iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

HD 604 S1:1994

(Main)

0,6/1 kV and 1,9/3,3 kV power cables with special fire performance for use in power stations

0,6/1 kV and 1,9/3,3 kV power cables with special fire performance for use in power stations

Hd 604 applies to rigid and flexible conductor cables for fixed installations having a rated voltage Uo/U of 0.6/1 kV or 1.9/3.3 kV. The insulation and sheaths may be mainly intended for use in power generating plants and sub-stations. All cables have specific fire performance requirements.

Starkstromkabel mit besonderen Eigenschaften im Falle eines Brandes für Kraftwerke und einer Nennspannung von 0,6/1 kV und 1,9/3,3 kV

Câbles d'énergie 0,6/1 kV et 1,9/3,3 kV ayant un comportement au feu particulier et destinés aux centrales électriques

Elektroenergetski kabli za napetosti 0,6/1 kV in 1,9/3,3 kV s posebnimi ognjevzdržnimi lastnostmi za uporabo v elektrarnah

General Information

Status
Published
Publication Date
18-Aug-1994
Withdrawal Date
30-Nov-1994
ICS
13.220.40 - Ignitability and burning behaviour of materials and products
29.060.20 - Cables
Technical Committee
CLC/TC 20 - Electric cables
Drafting Committee
IEC/TC 20 - IEC_TC_20
Parallel Committee
IEC/TC 20 - IEC_TC_20
Current Stage
6060 - Document made available - Publishing
Start Date
19-Aug-1994
Completion Date
19-Aug-1994
Directive
2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
2014/53/EU - Directive 2014/53/EU of The European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC
73/23/EEC - Electrical equipment designed for use within certain voltage limits
Ref Project
SIST HD 604 S1:1998 - 0,6/1 kV and 1,9/3,3 kV power cables with special fire performance for use in power stations

Relations

Amended By
HD 604 S1:1994/A3:2005 - 0,6/1 kV and 1,9/3,3 kV power cables with special fire performance for use in power stations
Effective Date
29-Jan-2023
Amended By
HD 604 S1:1994/A1:1997 - 0,6/1 kV and 1,9/3,3 kV power cables with special fire performance for use in power stations
Effective Date
29-Jan-2023
Amended By
HD 604 S1:1994/A2:2002 - 0,6/1 kV and 1,9/3,3 kV power cables with special fire performance for use in power stations
Effective Date
29-Jan-2023
Revised
prHD 604-S2 - 0,6/1,0 kV power cables with special fire performance for use in power stations and similar installations
Effective Date
24-Sep-2019

Buy Standard

HD 604 S1:1998 - Strani se ne ujemajo!HD 604 S1:1998 - Strani se ne ujemajo!
PreviousNext
Standardization document
HD 604 S1:1998 - Strani se ne ujemajo!
English language
550 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST HD 604 S1:1998
01-februar-1998
Elektroenergetski kabli za napetosti 0,6/1 kV in 1,9/3,3 kV s posebnimi
ognjevzdržnimi lastnostmi za uporabo v elektrarnah
0,6/1 kV and 1,9/3,3 kV power cables with special fire performance for use in power
stations
Starkstromkabel mit besonderen Eigenschaften im Falle eines Brandes für Kraftwerke
und einer Nennspannung von 0,6/1 kV und 1,9/3,3 kV
Câbles d'énergie 0,6/1 kV et 1,9/3,3 kV ayant un comportement au feu particulier et
destinés aux centrales électriques
Ta slovenski standard je istoveten z: HD 604 S1:1994
ICS:
13.220.40 Sposobnost vžiga in Ignitability and burning
obnašanje materialov in behaviour of materials and
proizvodov pri gorenju products
29.060.20 Kabli Cables
SIST HD 604 S1:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 2 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 3 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 4 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 5 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 6 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 7 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 8 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 9 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 10 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 11 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 12 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 13 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 14 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 15 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 16 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 17 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 18 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 19 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 20 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 21 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 22 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 23 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 24 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 25 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 26 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 27 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 28 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 29 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 30 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 31 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 32 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 33 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 34 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 35 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 36 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 37 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 38 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 39 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 40 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 41 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 42 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 43 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 44 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 45 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 46 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 47 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 48 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 49 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 50 ----------------------

SIST HD 604 S1:1998

---------------------- Page: 51 ----------------------

SIST HD 604 S1:19
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN 50576:2022(Main)
Electric cables - Extended application of test results for reaction to fire
SIST EN 50576:2023

