EN 62734:2015/A1:2019
(Amendment)Industrial networks - Wireless communication network and communication profiles - ISA 100.11a
Industrial networks - Wireless communication network and communication profiles - ISA 100.11a
Industrielle Kommunikationsnetze - Drahtlose Kommunikationsnetze und Kommunikationsprofile - ISA 100.11a
Réseaux industriels - Réseau de communication sans fil et profils de communication - ISA 100.11a
Industrijska omrežja - Brezžično komunikacijsko omrežje in komunikacijski profili - ISA 100.11a - Dopolnilo A1 (IEC 62734:2014/A1:2019)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62734:2015/A1:2020
01-marec-2020
Industrijska omrežja - Brezžično komunikacijsko omrežje in komunikacijski profili -
ISA 100.11a - Dopolnilo A1 (IEC 62734:2014/A1:2019)
Industrial networks - Wireless communication network and communication profiles - ISA
100.11a (IEC 62734:2014/A1:2019)
Industrielle Kommunikationsnetze - Drahtlose Kommunikationsnetze und
Kommunikationsprofile - ISA 100.11a (IEC 62734:2014/A1:2019)
Réseaux industriels - Réseau de communication sans fil et profils de communication -
ISA 100.11a (IEC 62734:2014/A1:2019)
Ta slovenski standard je istoveten z: EN 62734:2015/A1:2019
ICS:
25.040.01 Sistemi za avtomatizacijo v Industrial automation
industriji na splošno systems in general
33.040.40 Podatkovna komunikacijska Data communication
omrežja networks
35.100.01 Medsebojno povezovanje Open systems
odprtih sistemov na splošno interconnection in general
SIST EN 62734:2015/A1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 62734:2015/A1:2020
---------------------- Page: 2 ----------------------
SIST EN 62734:2015/A1:2020
EUROPEAN STANDARD EN 62734:2015/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2019
ICS 33.160.60; 33.170
English Version
Industrial networks - Wireless communication network and
communication profiles - ISA 100.11a
(IEC 62734:2014/A1:2019)
Réseaux industriels - Réseau de communication sans fil et Industrielle Kommunikationsnetze - Drahtlose
profils de communication - ISA 100.11a Kommunikationsnetze und Kommunikationsprofile - ISA
(IEC 62734:2014/A1:2019) 100.11a
(IEC 62734:2014/A1:2019)
This amendment A1 modifies the European Standard EN 62734:2015; it was approved by CENELEC on 2019-09-04. CENELEC members
are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the status of a
national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62734:2015/A1:2019 E
---------------------- Page: 3 ----------------------
SIST EN 62734:2015/A1:2020
EN 62734:2015/A1:2019 (E)
European foreword
The text of document 65C/965/FDIS, future IEC 62734/A1, prepared by SC 65C "Industrial networks"
of IEC/TC 65 "Industrial-process measurement, control and automation" was submitted to the IEC-
CENELEC parallel vote and approved by CENELEC as EN 62734:2015/A1:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-06-04
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-09-04
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62734:2014/A1:2019 was approved by CENELEC as a
European Standard without any modification.
2
---------------------- Page: 4 ----------------------
SIST EN 62734:2015/A1:2020
EN 62734:2015/A1:2019 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Pub
...
SLOVENSKI STANDARD
SIST EN 62734:2015/oprA1:2018
01-julij-2018
,QGXVWULMVNDRPUHåMD%UH]åLþQRNRPXQLNDFLMVNRRPUHåMHLQNRPXQLNDFLMVNLSURILOL
,6$D'RSROQLOR$
Industrial networks - Wireless communication network and communication profiles - ISA
100.11a
Industrielle Kommunikationsnetze - Drahtlose Kommunikationsnetze und
Kommunikationsprofile - ISA 100.11a
Réseaux industriels - Réseau de communication sans fil et profils de communication -
ISA 100.11a
Ta slovenski standard je istoveten z: EN 62734:2015/prA1:2018
ICS:
25.040.01 Sistemi za avtomatizacijo v Industrial automation
industriji na splošno systems in general
33.040.40 Podatkovna komunikacijska Data communication
omrežja networks
35.100.01 Medsebojno povezovanje Open systems
odprtih sistemov na splošno interconnection in general
SIST EN 62734:2015/oprA1:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 62734:2015/oprA1:2018
---------------------- Page: 2 ----------------------
SIST EN 62734:2015/oprA1:2018
65C/918/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 62734/AMD1 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2018-04-13 2018-07-06
SUPERSEDES DOCUMENTS:
65C/902/CD,65C/913/CC
IEC SC 65C : INDUSTRIAL NETWORKS
SECRETARIAT: SECRETARY:
France Ms Valérie DEMASSIEUX
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
SC 22G,TC 57,SC 121A
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
TITLE:
Industrial networks - Wireless communication network and communication profiles - ISA 100.11a
PROPOSED STABILITY DATE: 2022
NOTE FROM TC/SC OFFICERS:
NC comments on this CDV will be resolved either during the next SC65C/WG16 meeting currently
scheduled on October 8th-9th, 2018 in Geneva (Switzerland), or a web meeting
Copyright © 2018 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
---------------------- Page: 3 ----------------------
SIST EN 62734:2015/oprA1:2018
---------------------- Page: 4 ----------------------
SIST EN 62734:2015/oprA1:2018
– 2 – IEC CDV 62734:2014/AMD1© IEC 2018
1 FOREWORD
2 This amendment has been prepared by subcommittee 65C: Industrial networks, of IEC
3 technical committee 65: Industrial-process measurement, control and automation.
4 The text of this amendment is based on the following documents:
FDIS Report on voting
65C/XX/FDIS 65C/XX/RVD
5
6 Full information on the voting for the approval of this amendment can be found in the report
7 on voting indicated in the above table.
8 The committee has decided that the contents of this amendment and the base publication will
9 remain unchanged until the stability date indicated on the IEC web site under
10 "http://webstore.iec.ch" in the data related to the specific publication. At this date, the
11 publication will be
12 • reconfirmed,
13 • withdrawn,
14 • replaced by a revised edition, or
15 • amended.
16 The National Committees are requested to note that for this publication the stability date
17 is 2022.
18 THIS TEXT IS INCLUDED FOR THE INFORMATION OF THE NATIONAL COMMITTEES AND WILL BE
19 DELETED AT THE PUBLICATION STAGE.
20 _____________
21
22 Replace all references to “IEEE 802.15.4:2011” and “IEEE 802.15.4e” with
23 “IEEE 802.15.4:2015”.
24
25 0.3 Potentially relevant patents
26 In cell d) of the table providing coordinates for the Yokogawa Electric Corporation patent
27 holder, replace “Musashina-shi” with “Musashino-shi”.
28 6.2.7.2.7 Alert reporting management object attributes, alerts and methods
29 In Table 7, for Attribute 2 (Confirmation_Timeout_Device_Diagnostics), add valid value set of
30 -4 to 32767.
31 6.2.8.1.1 General
32 In Table 10, for DMO Attribute 8 (Tag_Name), add default value of null string
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.