EN 61347-2-7:2006
(Main)Lamp controlgear - Part 2-7: Particular requirements for d.c. supplied electronic ballasts for emergency lighting
Lamp controlgear - Part 2-7: Particular requirements for d.c. supplied electronic ballasts for emergency lighting
This part of IEC 61347 specifies particular safety requirements for d.c. supplied electronic ballasts for maintained and non-maintained emergency lighting purposes. It includes specific requirements for ballasts and control units for luminaires for emergency lighting as specified by IEC 60598-2-22.
Geräte für Lampen - Teil 2-7: Besondere Anforderungen an gleichstromversorgte elektronische Vorschaltgeräte für die Notbeleuchtung
Appareillages de lampes - Partie 2-7: Exigences particulières pour les ballasts électroniques alimentés en courant continu pour l'éclairage de secours
La présente partie de la CEI 61347 spécifie les exigences particulières de sécurité pour les ballasts électroniques alimentés en courant continu prévus pour l'éclairage de secours permanent ou non permanent. Cette norme comprend des exigences particulières pour les ballasts et pour les blocs de commande pour l'éclairage de secours spécifiés dans la CEI 60598-2-22.
Stikalne naprave za sijalke – 2-7. del: Posebne zahteve za enosmerno napajane elektronske predstikalne naprave za nujnostno razsvetljavo (IEC 61347-2-7:2006)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2007
1DGRPHãþD
SIST EN 61347-2-7:2002
Stikalne naprave za sijalke – 2-7. del: Posebne zahteve za enosmerno napajane
elektronske predstikalne naprave za nujnostno razsvetljavo (IEC 61347-2-7:2006)
Lamp controlgear -- Part 2-7: Particular requirements for d.c. supplied electronic ballasts
for emergency lighting
Geräte für Lampen -- Teil 2-7: Besondere Anforderungen an gleichstromversorgte
elektronische Vorschaltgeräte für die Notbeleuchtung
Appareillages de lampes -- Partie 2-7: Exigences particulières pour les ballasts
électroniques alimentés en courant continu pour l'éclairage de secours
Ta slovenski standard je istoveten z: EN 61347-2-7:2006
ICS:
29.130.01 Stikalne in krmilne naprave Switchgear and controlgear
na splošno in general
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 61347-2-7
NORME EUROPÉENNE
December 2006
EUROPÄISCHE NORM
ICS 29.140.99 Supersedes EN 61347-2-7:2001
English version
Lamp controlgear
Part 2-7: Particular requirements for d.c. supplied electronic ballasts
for emergency lighting
(IEC 61347-2-7:2006)
Appareillages de lampes Geräte für Lampen
Partie 2-7: Exigences particulières Teil 2-7: Besondere Anforderungen
pour les ballasts électroniques alimentés an gleichstromversorgte elektronische
en courant continu pour l'éclairage Vorschaltgeräte für die Notbeleuchtung
de secours (IEC 61347-2-7:2006)
(CEI 61347-2-7:2006)
This European Standard was approved by CENELEC on 2006-11-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61347-2-7:2006 E
Foreword
The text of document 34C/754/FDIS, future edition 2 of IEC 61347-2-7, prepared by SC 34C,
Auxiliaries for lamps, of IEC TC 34, Lamps and related equipment, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61347-2-7 on 2006-11-01.
This European Standard supersedes EN 61347-2-7:2001 + corrigendum July 2003.
This EN 61347-2-7:2006 provides technical updating to take account of the practical usage of this type
of control gear, alignment with the safety requirements for emergency lighting luminaires
(EN 60598-2-22), and advances in the field of lamp and control gear.
This standard shall be used in conjunction with EN 61347-1:2001.
