iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 61310-2:1995

(Main)

Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking

Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking

Specifies requirements for the marking of machinery. Gives general rules for identification of machinery, for safe use related to mechanical and electrical hazards, and for the avoidance of hazards arising from incorrect connections.

Sicherheit von Maschinen - Anzeigen, Kennzeichen und Bedienen - Teil 2: Anforderungen an die Kennzeichnung

Sécurité des machines - Indication, marquage et manoeuvre - Partie 2: Spécifications pour le marquage

Spécifie des exigences concernant le marquage des machines. Définit les règles générales de marquage pour l'identification des machines, pour leur utilisation sûre, relatives aux risques mécaniques et électriques, et pour éviter les risques liés à des liaisons erronées.

Safety of machinery - Indication, marking and actuation -- Part 2: Requirements for marking (IEC 61310-2:1995)

General Information

Status
Withdrawn
Publication Date
14-Mar-1995
Withdrawal Date
31-Dec-1995
ICS
01.080.20 - Graphical symbols for use on specific equipment
13.110 - Safety of machinery
Technical Committee
CLC/TC 44X - Safety of machinery: electrotchnical aspects
Drafting Committee
IEC/TC 44 - IEC_TC_44
Parallel Committee
IEC/TC 44 - IEC_TC_44
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Dec-2010
Completion Date
01-Dec-2010
Directive
2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
73/23/EEC - Electrical equipment designed for use within certain voltage limits
98/37/EC - Machinery
Mandate
BC-CEN 13-88 - BC-CEN 13-88
Ref Project
SIST EN 61310-2:1999 - Safety of machinery - Indication, marking and actuation -- Part 2: Requirements for marking

Relations

Replaced By
EN 61310-2:2008 - Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
Effective Date
29-Jan-2023

Buy Standard

EN 61310-2:1999EN 61310-2:1999
PreviousNext
Standard
EN 61310-2:1999
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-1999
Safety of machinery - Indication, marking and actuation -- Part 2: Requirements for
marking (IEC 61310-2:1995)
Safety of machinery - Indication, marking and actuation -- Part 2: Requirements for
marking
Sicherheit von Maschinen - Anzeigen, Kennzeichen und Bedienen -- Teil 2:
Anforderungen an die Kennzeichnung
Sécurité des machines - Indication, marquage et manoeuvre --
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN 61310-3:2008(Main)
Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators
SIST EN 61310-3:2008

Specifies safety-related requirements for actuators, operated by the hand or by other parts of the human body, at the human-machine interface. It gives general requirements for the standard direction of movement for actuators; the arrangement of an actuator in relation to other actuators; the correlation between an action and its final effects. It includes the following significant technical changes with respect to the previous edition: Table 1, Table 2 and Table A.1 have been revised editorially.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61310-1:2008(Main)
Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
SIST EN 61310-1:2008

Specifies requirements for visual, acoustic and tactile methods of indicating safety-related information, at the human-machine interface and to exposed persons. It specifies a system of colours, safety signs, markings and other warnings, intended for use in the indication of hazardous situations and health hazards and for meeting certain emergencies. It also specifies ways of coding visual, acoustic and tactile signals for indicators and actuators to facilitate the safe use and monitoring of the machinery. It includes the following significant technical changes with respect to the previous edition: Adapted to the basic standards IEC 60073, IEC 60417, ISO 3864-1, ISO 7000 and ISO 7010

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61310-2:2008(Main)
Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
SIST EN 61310-2:2008

It gives general rules on marking for identification of machinery, for safe use related to mechanical and electrical hazards, and for the avoidance of hazards arising from incorrect connections. Includes the following significant technical changes with respect to the previous edition: Annex A: additional safety signs included and updated.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60445:2021(Main)
Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors
SIST EN IEC 60445:2021

IEC 60445:2021 is available as IEC 60445:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60445:2021 applies to the identification and marking of terminals of electrical equipment such as resistors, fuses, relays, contactors, transformers, rotating machines and, wherever applicable, to combinations of such equipment (e.g. assemblies), and also applies to the identification of terminations of certain designated conductors. It also provides general rules for the use of certain colours or alphanumeric notations to identify conductors with the aim of avoiding ambiguity and ensuring safe operation. These conductor colours or alphanumeric notations are intended to be applied in cables or cores, busbars, electrical equipment and installations. This basic safety publication is primarily intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. It has the status of a basic safety publication in accordance with IEC Guide 104. IEC 60445:2021 cancels and replaces the sixth edition published in 2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) the definitions have been aligned with IEC 60050-195:2021 and IEC 60050-826; b) the provisions for colour to be used for identification of certain designated conductors are made requirements and not only recommendations; c) introduction of a new subclause on marking of protective terminals for multiple power supply inputs on equipment.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61310-3:2008(Main)
Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators
SIST EN 61310-3:2008

