iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 61340-5-3:2015

(Main)

Electrostatics - Part 5-3: Protection of electronic devices from electrostatic phenomena - Properties and requirements classification for packaging intended for electrostatic discharge sensitive devices

Electrostatics - Part 5-3: Protection of electronic devices from electrostatic phenomena - Properties and requirements classification for packaging intended for electrostatic discharge sensitive devices

IEC 61340-5-3:2015 defines the ESD protective packaging properties needed to protect electrostatic discharge sensitive devices (ESDS) through all phases of production, rework/maintenance, transport and storage. Test methods are referenced to evaluate packaging and packaging materials for these product and material properties. Performance limits are provided. This standard does not address protection from electromagnetic interference (EMI), electromagnetic pulsing (EMP) or protection of volatile materials. This edition includes the following significant technical changes with respect to the previous edition: a) removal of all references to ANSI/ESD STM11.13, replaced by normative reference IEC 61340-4-10; b) additional notes added to Table 1; c) addition of a new Table 3 related to the "ESD classification symbol" and the "primary function code".

Elektrostatik - Teil 5-3: Schutz von elektronischen Bauelementen gegen elektrostatische Phänomene - Eigenschaften und Anforderungen für die Klassifizierung von Verpackungen, welche für Bauelemente verwendet werden, die gegen elektrostatische Entladungen empfindlich sind

Électrostatique - Partie 5-3: Protection des dispositifs électroniques contre les phénomènes électrostatiques - Classification des propriétés et des exigences relatives à l'emballage destiné aux dispositifs sensibles aux décharges électrostatiques

IEC 61340-5-3:2015 définit les propriétés des emballages de protection contre les ESD nécessaires pour protéger les dispositifs sensibles aux décharges électrostatiques (ESDS) pendant toutes les phases de production, réusinage/maintenance, de transport et de stockage. Les méthodes d'essai sont référencées pour évaluer les emballages et les matériaux d'emballages concernant les propriétés de ces produits et matériaux. Des limites de performance sont données. La présente norme ne traite pas de la protection contre le brouillage électromagnétique (EMI, Electromagnetic Interference), le brouillage radioélectrique (RFI, Radio Frequency Interference), les impulsions électromagnétiques (IEM) ni de la protection des matériaux volatils. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) suppression de toutes les références à l'ANSI/ESD STM11.13, remplacée par la référence normative IEC 61340-4-10; b) notes supplémentaires ajoutées dans le Tableau 1; c) ajout d'un Tableau supplémentaire 3 lié au "symbole de classification ESD" et au "code de fonction primaire".

Elektrostatika - 5-3. del: Zaščita elektronskih naprav pred elektrostatičnimi pojavi - Lastnosti in klasifikacija zahtev za embalažo naprav, ki so občutljive za elektrostatične razelektritve

Ta del standarda IEC 61340 opredeljuje lastnosti, ki jih mora imeti embalaža za zaščito pred elektrostatično razelektritvijo, da zaščiti naprave, občutljive za elektrostatično razelektritev (ESD), v vseh fazah izdelave, popravila/vzdrževanja, prevoza in skladiščenja. Preskusne metode so navedene za ocenjevanje embalaže in materialov za embalažo teh izdelkov ter lastnosti materialov. Podane so omejitve delovanja. Ta standard ne obravnava zaščite pred elektromagnetnimi motnjami (EMI) in elektromagnetnimi sunki (EMP) ali zaščite vnetljivih materialov.

General Information

Status
Published
Publication Date
08-Oct-2015
Withdrawal Date
19-Aug-2018
ICS
17.220.99 - Other standards related to electricity and magnetism
29.020 - Electrical engineering in general
Technical Committee
CLC/SR 101 - Electrostatics
Drafting Committee
IEC/TC 101 - IEC_TC_101
Current Stage
6060 - Document made available - Publishing
Start Date
09-Oct-2015
Completion Date
09-Oct-2015
Ref Project
SIST EN 61340-5-3:2015 - Electrostatics - Part 5-3: Protection of electronic devices from electrostatic phenomena - Properties and requirements classification for packaging intended for electrostatic discharge sensitive devices

