iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 62040-3:2001

(Main)

Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements

Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements

Applies to electronic direct a.c. converter systems with electrical energy storage means in the d.c. link. Ensures continuity of an alternating power source. Also includes the method of specifying all power switches that form integral parts of a UPS and are associated with its output. Included are interrupters, bypass switches, isolating switches, load transfer switches and tie switches. does not refer to cnventional mains distirbution boards, rectifier input switches or d.c. switches or UPS based on rotating machines. Defines a complete uninterruptible power system in terms of its performance and not individual UPS functional units.

Unterbrechungsfreie Stromversorgungssysteme (USV) - Teil 3: Methoden zum Festlegen der Leistungs- und Prüfungsanforderungen

Alimentations sans interruption (ASI) - Partie 3: Méthode de spécification des performances et procédures d'essai

S'applique aux systèmes convertisseurs indirects électroniques à courant alternatif possédant un moyen d'accumulation d'énergie électrique dans la liaison continue. Assure la permanence d'une source d'alimentation alternative. Comprend aussi la méthode de spécification de tous les interupteurs de puissance qui font partie intégrante d'une ASI et sont associés à sa sortie. Inclut les interrupteurs, les interrupteurs de by-pass, les interrupteurs d'isolement, les interrupteurs de transfert de la charge et es interrupteurs de liaison. Ne concerne pas les tableaux de distribution conventionnels, les interrupteurs des convertisseurs d'entrée ou les interrupteurs à courant continue ou l'ASI à la base de machines tournantes. Définit les caractéristiques de fonctionnement d'une ASI complète et non ses unités fonctionnelles considérées comme des sous-systèmes individuels.

Uninterruptible power system (UPS) – Part 3: Method of test requirements (IEC 62040-3:1999 Modified)

General Information

Status
Withdrawn
Publication Date
25-Jun-2001
Withdrawal Date
31-Jul-2003
ICS
29.200 - Rectifiers. Convertors. Stabilized power supply
Technical Committee
CLC/TC 22X - Power electronics
Drafting Committee
IEC/SC 22H - IEC_SC_22H
Parallel Committee
IEC/SC 22H - IEC_SC_22H
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
18-Apr-2014
Completion Date
18-Apr-2014
Ref Project
SIST EN 62040-3:2002 - Uninterruptible power systems (UPS) -- Part 3: Method of specifying the performance and test requirements

Relations

Replaces
ENV 50091-3:1998 - Uninterruptible Power Systems (UPS) - Part 3: Performance requirements and test methods
Effective Date
28-Jan-2023
Replaced By
EN 62040-3:2011 - Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements
Effective Date
28-Jan-2023
Amended By
EN 62040-3:2001/A11:2009 - Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements
Effective Date
28-Jan-2023

Buy Standard

EN 62040-3:2002EN 62040-3:2002
PreviousNext
Standard
EN 62040-3:2002
English language
108 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62040-3:2002
01-marec-2002
1DGRPHãþD
SIST ENV 50091-3:2001
Uninterruptible power system (UPS) – Part 3: Method of test requirements (IEC
62040-3:1999 Modified)
Uninterruptible power systems (UPS) -- Part 3: Method of specifying the performance
and test requirements
Unterbrechungsfreie Stromversorgungssysteme -- Teil 3: Methoden zum Festlegen der
Leistungs- und Prüfungsanforderungen
Alimentations sans interruption (ASI) -- Partie 3: Méthode de spécification des
performances et procédures d'essai
Ta slovenski standard je istoveten z: EN 62040-3:2001
ICS:
29.200 8VPHUQLNL3UHWYRUQLNL Rectifiers. Convertors.
6WDELOL]LUDQRHOHNWULþQR Stabilized power supply
QDSDMDQMH
SIST EN 62040-3:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 2 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 3 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 4 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 5 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 6 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 7 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 8 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 9 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 10 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 11 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 12 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 13 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 14 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 15 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 16 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 17 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 18 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 19 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 20 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 21 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 22 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 23 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 24 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 25 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 26 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 27 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 28 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 29 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 30 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 31 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 32 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 33 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 34 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 35 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 36 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 37 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 38 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 39 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 40 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 41 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 42 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 43 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 44 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 45 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 46 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 47 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 48 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 49 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 50 ----------------------

