EN 60352-8:2011

Solderless connections - Part 8: Compression mount connections - General requirements, test methods and practical guidance

IEC 60352-8:2011 Is applicable to compression mount connections with metallic spring contacts for use in telecommunication equipments and in other electronic devices employing similar techniques. Information on materials and data from industrial experience are included in addition to the test procedures to provide electrically stable connections under prescribed environmental conditions. The object of this part of IEC 60352 is to determine the suitability of compression mount connections under specified electrical, mechanical and atmospheric conditions and to provide a means of comparing test results when the tools used to make the connectors are of different designs or manufacture.

Lötfreie Verbindungen - Teil 8: Druckmontage-Verbindungen - Allgemeine Anforderungen, Prüfverfahren und Anwendungshinweise

Connexions sans soudure - Partie 8: Connexions par compression - Exigences générales, méthodes d'essai et guide pratique

La CEI 60352-8:2011 est applicable aux connexions par compression comportant des contacts à ressort métalliques, utilisées dans les équipements de télécommunication et autres systèmes électroniques employant des techniques similaires. Des informations sur les matériaux et des résultats en retour d'expérience industrielle sont inclus en plus des méthodes d'essais, pour assurer des connexions électriquement stables dans les conditions d'environnement prescrites. La présente norme a pour objet de déterminer la bonne adaptation des connexions par compression dans des conditions électriques, mécaniques et atmosphériques spécifiées et de fournir un moyen de comparaison des résultats d'essai lorsque les outils utilisés pour réaliser les connexions sont de conception ou de fabrication différente.

Nespajkani spoji - 8. del: Spoji s stiskanjem - Splošne zahteve, preskusne metode in praktični napotki (IEC 60352-8:2011)

Ta del IEC 60352 velja za spoje s stiskanjem s kovinskimi vzmetnimi stiki za uporabo v telekomunikacijski opremi in v drugih elektronskih napravah, ki uporabljajo podobne tehnike.
Poleg preskusnih postopkov so vključene informacije o materialih in podatki iz industrijskih izkušenj za zagotovitev električno stabilnih spojev pod predpisanimi okoljskimi pogoji.
Namen tega dela IEC 60352 je določiti primernost spojev s stiskanjem pod določenimi električnimi, mehanskimi in atmosferskimi pogoji in zagotoviti sredstvo za primerjavo preskusnih rezultatov, kadar so orodja za izdelavo spojev različne zasnove in izdelave.

General Information

• Status: Published
• Publication Date: 24-Mar-2011
• Withdrawal Date: 16-Mar-2014
• ICS: 13.220.10 - Fire-fighting
• Technical Committee: CLC/SR 48B - Connectors
• Drafting Committee: IEC/SC 48B - IEC_SC_48B
• Parallel Committee: IEC/SC 48B - IEC_SC_48B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 25-Mar-2011
• Completion Date: 25-Mar-2011
• Ref Project: SIST EN 60352-8:2011 - Solderless connections - Part 8: Compression mount connections - General requirements, test methods and practical guidance (IEC 60352-8:2011)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60352-8:2011
01-maj-2011
1HVSDMNDQLVSRMLGHO6SRMLVVWLVNDQMHP6SORãQH]DKWHYHSUHVNXVQHPHWRGH
LQSUDNWLþQLQDSRWNL,(&
Solderless connections - Part 8: Compression mount connections - General
requirements, test methods and practical guidance (IEC 60352-8:2011)
Lötfreie Verbindungen - Teil 8: Druckmontage-Verbindungen - Allgemeine
Anforderungen, Prüfverfahren und Anwendungshinweise (IEC 60352-8:2011)
Connexions sans soudure - Partie 8: Connexions par compression - Exigences
générales, méthodes d'essai et guide pratique (CEI 60352-8:2011)
Ta slovenski standard je istoveten z: EN 60352-8:2011
ICS:
29.120.20 Spojni elementi Connecting devices
SIST EN 60352-8:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60352-8:2011

---------------------- Page: 2 ----------------------

SIST EN 60352-8:2011

EUROPEAN STANDARD
EN 60352-8

NORME EUROPÉENNE
March 2011
EUROPÄISCHE NORM

ICS 13.220.10


English version


Solderless connections -
Part 8: Compression mount connections -
General requirements, test methods and practical guidance
(IEC 60352-8:2011)


Connexions sans soudure -  Lötfreie Verbindungen -
Partie 8: Connexions par compression - Teil 8: Druckmontage-Verbindungen -
Exigences générales, méthodes d'essai et Allgemeine Anforderungen, Prüfverfahren
guide pratique und Anwendungshinweise
(CEI 60352-8:2011) (IEC 60352-8:2011)




This European Standard was approved by CENELEC on 2011-03-17. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60352-8:2011 E

---------------------- Page: 3 ----------------------

SIST EN 60352-8:2011
EN 60352-8:2011 - 2 -
Foreword
The text of document 48B/2223/FDIS, future edition 1 of IEC 60352-8, prepared by SC 48B, Connectors,
of IEC TC 48, Electromechanical components and mechanical structures for electronic equipment, was
submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60352-8 on
2011-03-17.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2011-12-17
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2014-03-17
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60352-8:2011 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 60352-8:2011
- 3 - EN 60352-8:2011

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 60050-581 2008 International Electrotechnical Vocabulary - - -
Part 581: Electromechanical componen
...