Relations

Replaces
EN 61340-5-3:2010 - Electrostatics - Part 5-3: Protection of electronic devices from electrostatic phenomena - Properties and requirements classifications for packaging intended for electrostatic discharge sensitive devices
Effective Date
13-Oct-2015
Replaced By
EN IEC 61340-5-3:2022 - Electrostatics - Part 5-3: Protection of electronic devices from electrostatic phenomena - Properties and requirements classification for packaging intended for electrostatic discharge sensitive devices
Effective Date
12-Jan-2021

Buy Standard

EN 61340-5-3:2015EN 61340-5-3:2015
PreviousNext
Standard
EN 61340-5-3:2015
English language
24 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61340-5-3:2015
01-december-2015
1DGRPHãþD
SIST EN 61340-5-3:2010
(OHNWURVWDWLNDGHO=DãþLWDHOHNWURQVNLKQDSUDYSUHGHOHNWURVWDWLþQLPLSRMDYL
/DVWQRVWLLQNODVLILNDFLMD]DKWHY]DHPEDODåRQDSUDYNLVRREþXWOMLYH]D
HOHNWURVWDWLþQHUD]HOHNWULWYH
Electrostatics - Part 5-3: Protection of electronic devices from electrostatic phenomena -
Properties and requirements classification for packaging intended for electrostatic
discharge sensitive devices
Électrostatique - Partie 5-3: Protection des dispositifs électroniques contre les
phénomènes électrostatiques - Classification des propriétés et des exigences relatives à
l'emballage destiné aux dispositifs sensibles aux décharges électrostatiques
Ta slovenski standard je istoveten z: EN 61340-5-3:2015
ICS:
17.220.99 Drugi standardi v zvezi z Other standards related to
elektriko in magnetizmom electricity and magnetism
SIST EN 61340-5-3:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61340-5-3:2015

---------------------- Page: 2 ----------------------

SIST EN 61340-5-3:2015


EUROPEAN STANDARD EN 61340-5-3

NORME EUROPÉENNE

EUROPÄISCHE NORM
October 2015
ICS 17.220.99; 29.020 Supersedes EN 61340-5-3:2010
English Version
Electrostatics - Part 5-3: Protection of electronic devices from
electrostatic phenomena - Properties and requirements
classification for packaging intended for electrostatic discharge
sensitive devices
(IEC 61340-5-3:2015)
Électrostatique - Partie 5-3: Protection des dispositifs Elektrostatik - Teil 5-3: Schutz von elektronischen
électroniques contre les phénomènes électrostatiques - Bauelementen gegen elektrostatische Phänomene -
Classification des propriétés et des exigences relatives à Eigenschaften und Anforderungen für die Klassifizierung
l'emballage destiné aux dispositifs sensibles aux décharges von Verpackungen, welche für Bauelemente verwendet
électrostatiques werden, die gegen elektrostatische Entladungen
(IEC 61340-5-3:2015) empfindlich sind
(IEC 61340-5-3:2015)
This European Standard was approved by CENELEC on 2015-08-20. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 61340-5-3:2015 E

---------------------- Page: 3 ----------------------

SIST EN 61340-5-3:2015
EN 61340-5-3:2015
European foreword
The text of document 101/428/CDV, future edition 2 of IEC 61340-5-3, prepared by IEC/TC 101
"Electrostatics" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 61340-5-3:2015.
The following dates are fixed:
(dop) 2016-05-20
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2018-08-20
• latest date by which the national standards conflicting with
the document have to be withdrawn

This document supersedes EN 61340-5-3:2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61340-5-3:2015 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61340-5-1 NOTE Harmonized as EN 61340-5-1.
IEC 60749-26 NOTE Harmonized as EN 60749-26.
2
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN 61340-2-3:2016/AC:2023-08(Corrigendum)
Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation
SIST EN 61340-2-3:2016/AC:2023
  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61340-2-1:2015/A1:2022(Amendment)
Electrostatics - Part 2-1: Measurement methods - Ability of materials and products to dissipate static electric charge
SIST EN 61340-2-1:2016/A1:2022