In this standard, the following print types are used:
– requirements : in roman type;
– test specifications: in italic type;
– notes: in smaller roman type.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2007-08-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2009-11-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61347-2-7:2006 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 61347-2-7:2006
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
1) 2)
IEC 60081 - Double-capped fluorescent lamps - EN 60081 1998
Performance specifications
IEC 60598-2-22 1997 Luminaires EN 60598-2-22 1998
(mod) Part 2-22: Particular requirements - + corr. December 2005
Luminaires for emergency lighting
1) 2)
IEC 60901 - Single-capped fluorescent lamps - EN 60901 1996
Performance specifications
1) 2)
IEC 60921 - Ballasts for tubular fluorescent lamps - EN 60921 2004
Performance requirements
1) 2)
IEC 60929 - AC-supplied electronic ballasts for tubular EN 60929 2006
fluorescent lamps - Performance + corr. December 2006
requirements
1) 2)
IEC 61347-1 - Lamp controlgear EN 61347-1 2001
Part 1: General and safety requirements + corr. July 2003
1) 2)
IEC 61347-2-3 - Lamp controlgear EN 61347-2-3 2001
Part 2-3: Particular requirements for a.c. + corr. July 2003
supplied electronic ballasts for fluorescent
lamps
3)
IEC 61558-1 (mod) 1997 Safety of power transformers, power EN 61558-1 1997
supply units and similar + corr. April 2003
Part 1: General requirements and tests + A11 2003
IEC 61558-2-1 1997 Safety of power transformers, power EN 61558-2-1 1997
supply units and similar
Part 2-1: Particular requirements for
separating transformers for general use
1)
Undated reference.
2)
Valid edition at date of issue.
3)
EN 61558-1 is superseded by EN 61558-1:2005, which is based on IEC 61558-1:2005.
Publication Year Title EN/HD Year
IEC 61558-2-6 1997 Safety of power transformers, power EN 61558-2-6 1997
supply units and similar
Part 2-6: Particular requirements for safety
isolating transformers for general use
IEC 61558-2-17 1997 Safety of power transformers, power EN 61558-2-17 1997
supply units and similar
Part 2-17: Particular requirements for
transformers for switch mode power supplies
NORME CEI
INTERNATIONALE
IEC
61347-2-7
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2006-08
Appareillages de lampes –
Partie 2-7:
Exigences particulières pour les ballasts
électroniques alimentés en courant continu pour
l'éclairage de secours
Lamp controlgear –
Part 2-7:
Particular requirements for d.c. supplied
electronic ballasts for emergency lighting
IEC 2006 Droits de reproduction réservés Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
S
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue
61347-2-7 IEC:2006 – 3 –
CONTENTS
FOREWORD.7
INTRODUCTION.11
1 Scope.13
2 Normative references .13
3 Definitions .15
4 General requirements .19
5 General notes on tests .19
6 Classification.21
7 Marking .21
8 Protection against accidental contact with live parts .21
9 Terminals .23
10 Provisions for earthing.23
11 Moisture resistance and insulation.23
12 Electric strength .23
13 Thermal endurance test for windings .23
14 Pulse voltages for ballast for central battery systems .23
15 Starting conditions.23
16 Lamp current and ballast lumen factor (BLF) .25
17 Supply current .25
18 Maximum current in any lead (with cathode preheating) .27
19 Lamp operating current waveforms.27
20 Functional safety (EBLF) .27
21 Change over operation .29
22 Recharging device.29
23 Protection against excessive discharge .33
24 Indicator .33
25 Remote control .33
26 Temperature cycling test and endurance test .33
27 Polarity reversal .35
28 Fault conditions .35
29 Construction .35
30 Creepage distances and clearances .35
31 Screws, current-carrying parts and connections.35
32 Resistance to heat, fire and tracking.35
33 Resistance to corrosion .35
61347-2-7 IEC:2006 – 5 –
Annex A (normative) Test to establish whether a conductive part is a live part, which
may cause an electric shock .39
Annex B (normative) Particular requirements for thermally protected lamp control gear .39
Annex C (normative) Particular requirements for electronic lamp control gear with
means of protection against overheating.39
Annex D (normative) Requirements for carrying out the heating test of thermally
protected lamp control gear .39
Annex E (normative) Use of constant S other than 4 500 in t tests .41
w
Annex F (normative) Draught-proof enclosure.41
Annex G (normative) Explanation of the derivation of the values of pulse voltages .41
Annex H (normative) Tests .41
Annex I (normative) Batteries for emergency lighting luminaires .41
Annex J (informative) Rest mode and inhibition mode facilities .43
Figure 1 – Suitable circuits for the measurement of lamp current and luminous flux .37
Table 1 – Pulse voltages.23
Tab
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.