This document describes the procedure and rules for extended application of results of tests carried out according to the test methods described in EN 50399, EN 60332 1 2 and EN 61034 2. The EXAP rules described apply to EN 50399 test results used for classification according to EN 13501 6 in classes B2ca, Cca and Dca, additional smoke production classes s1, s2 and s3 and flaming droplets/particles, to EN 60332 1 2 test results used for classification in classes B2ca, Cca, Dca and Eca and to EN 61034 2 test results used for classification in classes s1a and s1b. No EXAP procedure and rules have been developed in respect to the results of tests carried out according to the test method described in EN 60754 2. As the parameters (pH and conductivity) for each cable in a family are determined based upon calculation using material test results, this is considered as a matter of direct application. Material test results taken from any one sample of finished cable from a family are sufficient to calculate the parameters for each cable in the family. Cables with a diameter of 5,0 mm or less are expected to be tested as bundles according to EN 50399. Cables with a diameter of less than or equal to 5,0 mm are included in the specific and general EXAP rules for single core unsheathed power cables only. The rules apply to circular and non-circular cables provided that they fall within the scope of the relevant test method. A specific EXAP rule has been developed for any of the types of electric cable families as defined in this document. A general EXAP rule has been developed for all electric cable families unless otherwise stated elsewhere in this document. NOTE 1 Multicore power cables are sometimes referred to as control cables with a rated voltage but for the purposes of this document are considered as power cables. For multipair, multitriple and multiquad control cables, either the general EXAP rule or the specific EXAP rule for power cables or the specific EXAP rule for communication cables can be applied. The use of the specific EXAP rule gives benefit in the lower number of cables to be tested for a range of cable constructions (product family). An EXAP is only possible when cables belong to a family as defined in this document. NOTE 2 For the purposes of this document, the term "electric cables" also covers optical fibre cables.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50399:2022(Main)
Common test methods for cables under fire conditions - Heat release and smoke production measurement on cables during flame spread test - Test apparatus, procedures, results
SIST EN 50399:2022

This document specifies the apparatus and methods of test for the assessment of vertical flame spread, heat release, smoke production and occurrence of flaming droplets/particles of vertically mounted electric cables under defined conditions. NOTE For the purpose of this document, the term “electric cable” covers all power, control and communication cables, including optical fibre cables and hybrid cables used for the conveyance of energy and/or signals. This document details the apparatus for the fire propagation testing and the arrangement and calibration of the instrumentation to be installed to measure the heat release and the smoke production during the test. The combustion gases are collected in a hood above the test chamber and conveyed through an exhaust system, which allows the measurement of heat release rate and smoke production. Test procedures to be used for type approval testing for classification of cables in classes [2, 7] B1ca, B2ca, Cca and Dca are given. Cable installation on the test ladder and the volume of air passing through the chamber are in accordance with the Commission Decision 2006/751/EC [6], which is reflected in the requirements of this document.

  • Standard
    85 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60332-1-2:2004/A12:2020(Amendment)
Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame
SIST EN 60332-1-2:2005/A12:2021

This standard specifies the procedure for testing the resistance to vertical flame propagation for a single vertical electrical insulated conductor or cable, or optical fibre cable, under fire conditions.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60332-3-10:2018/A11:2020(Amendment)
Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus
SIST EN IEC 60332-3-10:2018/A11:2021

EN 60332-3-10:2018 details the apparatus and its arrangement and calibration for methods of test for the assessment of vertical flame spread of vertically mounted bunched wires or cables, electrical or optical, under defined conditions.

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50306-4:2020(Main)
Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 4: Multicore and multipair screened or not screened sheathed cables
SIST EN 50306-4:2020

This document specifies requirements for, and constructions and dimensions of, multicore and multipair cables rated voltage U0/U: 300/500 V, of the following types: - unscreened, sheathed for either exposed or protected wiring (0,5 mm2 to 2,5 mm2, number of cores from 2 to 48); - screened, sheathed for either exposed or protected wiring (0,5 mm2 to 2,5 mm2, number of cores from 2 to 8); - unscreened, sheathed for either exposed or protected wiring (0,5 mm2 to 1,5 mm2, number of screened pairs of cores from 2 to 7). - screened, sheathed for either exposed or protected wiring (0,5 mm2 to 1,5 mm2, number of unscreened pairs of cores from 2 to 7). All cables have stranded tinned copper conductors, halogen-free, thin wall thickness insulation and standard wall thickness sheath. Cable types are specified for use in exposed situations (Class E), and for protected situations (Class P). They are for use in railway rolling stock as fixed wiring or wiring where limited flexing in operation is encountered. These cables are rated for occasional thermal stresses causing ageing equivalent to continuous operational life at a temperature of 90 °C. For standard cables this is determined by the acceptance test defined in EN 50305, using accelerated long-term (5 000 h) thermal ageing indicating a 110 °C/20 000 h temperature index. If the customer were to require lifetime predictions this would be demonstrated based on the temperature index of the product as supplied by the manufacturer. The maximum temperature for short circuit conditions is 160 °C based on duration of 5 s. Under fire conditions the cables exhibit special performance characteristics in respect of maximum permissible flame propagation (flame spread) and maximum permissible emission of smoke and toxic gases. These requirements are specified to permit the cables to satisfy Hazard Level 3 of EN 45545 1 and EN 45545 2. EN 50306 4:2020 is expected to be used in conjunction with EN 50306-1:2020, General requirements, EN 50306-2:2020, Single core cables, and EN 50306-3:2020, Single core and multicore cables.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50306-1:2020(Main)
Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 1: General requirements
SIST EN 50306-1:2020