SIST EN 62040-3:2002

---------------------- Page: 51 ----------------------

SIST EN 6
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 61800-5-3:2023(Main)
Adjustable speed electrical power drive systems - Part 5-3: Safety requirements - Functional, electrical and environmental requirements for encoders
SIST EN IEC 61800-5-3:2024

IEC 61800-5-3:2021, which is a product standard, specifies requirements and makes recommendations for the design and development, integration and validation of safety-related encoder (Encoder(SR)) in terms of their functional safety considerations, electrical safety and environmental conditions. It applies to Encoder(SR), being sensors as part of a PDS(SR). This document can also be referred to and used for Encoder(SR) in any other safety-related application, for example safety-related position monitoring. This document is applicable where functional safety of an encoder is claimed and the Encoder(SR) is operating mainly in the high demand or continuous mode. The requirements of IEC 61800-5-2:2016 for PDS(SR) apply to Encoder(SR) as applicable. This document includes additional or different requirements for Encoder(SR). It sets out safety-related considerations of Encoder(SR) in terms of the framework of IEC 61508 (all parts), and introduces requirements for Encoder(SR) as subsystems of a safety-related system. It is intended to facilitate the realisation of the electrical/electronic/programmable electronic (E/E/PE) and mechanical parts of an Encoder(SR) in relation to the safety performance of safety sub-function(s) of an Encoder(SR).

  • Standard
    108 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62477-1:2023(Main)
Safety requirements for power electronic converter systems and equipment - Part 1: General
SIST EN IEC 62477-1:2024

IEC 62477-1:2022 applies to power electronic converter systems (PECS), any specified accessories, and their components for electronic power conversion and electronic power switching, including the means for their control, protection, monitoring and measurement, such as with the main purpose of converting electric power, with rated system voltages not exceeding 1 000 V AC or 1 500 V DC. This document also applies to PECS which intentionally emit or receive radio waves for the purpose of radio communication. This document can also be used as a reference standard for product committees producing product standards for:  
adjustable speed electric power drive systems (PDS);
standalone uninterruptible power systems (UPS);
low voltage stabilized DC power supplies;
bidirectional power converters.  For PECS and their specified accessories for which no product standard exists, this document provides minimum requirements for safety aspects. This document has the status of a group safety publication in accordance with IEC Guide 104 for power electronic converter systems for solar, wind, tidal, wave, fuel cell or similar energy sources. According to IEC Guide 104, one of the responsibilities of technical committees is, wherever applicable, to make use of basic safety publications and/or group safety publications in the preparation of their product standards. Guidance for use of this group safety publication for product committees is given in Annex S. This document  
establishes a common terminology for safety aspects relating to PECS,
establishes minimum requirements for the coordination of safety aspects of interrelated parts within a PECS,
establishes a common basis for minimum safety requirements for the PECS portion of products that contain PECS,
specifies requirements to reduce risks of fire, electric shock, thermal, energy and mechanical hazards, during use and operation and, where specifically stated, during service and maintenance, and
specifies minimum requirements to reduce risks with respect to PECS designed as pluggable and permanently connected equipment, whether it consists of a system of interconnected units or independent units, subject to installing, operating and maintaining the PECS in the manner prescribed by the manufacturer.  This document does not cover  
telecommunications apparatus other than power supplies to such apparatus,
functional safety aspects as covered by, for example, IEC 61508 (all parts), and
electrical equipment and systems for railways applications and electr

  • Standard
    257 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62040-1:2019/A1:2023(Amendment)
Uninterruptible power systems (UPS) - Part 1: Safety requirements
SIST EN IEC 62040-1:2019/A1:2024

No scope available

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61800-3:2023(Main)
Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods for PDS and machine tools
SIST EN IEC 61800-3:2024

