EN 62271-207:2012

High-voltage switchgear and controlgear - Part 207: Seismic qualification for gas-insulated switchgear assemblies for rated voltages above 52 kV

IEC 62271-207:2012 applies to gas-insulated switchgear assemblies for alternating current of rated voltages above 52 kV for indoor and outdoor installations, including their supporting structure. This second edition of IEC 62271-207 cancels and replaces the first edition published in 2007. It constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - modification of the minimum voltage rating from 72,5 kV to above 52 kV; - harmonisation of qualification procedures for GIS with IEEE 693:2005 Annex A and P by modifying the response spectra; - modification of the test procedures; - addition of criteria of allowed stresses; - addition of dynamic analysis CQC.

Hochspannungs-Schaltgeräte und -Schaltanlagen - Teil 207: Erdbebenqualifikation für gasisolierte Schaltgerätekombinationen mit Bemessungsspannungen über 52 kV

Appareillage à haute tension - Partie 207: Qualification sismique pour ensembles d'appareillages à isolation gazeuse pour des niveaux de tension assignée supérieurs à 52 kV

La CEI 62271-207:2012 s'applique aux ensembles d'appareillages à isolation gazeuse à courant alternatif de tension assignée supérieure à 52 kV, installés à l'intérieur ou à l'extérieur, en incluant leurs châssis-supports. Cette deuxième édition de la CEI 62271-207 annule et remplace la première édition publiée en 2007. Elle constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - modification de la tension assignée minimale, passant d'une valeur de 72,5 kV à une valeur supérieure à 52 kV; - harmonisation des procédures de qualification pour ensembles d'appareillage à isolation gazeuse avec les Annexes A et P de l'IEEE 693:2005 en modifiant les spectres de réponse; - modification des procédures d'essai; - ajout de critères des contraintes autorisées; - ajout d'une analyse dynamique CQC.

Visokonapetosne stikalne naprave - 207. del: Seizmična (potresna) kvalifikacija plinsko izoliranih stikalnih sestavov za naznačene vrednosti nad 52 kV (IEC 62271-207:2012)

Ta del standarda IEC 62271 se nanaša na plinsko izolirane stikalne sestave za izmenični tok naznačenih vrednosti nad 52 kV za notranje in zunanje naprave, vključno z njihovo nosilno konstrukcijo. Za stikalne naprave, na primer odklopnike s komoro pod napetostjo, se uporablja standard IEC/TR 62271-300. Navodila o medsebojnih vplivih nosilne konstrukcije in zemlje/temeljev so v dodatku B. Seizmična kvalifikacija stikalnih sestavov upošteva preskušanje značilnih stikalnih sestavov skupaj z metodami analize. Vključeni so medsebojni vplivi med neposredno nameščeno pomožno in nadzorno opremo ter stikalnimi sestavi. Seizmična kvalifikacija stikalnih sestavov se izvede le na zahtevo.

General Information

• Status: Published
• Publication Date: 26-Jul-2012
• Withdrawal Date: 31-May-2015
• ICS: 29.130.10 - High voltage switchgear and controlgear
• Technical Committee: CLC/TC 17AC - High-voltage switchgear and controlgear
• Drafting Committee: IEC/SC 17C - IEC_SC_17C
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 27-Jul-2012
• Completion Date: 27-Jul-2012
• Ref Project: SIST EN 62271-207:2012 - High-voltage switchgear and controlgear - Part 207: Seismic qualification for gas-insulated switchgear assemblies for rated voltages above 52 kV (IEC 62271-207:2012)

Relations

• Replaces: EN 62271-207:2007 - High-voltage switchgear and controlgear - Part 207: Seismic qualification for gas-insulated switchgear assemblies for rated voltages above 52 kV
• Effective Date: 29-Jan-2023
• Replaced By: EN IEC 62271-207:2023 - High-voltage switchgear and controlgear - Part 207: Seismic qualification for gas-insulated switchgear assemblies, metal enclosed and solid-insulation enclosed switchgear for rated voltages above 1 kV
• Effective Date: 19-Jan-2021

Standards Content (Sample)

SLOVENSKI STANDARD
01-oktober-2012
1DGRPHãþD
SIST EN 62271-207:2008
9LVRNRQDSHWRVQHVWLNDOQHQDSUDYHGHO6HL]PLþQDSRWUHVQDNYDOLILNDFLMD
SOLQVNRL]ROLUDQLKVWLNDOQLKVHVWDYRY]DQD]QDþHQHYUHGQRVWLQDGN9,(&

High-voltage switchgear and controlgear - Part 207: Seismic qualification for gas-
insulated switchgear assemblies for rated voltages above 52 kV (IEC 62271-207:2012)
Hochspannungs-Schaltgeräte und -Schaltanlagen - Teil 207: Erdbebenqualifikation für
gasisolierte Schaltgerätekombinationen mit Bemessungsspannungen über 52 kV (IEC
62271-207:2012)
Appareillage à haute tension - Partie 207: Qualification sismique pour ensembles
d'appareillages à isolation gazeuse pour des niveaux de tension assignée supérieurs à
52 kV (CEI 62271-207:2012)
Ta slovenski standard je istoveten z: EN 62271-207:2012
ICS:
29.130.10 Visokonapetostne stikalne in High voltage switchgear and
krmilne naprave controlgear
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 62271-207
NORME EUROPÉENNE
July 2012
EUROPÄISCHE NORM
ICS 29.130.10 Supersedes EN 62271-207:2007