This part of IEC 61340 describes test methods for measuring the rate of dissipation of static charge of insulating and static materials and products. It includes a generic description of test methods and detailed test procedures for specific applications. The two test methods for measuring charge decay time, one using corona charging and one using a charged metal plate are different and might not give equivalent results. Nevertheless, each method has a range of applications for which it is best suited. The corona charging method is suitable for evaluating the ability of materials, for example textiles, packaging, etc., to dissipate charge from their own surfaces. The charged metal plate method is suitable for evaluating the ability of materials and objects such as gloves, finger cots, hand tools, etc. to dissipate charge from conductive objects placed on or in contact with them. The charged plate method might not be suitable for evaluating the ability of materials to dissipate charge from their own surfaces. In addition to its general application, this horizontal standard is also intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 108. One of the responsibilities of a technical committee is, wherever applicable, to make use of horizontal standards in the preparation of its publications. The contents of this horizontal standard shall not apply unless specifically referred to or included in the relevant publications.

  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61340-5-3:2022(Main)
Electrostatics - Part 5-3: Protection of electronic devices from electrostatic phenomena - Properties and requirements classification for packaging intended for electrostatic discharge sensitive devices
SIST EN IEC 61340-5-3:2022

This part of IEC 61340 defines the ESD protective packaging properties needed to protect ESD sensitive devices (ESDS) through all phases of production, rework/maintenance, transport and storage. Test methods are referenced to evaluate packaging and packaging materials for these product and material properties. Performance limits are provided. This standard does not address protection from electromagnetic interference (EMI), electromagnetic pulsing (EMP) or protection of electrically initiated explosive materials or devices.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61340-6-1:2018(Main)
Electrostatics - Part 6-1: Electrostatic control for healthcare - General requirements for facilities
SIST EN IEC 61340-6-1:2019

IEC 61340-6-1:2018 applies to facilities that provide healthcare including hospitals, care centres and clinics. This document provides technical requirements and recommendations for controlling electrostatic phenomena in healthcare facilities, which includes requirements for equipment, materials, and products used to control static electricity. The requirements of this document do not apply to medical electrical equipment specified in IEC 60601-1 and in vitro diagnostic (IVD) medical equipment specified in IEC 61010‑2‑101.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61340-4-4:2018(Main)
Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC)
SIST EN IEC 61340-4-4:2018

NEW!IEC 61340-4-4:2018 is available as IEC 61340-4-4:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61340-4-4:2018 specifies requirements for flexible intermediate bulk containers (FIBC) between 0,25 m3 and 3 m3 in volume, intended for use in hazardous explosive atmospheres. The explosive atmosphere can be created by the contents in the FIBC or can exist outside the FIBC. The requirements include: – classification and labelling of FIBC; – classification of inner liners; – specification of test methods for each type of FIBC, inner liner, labels and document pockets; – design and performance requirements for FIBC, inner liners, labels and document pockets; – safe use of FIBC (including those with inner liners) within different zones defined for explosion endangered environments, described for areas where combustible dusts are, or can be, present (IEC 60079-10-2), and for explosive gas atmospheres (IEC 60079-10-1); – procedures for type qualification and certification of FIBC, including the safe use of inner liners. This third edition cancels and replaces the second edition, published in 2012, and Amendment 1:2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) in light of experimental evidence, the maximum resistance to ground limit for Type C FIBC, and corresponding resistance limits for inner liners used in Type C FIBC has been increased from 10 M ohms to 100 M ohms; b) the classification of Type L1 inner liners has been revised and extended to include Type L1C inner liners made from multi-layer materials with a conductive internal layer; c) a labelling requirement to include a reference to IEC TS 60079-32-1 for guidance on earthing has been added.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61340-4-3:2018(Main)
Electrostatics - Part 4-3: Standard test methods for specific applications - Footwear
SIST EN IEC 61340-4-3:2018

