iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 50103:1995

(Main)

Guidance on the application of EN 29001 and EN 46001 and of EN 29002 and EN 46002 for the active (including active implantable) medical device industry

Guidance on the application of EN 29001 and EN 46001 and of EN 29002 and EN 46002 for the active (including active implantable) medical device industry

The guidelines contained in this European Standard are applicable to a QUALITY SYSTEM as specified by EN 29001 and EN 46001 or EN 29002 and EN 46002. This European Standard does not add to, or otherwise change the requirements of those standards, and is not intended to be used directly in the assessment of a SUPPLIER' s QUALITY SYSTEM. The guidelines provide concepts and objectives which should be considered by a SUPPLIER of ACTIVE MEDICAL DEVICES while developing and maintaining his QUALITY SYSTEM. This European Standard: - provides examples of how to meet the requirements, while recognizing that other methods which achieve the same ends are equally acceptable; - gives general advice on how to meet the requirements; - draws attention to aspects of requirements that may not be readily apparent to those unfamiliar with QUALITY SYSTEMS used in the ACTIVE MEDICAL DEVICE industry.

Anleitung für die Anwendung von EN 29001 und EN 46001 und von EN 29002 und EN 46002 für die aktive (einschließlich implantierbare aktive) Medizinprodukte herstellende Industrie

Guide pour l'application des EN 29001 et EN 46001 et des EN 29002 et EN 46002 à l'industrie des dispositifs médicaux actifs (comprenant les dispositifs actifs implantables)

Guidance on the application of EN 29001 and EN 46001 and of EN 29002 and EN 46002 for the active

General Information

Status
Withdrawn
Publication Date
06-Jun-1995
Withdrawal Date
31-Jan-2008
ICS
03.120.10 - Quality management and quality assurance
11.040 - Medical equipment
11.040.01 - Medical equipment in general
Technical Committee
CLC/TC 62 - Electrical equipment in medical practice
Drafting Committee
IEC/SC 62D - IEC_SC_62D
Parallel Committee
IEC/SC 62D - IEC_SC_62D
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Feb-2008
Completion Date
01-Feb-2008
Directive
90/385/EEC - Council Directive 90/385/EEC of 20 June 1990 on the approximation of the laws of the Member States relating to active implantable medical devices
93/42/EEC - Council Directive 93/42/EEC of 14 June 1993 concerning medical devices
Mandate
BC/CLC/02-89 - BC/CLC/02-89
Ref Project
SIST EN 50103:1998 - Guidance on the application of EN 29001 and EN 46001 and of EN 29002 and EN 46002 for the active (including active implantable) medical device industry

Buy Standard

EN 50103:1998EN 50103:1998
PreviousNext
Standard
EN 50103:1998
English language
29 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50103:1998
01-september-1998
Guidance on the application of EN 29001 and EN 46001 and of EN 29002 and EN
46002 for the active
Guidance on the application of EN 29001 and EN 46001 and of EN 29002 and EN 46002
for the active (including active implantable) medical device industry
$QOHLWXQJI"UGLH$QZHQGXQJYRQ(1XQG(1XQGYRQ(1XQG(1
I"UGLHDNWLYH HLQVFKOLH"OLFKLPSODQWLHUEDUHDNWLYH 0HGL]LQSURGXNWHKHUVWHOOHQGH
,QGXVWULH
*XLGHSRXUO
DSSOLFDWLRQGHV(1HW(1HWGHV(1HW(1"
O
LQGXVWULHGHVGLVSRVLWLIVP"GLFDX[DFWLIV FRPSUHQDQWOHVGLVSRVLWLIVDFWLIVLPSODQWDEOHV
Ta slovenski standard je istoveten z: EN 50103:1995
ICS:
03.120.10 Vodenje in zagotavljanje Quality management and
kakovosti quality assurance
11.040.01 Medicinska oprema na Medical equipment in general
splošno
SIST EN 50103:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50103:1998

---------------------- Page: 2 ----------------------

SIST EN 50103:1998

---------------------- Page: 3 ----------------------

SIST EN 50103:1998

---------------------- Page: 4 ----------------------

SIST EN 50103:1998

---------------------- Page: 5 ----------------------

SIST EN 50103:1998

---------------------- Page: 6 ----------------------

SIST EN 50103:1998

---------------------- Page: 7 ----------------------

SIST EN 50103:1998

---------------------- Page: 8 ----------------------

SIST EN 50103:1998

---------------------- Page: 9 ----------------------

SIST EN 50103:1998

-----------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 61300-3-45:2023(Main)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-45: Examinations and measurements - Attenuation of random mated multi-fibre connectors
kSIST FprEN IEC 61300-3-45:2023

IEC 61300-3-45:2023 is available as IEC 61300-3-45:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61000-3-45:2023 describes the procedure required to measure the statistical distribution and mean attenuation for random mated optical connectors with physical contact (PC) and angled physical contact (APC) polished multi-fibre rectangular ferrules as defined in the IEC 61754 series. This measurement method is applicable to cable assemblies. This second edition cancels and replaces the first edition published in 2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) addition of sample size for > 12-fibre connector measurement; b) inclusion of guidance for multimode measurement.

  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 63300:2023(Main)
Test methods for electrical and magnetic properties of magnetic powder cores
oSIST prEN IEC 63300:2022

This standard provides the test methods for the electrical and magnetic properties of magnetic powder cores used for inductive components in electronics equipment, switch-mode power supplies and power conversion equipment, and introduces measuring principles, scope of application and matters needing attention for each method. The parameters used to characterize the magnetic powder cores include: inductance factor, effective permeability, complex relative permeability, temperature coefficient of permeability, frequency coefficient of permeability, DC bias characteristic, power loss, and quality factor. This standard is the basis for determining the characteristic parameters of magnetic powder cores.