Specifies safety-related requirements for actuators, operated by the hand or by other parts of the human body, at the human-machine interface. It gives general requirements for the standard direction of movement for actuators; the arrangement of an actuator in relation to other actuators; the correlation between an action and its final effects. It includes the following significant technical changes with respect to the previous edition: Table 1, Table 2 and Table A.1 have been revised editorially.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61310-1:2008(Main)
Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
SIST EN 61310-1:2008

Specifies requirements for visual, acoustic and tactile methods of indicating safety-related information, at the human-machine interface and to exposed persons. It specifies a system of colours, safety signs, markings and other warnings, intended for use in the indication of hazardous situations and health hazards and for meeting certain emergencies. It also specifies ways of coding visual, acoustic and tactile signals for indicators and actuators to facilitate the safe use and monitoring of the machinery. It includes the following significant technical changes with respect to the previous edition: Adapted to the basic standards IEC 60073, IEC 60417, ISO 3864-1, ISO 7000 and ISO 7010

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61310-2:2008(Main)
Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
SIST EN 61310-2:2008

It gives general rules on marking for identification of machinery, for safe use related to mechanical and electrical hazards, and for the avoidance of hazards arising from incorrect connections. Includes the following significant technical changes with respect to the previous edition: Annex A: additional safety signs included and updated.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60034-9:2024(Main)
Rotating electrical machines - Part 9: Noise limits
SIST EN IEC 60034-9:2025

IEC 60034-9:2021 specifies test methods for the determination of sound power level of rotating electrical machines and specifies maximum A-weighted sound power levels for factory acceptance testing of network-supplied, rotating electrical machines in accordance with lEC 60034-1, having methods of cooling according to lEC 60034-6 and degrees of protection according to lEC 60034-5, and having the following characteristics: - standard design, either AC or DC, without additional special electrical, mechanical, or acoustical modifications intended to reduce the sound power level - rated output from 1 kW (or kVA) up to and including 5 500 kW (or kVA) - rated speed not greater than 3 750 min–1 This fifth edition cancels and replaces the fourth edition, published in 2003 and its amendment 1, published in 2007. This edition includes the following significant technical changes with respect to the previous edition: a) In Table 2 and Table 3 cooling methods IC01, IC11, IC21 and IC31, IC71, IC81 are now covered. b) This edition adds Table 3 for 60 Hz machines, whereas Table 2, which covers only 50 Hz machines, has no change in levels. c) In Table 3, grade A is added to harmonize the highest levels seen in IEC and NEMA, whereas grade B was added to harmonize the lowest, more restrictive levels seen in IEC and NEMA. d) The clause “Determination of noise increments caused by converter supply” has been shifted to Annex B and renamed “Information on typical noise increments caused by converter supply”.

  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60034-12:2024(Main)
Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors
SIST EN IEC 60034-12:2025

IEC 60034-12:2024 is available as IEC 60034-12:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60034-12:2024 specifies the parameters for eight designs of starting performance of single-speed three-phase 50 Hz or 60 Hz cage induction motors in accordance with IEC 60034‑1 that: - have a rated voltage up to 1 000 V; - are intended for direct-on-line or star-delta starting; - are rated on the basis of duty type S1; - are constructed to any degree of protection as defined in IEC 60034-5 and explosion protection. This document also applies to dual voltage motors provided that the flux saturation level is the same for both voltages. This fourth edition cancels and replaces the third edition published in 2016. Aligned with the requirements for explosion protected motors from TC31 WG27 - new clause on methods for measuring locked-rotor current and torque; - new informative annex on the general current and torque characteristics with locked rotor; - new informative annex on correction of voltage and frequency; - aligned with the requirements for explosion protected motors from TC31 WG27.

  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60335-2-39:2024(Main)
Household and similar electrical appliances - Safety - Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans
SIST EN IEC 60335-2-39:2025

IEC 60335-2-39:2012 deals with the safety of electrically operated commercial multi-purpose cooking pans not intended for household and similar use, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral and 480 V for other appliances. This standard also deals with pressurized appliances and appliances with pressurized parts. These appliances are used for processing food for commercial consumption, for example in kitchens of restaurants, canteens, hospitals and in commercial enterprises such as bakeries, butcheries, etc. The electrical part of appliances making use of other forms of energy is also within the scope of this standard. As far as is practicable, this standard deals with the common hazards presented by these types of appliances. Attention is drawn to the fact that for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary. The principal changes in this edition as compared with the fifth edition of IEC 60335-2-39 are as follows (minor changes are not listed): - addition to definition of portable appliances, atmospheric multi-purpose cooking and rated pressure; - deletion of equipotential symbol 5021 of IEC 60417 covered by Part 1; - addition of instructions for multi-purpose cooking pans; - modification on leakage current permissible for portable class l appliances; - addition to abnormal test requirements; - addition to mechanical hazard test for multi-purpose cooking pans; - addition of construction test for multi-purpose cooking pans; - addition to construction requirements for lids and theirs grips; - addition to construction requirements for positioning of pressure reliefs; - addition to construction's fixed appliances which are moved forward and backward for cleaning purposes.
The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of publication. Keywords: Multi-purpose cooking pans.

  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day