évaluation des Teil 1: Verfahren zur Bewertung des Betriebsverhaltens
performances (IEC 61003-1:2016)
(IEC 61003-1:2016)
This European Standard was approved by CENELEC on 2016-07-19. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 61003-1:2016 E

---------------------- Page: 3 ----------------------

SIST EN 61003-1:2017
EN 61003-1:2016
European foreword
The text of document 65B/1040/FDIS, future edition 3 of IEC 61003-1, prepared by SC 65B
"Measurement and control devices", of IEC/TC 65 "Industrial-process measurement, control and
automation" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 61003-1:2016.
The following dates are fixed:
• latest date by which the document has to be implemented at (dop) 2017-05-04
national level by publication of an identical national
standard or by endorsement
(dow) 2019-11-04
• latest date by which the national standards conflicting with
the document have to be withdrawn

This document supersedes EN 61003-1:2004.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61003-1:2016 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated :
IEC 61326-1:2012 NOTE Harmonized as EN 61326-1:2013 (not modified).

2

---------------------- Page: 4 ----------------------

SIST EN 61003-1:2017
EN 61003-1:2016
Annex ZA
(normative)
...