IEC 61800-3:2022 specifies electromagnetic compatibility (EMC) requirements for adjustable speed power drive systems (PDSs) and machine tools (MTs). A PDS is an AC or DC motor drive including an electronic converter. Requirements are stated for AC and DC PDSs and MTs with input and/or output voltages (line-to-line voltage), up to 35 kV AC RMS. This document applies to equipment of all power ratings. As a product EMC standard, this document can be used for the assessment of PDS and MT. It can also be used for the assessment of complete drive modules (CDM) or basic drive modules (BDM). Traction applications and electric vehicles are excluded. Equipment which is defined as group 2 in CISPR 11:2015 is excluded. This document does not give requirements for the electrical machine which converts power between the electrical and mechanical forms within the PDS. Requirements for rotating electrical machines are covered by the IEC 60034 series. In this document, the term "motor" is used to describe the electrical machine, whether rotary or linear, and regardless of the direction of power flow. This document is applicable to BDMs, CDMs, PDSs and MTs with or without radio function. However, this document does not specify any radio transmission and reception requirements. This document defines the minimum requirements for emission and immunity in the frequency range from 0 Hz to 400 GHz. Tests are not required in frequency ranges where no requirements are specified. This fourth edition cancels and replaces the third edition published in 2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
extension of the scope to machine tools with one or more embedded PDS;
extension of the frequency range for radiated immunity tests to 6 GHz;
general updates in the normative part and the informative annexes.

  • Standard
    133 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61800-5-1:2023(Main)
Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy
SIST EN IEC 61800-5-1:2024

IEC 61800-5-1:2022 specifies requirements for adjustable speed electrical power drive systems (PDS) or their elements, with respect to electrical, thermal, fire, mechanical, energy and other relevant hazards. It does not cover the driven equipment except for interface requirements. It applies to adjustable speed electrical PDS which include the power conversion, basic drive module (BDM)/complete drive module (CDM) control, and a motor or motors. Excluded are traction and electric vehicle BDM/CDM. It applies to low-voltage adjustable speed electrical PDS intended to feed a motor or motors from a BDM/CDM connected to phase-to-phase voltages of up to and including 1,0 kV AC (50 Hz or 60 Hz) and up to and including 1,5 kV DC. It also applies to high-voltage adjustable speed electrical PDS intended to feed a motor or motors from a BDM/CDM connected to phase-to-phase voltages of up to and including 35 kV AC (50 Hz or 60 Hz) and up to and including 52 kV DC. This document also applies to PDS which intentionally emits or receives radio waves for the purpose of radio communication. This edition includes the following significant technical changes with respect to the previous edition: a) harmonization with IEC 62477-1:2022; b) harmonization with UL 61800-5-1 and CSA C22.2 No. 274, including an annex with a list of national deviation which was considered not possible to harmonize within a reasonable timeframe; c) more detailed information about the evaluation of components according to this document and relevant safety component standards; d) updated requirement for mechanical hazards including multiple IP ratings.

  • Standard
    446 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62751-2:2014/A2:2023(Amendment)
Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 2: Modular multilevel converters
SIST EN 62751-2:2014/A2:2024
  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62927:2017/A1:2023(Amendment)
Voltage sourced converter (VSC) valves for static synchronous compensator (STATCOM) - Electrical testing
SIST EN 62927:2018/A1:2023
  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60700-3:2023(Main)
Thyristor valves for high voltage direct current (HVDC) power transmission - Part 3: Essential ratings (limiting values) and characteristics
SIST EN IEC 60700-3:2023

This part of IEC 60700 specifies the service conditions, the definitions of essential ratings and characteristics of thyristor valves utilized in line commutated converters with three-phase bridge connections to realize the conversion from AC to DC and vice versa for high voltage direct current (HVDC) power transmission applications. It is applicable for air insulated, liquid cooled and indoor thyristor valves.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62751-1:2014/A2:2022(Amendment)
Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 1: General requirements
SIST EN 62751-1:2014/A2:2022
  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60700-1:2015/A1:2021(Amendment)
Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing
SIST EN 60700-1:2015/A1:2022

No scope available

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day