  • Draft
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60127-2:2014/A1:2023(Amendment)
Miniature fuses - Part 2: Cartridge fuse-links
SIST EN 60127-2:2015/kprA1:2020

NEXT ACTION: HAS CONSULTANT ASSESSMENT BY 2020-01-29
2020-07-06 link to LVD added, asked SR for ZZ and ZA

  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60721-3-4:2019/AC:2023-08(Corrigendum)
Classification of environmental conditions - Part 3-4: Classification of groups of environmental parameters and their severities - Stationary use at non-weatherprotected locations
SIST EN IEC 60721-3-4:2019/AC:2023
  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50360:2017/A1:2023(Amendment)
Product standard to demonstrate the compliance of wireless communication devices, with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 300 MHz to 6 GHz: devices used next to the ear
SIST EN 50360:2018/oprA1:2020

This product standard applies to wireless communication devices used in close proximity to the human ear (e.g. mobile phones, wireless headsets). The applicable frequency range is from 300 MHz to 6 GHz. The objective of this standard is to demonstrate the compliance of such devices with the basic restrictions and exposure limit values related to human exposure to radio frequency electromagnetic fields. For devices used next to the body or in front of the face the applicable product standard is EN 50566:2017. For low power devices the applicable product standard is EN 50663:2017.

  • Draft
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61340-2-3:2016/AC:2023-08(Corrigendum)
Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation
SIST EN 61340-2-3:2016/AC:2023
  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50566:2017/A1:2023(Amendment)
Product standard to demonstrate the compliance of wireless communication devices with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 30 MHz to 6 GHz: hand-held and body mounted devices in close proximity to the human body
SIST EN 50566:2018/oprA1:2020

This product standard applies to wireless communication devices used at distances up to and including 200 mm from the human body, i.e. when held in the hand or in front of the face, mounted on the body, combined with other transmitting or non-transmitting devices or accessories (e.g. belt-clip, camera or Bluetooth add-on), or integrated into garments. The applicable frequency range is from 30 MHz to 6 GHz. The objective of this standard is to demonstrate the compliance of such devices with the basic restrictions and exposure limit values related to human exposure to radio frequency electromagnetic fields. For devices used next to the ear the applicable product standard is EN 50360:2017 [1]. For low power devices the applicable product standard is EN 50663:2017 [2].

  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 63044-4:2021/AC:2023-07(Corrigendum)
Home and building electronic systems (HBES) and building automation and control systems (BACS) - Part 4: General functional safety requirements for products intended to be integrated in HBES and BACS
SIST EN IEC 63044-4:2021/AC:2023
  • Corrigendum
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60061-2:1993/A59:2023(Main)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
SIST EN 60061-2:1999/A59:2023
  • Amendment
    19 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60728-101-1:2023(Main)
Cable networks for television signals, sound signals and interactive services - Part 101-1: RF cabling for two-way home networks with all-digital channels load
SIST EN IEC 60728-101-1:2023

IEC 60728-101-1:2023 provides the requirements and describes the implementation guidelines of RF cabling for two-way home networks; it is applicable to any home network that distributes signals provided by CATV/MATV/SMATV cable networks (including individual receiving systems) having a coaxial cable output. It is also applicable to home networks where some part of the distribution network uses wireless links, for example in place of the receiver cord. This part of IEC 60728 is therefore applicable to RF cabling for two-way home networks with wired cords or wireless links inside a room and primarily intended for television and sound signals operating between about 5 MHz and 3 300 MHz. The frequency range is extended to 6 000 MHz for distribution techniques that replace wired cords with a wireless two-way communication inside a room (or a small number of adjacent rooms) that uses the 5 GHz to 6 GHz band. In a building divided into apartment blocks, the distribution of the signals inside the home starts from the home network interface (HNI) up to the system outlet or terminal input. The requirements at the system outlet are given in IEC 60728-101:2016, Clause 5 and the requirements at the HNI are given in IEC 60728-101:2016, Clause 7. In Clause 5 of this document, additional requirements are given. This document deals with various possibilities to distribute signals in a home network, using coaxial cables, balanced pair cables, fibre optic cables (glass or plastic) and also wireless links inside a room (or a small number of adjacent rooms) to replace wired cords. This document gives references to basic methods of measurement of the operational characteristics of the home cable network in order to assess its performance. All requirements refer to the performance limits, which are obtained between the input(s) at the home network interface (HNI) and the output at any system outlet when terminated in a resistance equal to the nominal load impedance of the system, unless otherwise specified. Where system outlets are not used, the above applies to the terminal input. The present document also provides limits for the accumulation of degradations if the home network is subdivided into a number of parts, using different transmission media (e.g. coaxial cabling, balanced cabling, optical cabling, wireless links). Clause 5 defines the performance limits measured at system outlet or terminal input for an unimpaired (ideal) test signal applied at the HNI. Under normal operating conditions for any digital channel and meeting these limits, the cumulative effect of the impairment of any single parameter at the HNI and that due to the home network produces signals not worse than the requirements given in IEC 60728-101-2. For digitally modulated signals, the quality requirement is a QEF (quasi error-free) reception. This document describes the physical layer connection for home networks. Description of protocols required for layer 2 and higher layers is out of the scope of this document. Logical connections between devices within the home network are therefore not always guaranteed. This International Standard is to be used in conjunction with IEC 60728-101:2016.

  • Draft
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day