IEC 61340-4-3:2017 describes a test method for determining the electrical resistance of footwear (shoes, slippers or booties) used in the control of electrostatic potential on people. This document is suitable for use by the manufacturer of footwear as well as the end user. A method for measuring the electrical resistance of footwear alone is described and serves as a qualification test or an acceptance test for new footwear, or as a periodic test of in-use footwear. Although this document does not include requirements for personal safety, footwear used within the scope of this document in all places of work is regulated by the relevant local statutory requirements regarding the health and safety of all persons. Insulating footwear is not included within the scope of this document although the electrical resistance measurement techniques can be applicable. This edition includes the following significant technical changes with respect to the previous edition: a) classification of footwear as electrostatic conductive or electrostatic dissipative has been removed – classification is not specified; b) environmental classes for laboratory testing have been removed – one set of conditions for pre-conditioning, conditioning and testing is specified; c) reference to IEC 61340-2-3 for measuring the resistance of the counter electrode inserted inside footwear has been removed.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61340-2-3:2016(Main)
Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation
SIST EN 61340-2-3:2016

Describes test methods for the determination of the electrical resistance and resistivity of solid materials in the range from 10K Ohm to 1T Ohm used to avoid electrostatic charge accumulation. It takes account of existing IEC/ISO standards and other published information, and gives recommendations and guidelines on the appropriate method.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61340-4-9:2016(Main)
Electrostatics - Part 4-9: Standard test methods for specific applications - Garments
SIST EN 61340-4-9:2016

IEC 61340-4-9:2016 provides test methods for evaluating the electrical resistance of garments that contain surface conductive or dissipative components or materials used in the electronics industry for the control of electrostatic discharge. This standard defines procedures for measuring electrical resistance, including a system resistance test for garments that provide a ground path for personnel. This edition includes the following significant technical changes with respect to the previous edition: a) classification of three types of garments - static control garments, - groundable static control garments, and - groundable static control garment system; b) additional measurements according to the the garment type including cuff measurements, panel to groundable point, testing with a person in the garment system; c) sleeve to sleeve measurements allowed with probes or by hanging; d) additional recommended values for new garment types as set out in Annex A.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61340-2-1:2015(Main)
Electrostatics - Part 2-1: Measurement methods - Ability of materials and products to dissipate static electric charge
SIST EN 61340-2-1:2016

IEC 61340-2-1:2015 describes test methods for measuring the rate of dissipation of static charge of insulating and static dissipative materials and products. It includes a generic description of test methods and detailed test procedures for specific applications. The two test methods for measuring charge decay time, one using corona charging and one using a charged metal plate are different and may not give equivalent results. Nevertheless, each method has a range of applications for which it is best suited. The corona charging method is suitable for evaluating the ability of materials, e.g. textiles, packaging, etc., to dissipate charge from their own surfaces. The charged metal plate method is suitable for evaluating the ability of materials and objects such as gloves, finger cots, hand tools, etc. to dissipate charge from conductive objects placed on or in contact with them. The charged plate method may not be suitable for evaluating the ability of materials to dissipate charge from their own surfaces. In addition to its general application, this horizontal standard is also intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 108. This edition includes the following significant technical changes with respect to the previous edition: a) the first edition supported requirements in IEC TR 61340-5-1, but with the revision of IEC TR 61340-5-1 into an International Standard, this support is no longer required; references to IEC 61340-5-1 have been removed; b) the introduction gives additional information on when charge decay time measurements are appropriate, and the applications for which each of the two test methods are best suited; c) procedures for performance verification of measuring instruments for the corona charging method have been added. IEC 61340-2-1:2015 has the status of a horizontal standard in accordance with IEC Guide 108.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61340-4-6:2015(Main)
Electrostatics - Part 4-6: Standard test methods for specific applications - Wrist straps
SIST EN 61340-4-6:2015

IEC 61340-4-6:2015 provides electrical and mechanical test methods and performance limits for evaluation, acceptance and periodic verification testing of wrist straps. This standard is intended for testing wrist straps and wrist strap systems used for the grounding of personnel engaged in working with ESD sensitive assemblies and devices. It does not address constant monitoring systems. This edition includes the following significant technical changes with respect to the previous edition: a) editorial comments made during the review of the first edition were reviewed and incorporated where appropriate; b) several changes were made to update the Figures and improve the presentation of metric measurements (Imperial measurements have been removed); c) the option of using an integrated checker for wrist strap system continuity testing has been added; d) the evaluation and acceptance limit for wrist strap resistance has been changed so as to harmonize with IEC 61340-5-1.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day