EN 50306-1 specifies the general requirements applicable to the cables given in EN 50306-2, EN 50306-3 and EN 50306-4. It includes the detailed requirements for S2 sheathing materials and other components called up in the separate parts. NOTE Detailed requirements for insulation systems are given in EN 50306-2. In particular, EN 50306-1 specifies those requirements relating to fire safety which enable the cables to satisfy Hazard Level 3 of EN 45545-1 and EN 45545-2. These cables are rated for occasional thermal stresses which causes ageing equivalent to continuous operational life at a temperature of 105 °C or 90 °C. For standard cables, this is determined by the acceptance test defined in EN 50305, using accelerated long-term (5 000 h) thermal ageing indicating a 125 °C or 110 °C /20 000 h temperature index. If the customer were to require lifetime predictions, this would be demonstrated based on the temperature index of the product as supplied by the manufacturer. The maximum temperature for short circuit conditions is 160 °C based on duration of 5 s. EN 50306-1 is expected to be used in conjunction with one or more of the other parts of EN 50306.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50306-3:2020(Main)
Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 3: Single core and multicore cables screened and thin wall sheathed
SIST EN 50306-3:2020

This document specifies requirements for, and constructions and dimensions of, multicore cables, rated voltage U0/ U = 300/500 V, of the following type: Screened (0,5 mm2 to 2,5 mm2, number of cores from 1 to 8). All cables have stranded tinned copper conductors, and thin wall thickness, halogen-free, insulation and sheath. They are for use in railway rolling stock as fixed wiring or wiring where limited flexing in operation is encountered. These cables are rated for occasional thermal stresses causing ageing equivalent to continuous operational life at a temperature of 90 °C. For standard cables, this is determined by the acceptance test defined in EN 50305, using accelerated long-term (5 000 h) thermal ageing indicating a 110 °C/20 000 h temperature index. If the customer were to require lifetime predictions this would be demonstrated based on the temperature index of the product as supplied by the manufacturer. The maximum temperature for short circuit conditions is 160 °C based on duration of 5 s. Under fire conditions, the cables exhibit special performance characteristics in respect of maximum permissible flame propagation (flame spread) and maximum permissible emission of smoke and toxic gases. These requirements are specified to permit the cables to satisfy Hazard Level 3 of EN 45545 1 and EN 45545 2. EN 50306 3:2020 is expected to be used in conjunction with EN 50306 1:2020, General Requirements, and EN 50306 2:2020, Single core cables.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50306-2:2020(Main)
Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 2: Single core cables
SIST EN 50306-2:2020

This document specifies requirements for, and constructions and dimensions of, single core cables, rated voltage U0 / U = 300 /300 V, of the following type: Unscreened (0,5 mm2 to 2,5 mm2 single core) These cables are rated for occasional thermal stresses causing ageing equivalent to continuous operational life at a temperature of 105 °C. For standard cables, this is determined by the acceptance test defined in EN 50305, using accelerated long-term (5 000 h) thermal ageing indicating a 125 °C/20 000 h temperature index. If the customer were to require lifetime predictions, this would be demonstrated based on the temperature index of the product as supplied by the manufacturer. The maximum temperature for short circuit conditions is 160 °C based on duration of 5 s. Under fire conditions the cables exhibit special performance characteristics in respect of maximum permissible flame propagation (flame spread) and maximum permissible emission of smoke and toxic gases. These requirements are specified to permit the cables to satisfy Hazard Level 3 of EN 45545 1 and EN 45545 2. EN 50306-2:2020 is expected to be used in conjunction with EN 50306-1:2020, General requirements.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60754-1:2014/A1:2020(Amendment)
Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content
SIST EN 60754-1:2014/A1:2020

2019-02-04 - GEM - link to LVD removed - no hEN  -  no assessment
2019-02-01 PeC: removed from citation under the LVD, TC confirmed it is a test method standard

  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60754-2:2014/A1:2020(Amendment)
Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity
SIST EN 60754-2:2014/A1:2020

2019-02-04 - GEM - linkto LVD removed - no hEN  -  no assessment
2019-02-01 PeC: removed from citation under the LVD, TC confirmed it is a test method standard

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day