English version
High-voltage switchgear and controlgear -
Part 207: Seismic qualification for gas-insulated switchgear assemblies
for rated voltages above 52 kV
(IEC 62271-207:2012)
Appareillage à haute tension -  Hochspannungs-Schaltgeräte und -
Partie 207: Qualification sismique pour Schaltanlagen -
ensembles d'appareillages à isolation Teil 207: Erdbebenqualifikation für
gazeuse pour des niveaux de tension gasisolierte Schaltgerätekombinationen
assignée supérieurs à 52 kV mit Bemessungsspannungen über 52 kV
(CEI 62271-207:2012) (IEC 62271-207:2012)

This European Standard was approved by CENELEC on 2012-06-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62271-207:2012 E
Foreword
The text of document 17C/542/FDIS, future edition 2 of IEC 62271-207, prepared by SC 17C “High-
voltage switchgear and controlgear assemblies”, of IEC/TC 17 "Switchgear and controlgear", was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62271-207:2012.
The following dates are fixed:
(dop) 2013-03-01
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2015-06-01
• latest date by which the national
standards conflicting with the
document have to be withdrawn
This document supersedes EN 62271-207:2007.

EN 62271-207:2007:
- modification of the minimum voltage rating from 72,5 kV to above 52 kV;
- harmonisation of qualification procedures for GIS with IEEE 693:2005 Annex A and P by modifying
the response spectra;
- modification of the test procedures;
- addition of criteria of allowed stresses;
- addition of dynamic analysis CQC.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62271-207:2012 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 61462 NOTE Harmonized as EN 61462.
IEC 62155 NOTE Harmonized as EN 62155.
IEC 62231 NOTE Harmonized as EN 62231.

- 3 - EN 62271-207:2012
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60068-2-47 - Environmental testing - EN 60068-2-47 -
Part 2-47: Tests - Mounting of specimens for
vibration, impact and similar dynamic tests

IEC 60068-2-57 - Environmental testing - EN 60068-2-57 -
Part 2-57: Tests - Test Ff: Vibration - Time-
history method
IEC 60068-3-3 1991 Environmental testing - EN 60068-3-3 1993
Part 3: Guidance - Seismic test methods
for equipments
IEC 62271-1 - High-voltage switchgear and controlgear - EN 62271-1 -
Part 1: Common specifications
IEC 62271-203 - High-voltage switchgear and controlgear - EN 62271-203 -
Part 203: Gas-insulated metal-enclosed
switchgear for rated voltages above 52 kV

IEC 62271-207 ®
Edition 2.0 2012-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
High-voltage switchgear and controlgear –

Part 207: Seismic qualification for gas-insulated switchgear assemblies for rated

voltages above 52 kV
Appareillage à haute tension –

Partie 207: Qualification sismique pour ensembles d'appareillages à isolation

gazeuse pour des niveaux de tension assignée supérieurs à 52 kV

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX R
ICS 29.130.10 ISBN 978-2-88912-060-4

– 2 – 62271-207  IEC:2012
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Seismic qualification requirements . 6
4.1 General . 6
4.2 Qualification levels . 6
5 Test procedures for qualification . 6
5.1 General . 6
5.2 Mounting . 7
5.3 Measurements . 7
5.4 Frequency range . 7
5.5 Test severity . 7
5.5.1 General . 7
5.5.2 Parameters for time-history excitation . 9
5.5.3 Test directions . 9
5.5.4 Test sequence . 9
6 Qualification by combined test and numerical analysis . 10
6.1 General . 10
6.2 Dynamic and functional data . 11
6.3 Numerical analysis . 11
6.3.1 General . 11
6.3.2 Numerical analysis by the acceleration time-history method . 11
6.3.3 Modal and spectrum analysis using the required response spectrum
(RRS) . 11
6.3.4 Static coefficient analysis . 12
7 Evaluation of the seismic qualification . 12
7.1 Combination of stresses . 12
7.2 Acceptance criteria for the seismic waveform . 13
7.3 Functional evaluation of the test results . 13
7.4 Allowable stresses . 13
8 Documentation . 13
8.1 Information for seismic qualification. 13
8.2 Test report . 14
8.3 Analysis report . 14
Annex A (normative) Characterisation of the test-set . 15
Annex B (informative) Criteria for seismic adequacy of gas-insulated metal-enclosed
switchgear . 17
Bibliography . 19

Figure 1 – Required response spectrum (RRS) for qualification level moderate . 8
Figure 2 – Required response spectrum (RRS) for qualification level high . 9
Figure A.1 – Monogram for the determination of equivalent damping ratio . 16

Table 1 – Seismic qualification levels for switchgear assemblies – Horizontal severities . 6

62271-207  IEC:2012 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
______________
HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR –

Part 207: Seismic qualification for gas-insulated
switchgear assemblies for rated voltages above 52 kV

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable eff
...