Expression of performance of fluorometric oxygen analyzers in liquid media

IEC 62703:2013 specifies the general aspects in the terminology and definitions related to the performance of fluorometric oxygen analyzers used for the continuous determination of dissolved oxygen partial pressure or concentration in liquid media; unifies methods used in making and verifying statements on the functional performance of such analyzers; specifies which tests should be performed in order to determine the functional performance and how such tests should be carried out and provides basic documents to support the application of standards of quality assurance within ISO 9001.

Angabe zum Betriebsverhalten von fluorometrischen Sauerstoffanalysatoren in flüssigen Medien

Expression des performances des analyseurs d'oxygène fluormétriques en milieu liquide

La CEI 62703:2013 spécifie les aspects généraux de la terminologie et des définitions liées aux performances des analyseurs d'oxygène fluorométriques utilisés pour la détermination continue de la pression ou de la concentration partielle d'oxygène dissous en milieu liquide; unifie les méthodes utilisées en fournissant et en vérifiant les indications relatives aux performances fonctionnelles de ces analyseurs; spécifie les essais qu'il convient d'effectuer afin de déterminer les performances fonctionnelles et la manière dont il convient de réaliser ces essais et stipule des documents de base pour supporter l'usage des normes d'assurance de la qualité de l'ISO 9001.

Izražanje zmogljivosti fluorometričnih analizatorjev kisika v tekočinah (IEC 62703:2013)

Ta mednarodni standard se uporablja za fluorometrične analizatorje kisika, ki se uporabljajo za neprekinjeno določanje delnega tlaka ali koncentracije raztopljenega kisika. Velja za fluorometrične analizatorje kisika, primerne za uporabo v tekočinah, ki vsebujejo vodo, ultra čistih vodah, sladki ali pitni vodi, morski vodi ali drugih vodnih raztopinah, industrijskih ali gospodinjskih odpadnih vodah iz vodnih teles (npr. jezera, reke, ustja) ter za industrijske procesne tokove in procesne tekočine. Čeprav se fluorometrični analizatorji kisika načeloma uporabljajo v plinastih fazah, izražanje delovanja v plinasti fazi ni predmet tega standarda. Senzorska enota fluorometričnega analizatorja kisika, ki je v stiku z medijem za merjenje, vsebuje luminofor v membrani iz polimera, ki je prepustna za kisik, ali v drugih za kisik prepustnih materialih (ali substratih). Ta standard določa terminologijo, definicije, zahteve za navedbe proizvajalcev in preskuse za fluorometrične analizatorje kisika. Ta standard je v skladu s splošnimi načeli iz skupine standardov IEC 60359 in IEC 60770. Ta standard se uporablja za analizatorje, ki so določeni za stalno namestitev na katerem koli mestu (znotraj ali zunaj) z uporabo merilne tehnike s povezavo. Varnostne zahteve so obravnavane v standardu IEC 61010-1. Standardni obseg signalov analognega enosmernega toka, ki se uporabljajo v sistemih za nadzor procesa, je obravnavan v standardu IEC 60381-1. Specifikacije za vrednosti za preskušanje vplivnih veličin so na voljo v skupini standardov IEC 60654. Zahteve za dokumentacijo, ki jo je treba priložiti instrumentom, so obravnavane v standardu IEC 61187. Zahteve za splošna načela glede veličin, enot in simbolov, so obravnavane v standardu ISO 80000-1:2009. Namen standarda IEC 62703 je: – določiti splošne vidike v terminologiji in definicijah v zvezi z delovanjem fluorometričnih analizatorjev kisika, ki se uporabljajo za neprekinjeno določanje delnega tlaka ali koncentracije kisika v tekočih medijih; – poenotiti metode, ki se uporabljajo pri ustvarjanju in preverjanju navedb o funkcijski zmogljivosti takšnih analizatorjev; – določiti, katere preskuse je treba opraviti, da se določi funkcijska zmogljivost, in kako jih je treba opraviti; – zagotoviti osnovne dokumente za podporo uporabe standardov za zagotavljanje kakovosti v sklopu standarda ISO 9001.

General Information

Status
Published
Publication Date
29-Aug-2013
Withdrawal Date
31-Jul-2016
Current Stage
6060 - Document made available - Publishing
Start Date
30-Aug-2013
Completion Date
30-Aug-2013

Buy Standard

Standard
EN 62703:2013
English language
45 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62703:2013
01-oktober-2013
,]UDåDQMH]PRJOMLYRVWLIOXRURPHWULþQLKDQDOL]DWRUMHYNLVLNDYWHNRþLQDK ,(&

Expression of performance of fluorometric oxygen analyzers in liquid media (IEC
62703:2013)
Angabe zum Betriebsverhalten von fluorometrischen Sauerstoffanalysatoren in flüssigen
Medien (IEC 62703:2013)
Expression des performances des analyseurs d'oxygène fluormétriques en milieu liquide
(IEC 62703:2013)
Ta slovenski standard je istoveten z: EN 62703:2013
ICS:
17.020 Meroslovje in merjenje na Metrology and measurement
splošno in general
71.040.10 Kemijski laboratoriji. Chemical laboratories.
Laboratorijska oprema Laboratory equipment
SIST EN 62703:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62703:2013

---------------------- Page: 2 ----------------------

SIST EN 62703:2013

EUROPEAN STANDARD
EN 62703

NORME EUROPÉENNE
August 2013
EUROPÄISCHE NORM

ICS 17.020; 71.040; 71.120


English version


Expression of performance of fluorometric oxygen analyzers in liquid
media
(IEC 62703:2013)


Expression des performances des Angabe zum Betriebsverhalten von
analyseurs d'oxygène fluormétriques en fluorometrischen Sauerstoffanalysatoren
milieu liquide in flüssigen Medien
(CEI 62703:2013) (IEC 62703:2013)




This European Standard was approved by CENELEC on 2013-08-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62703:2013 E

---------------------- Page: 3 ----------------------

SIST EN 62703:2013
EN 62703:2013 - 2 -

Foreword
The text of document 65B/867/FDIS, future edition 1 of IEC 62703, prepared by IEC/TC 65B
"Measurement and control devices, of IEC technical committee 65: Industrial-process measurement,
control and automation" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 62703:2013.
The following dates are fixed:
(dop) 2014-05-01
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2016-08-01
• latest date by which the national

standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 62703:2013 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:

IEC 60654 (all parts) NOTE Harmonised as EN 60654 (all parts).
IEC 60654-1 NOTE Harmonised as EN 60654-1.
IEC 60770-1 NOTE Harmonised as EN 60770-1.
IEC 61207-1:2010 NOTE Harmonised as EN 61207-1:2010.
IEC 61207-2 NOTE Harmonised as EN 61207-2.
IEC 61298 (all parts) NOTE Harmonised as EN 61298 (all parts).
IEC 61326 (all parts) NOTE Harmonised as EN 61326 (all parts).
ISO 5814:2012 NOTE Harmonised as EN ISO 5814:2012.
ISO 7888:1985 NOTE Harmonised as EN 27888:1993.
ISO 9001 NOTE Harmonised as EN ISO 9001.
ISO 80000-1:2009 NOTE Harmonised as EN ISO 80000-1:2013.

---------------------- Page: 4 ----------------------

SIST EN 62703:2013
- 3 - EN 62703:2013
Annex ZA
(normative)
Normative references to i nternational publications
with their corre
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.