EN 60297-3-100:2009
(Main)Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-100: Basic dimensions of front panels, subracks, chassis, racks and cabinets
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-100: Basic dimensions of front panels, subracks, chassis, racks and cabinets
IEC 60297-3-100:2008 specifies the basic dimensions of front panels, subracks, chassis, racks and cabinets of the 482,6 mm (19 in) series. Subsequent standards of the associated IEC 60297-3 series provide detail dimensions for specific parts of the equipment practice, where the basic dimensions are used as interface to other associated parts.
Bauweisen für elektronische Einrichtungen - Maße der 482,6-mm-(19-Zoll-)Bauweise - Teil 3-100: Hauptmaße von Frontplatten, Baugruppenträgern, Einschüben, Gestellen und Schränken
Structures mécaniques pour équipements électroniques - Dimensions des structures mécaniques de la série 482,6 mm (19 pouces) - Partie 3-100: Dimensions de base des panneaux avant, des bacs, des châssis, des bâtis et des baies
La CEI 60297-3-100:2008 spécifie les dimensions de base des panneaux avant, des bacs, des châssis, des bâtis et des baies de la série 482,6 mm (19 pouces). Les autres normes de la série CEI 60297-3 donnent des dimensions détaillées pour des parties spécifiques des équipements lorsque les dimensions de base sont utilisées pour l'interface avec d'autres parties associées.
Mehanske konstrukcije za elektronske strukture - Mere mehanskih konstrukcij serije 482,6 mm (19 palcev) - 3-100. del: Osnovne mere čelnih plošč, okvirov, šasij, stojal in ohišij (IEC 60297-3-100:2008)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60297-3-100:2009
01-april-2009
0HKDQVNHNRQVWUXNFLMH]DHOHNWURQVNHVWUXNWXUH0HUHPHKDQVNLKNRQVWUXNFLM
VHULMHPPSDOFHYGHO2VQRYQHPHUHþHOQLKSORãþRNYLURYãDVLM
VWRMDOLQRKLãLM,(&
Mechanical structures for electronic equipment - Dimensions of mechanical structures of
the 482,6 mm (19 in) series - Part 3-100: Basic dimensions of front panels, subracks,
chassis, racks and cabinets (IEC 60297-3-100:2008)
Bauweisen für elektronische Einrichtungen - Maße der 482,6-mm-(19-Zoll-)Bauweise -
Teil 3-100: Hauptmaße von Frontplatten, Baugruppenträgern, Einschüben, Gestellen und
Schränken (IEC 60297-3-100:2008)
Structures mécaniques pour équipements électroniques - Dimensions des structures
mécaniques de la série 482,6 mm (19 in) - Partie 3-100: Dimensions de base des
panneaux avant, des bacs, des châssis, des bâtis et des baies (CEI 60297-3-100:2008)
Ta slovenski standard je istoveten z: EN 60297-3-100:2009
ICS:
31.240 Mehanske konstrukcije za Mechanical structures for
elektronsko opremo electronic equipment
SIST EN 60297-3-100:2009 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60297-3-100:2009
---------------------- Page: 2 ----------------------
SIST EN 60297-3-100:2009
EUROPEAN STANDARD
EN 60297-3-100
NORME EUROPÉENNE
January 2009
EUROPÄISCHE NORM
ICS 31.240 Supersedes HD 493.1 S1:1988 and HD 493.2 S1:1988
English version
Mechanical structures for electronic equipment -
Dimensions of mechanical structures of the 482,6 mm (19 in) series -
Part 3-100: Basic dimensions of front panels,
subracks, chassis, racks and cabinets
(IEC 60297-3-100:2008)
Structures mécaniques Bauweisen für
pour équipements électroniques - elektronische Einrichtungen -
Dimensions des structures mécaniques Maße der 482,6-mm-(19-Zoll-)Bauweise -
de la série 482,6 mm (19 pouces) - Teil 3-100: Hauptmaße von Frontplatten,
Partie 3-100: Dimensions de base Baugruppenträgern, Einschüben,
des panneaux avant, des bacs, Gestellen und Schränken
des châssis, des bâtis et des baies (IEC 60297-3-100:2008)
(CEI 60297-3-100:2008)
This European Standard was approved by CENELEC on 2008-12-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60297-3-100:2009 E
---------------------- Page: 3 ----------------------
SIST EN 60297-3-100:2009
EN 60297-3-100:2009 - 2 -
Foreword
The text of document 48D/380/FDIS, future edition 1 of IEC 60297-3-100, prepared by SC 48D,
Mechanical structures for electronic equipment, of IEC TC 48, Electromechanical components and
mechanical structures for electronic equipment, was submitted to the IEC-CENELEC parallel vote and
was approved by CENELEC as EN 60297-3-100 on 2008-12-01.
This European Standard supersedes HD 493.1 S1:1988 and HD 493.2 S1:1988.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2009-09-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-12-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60297-3-100:2008 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60917-2-1 NOTE Harmonized as EN 60917-2-1
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.