EN 61310-2:2008

Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking

It gives general rules on marking for identification of machinery, for safe use related to mechanical and electrical hazards, and for the avoidance of hazards arising from incorrect connections. Includes the following significant technical changes with respect to the previous edition: Annex A: additional safety signs included and updated.

Sicherheiten von Maschinen - Anzeigen, Kennzeichen und Bedienen - Teil 2: Anforderungen an die Kennzeichnung

Sécurité des machines - Indication, marquage et manoeuvre - Partie 2: Exigences pour le marquage

spécifie des exigences concernant le marquage des machines, définit des règles générales de marquage pour l'identification des machines, pour leur utilisation sûre, relatives aux risques mécaniques et électriques, et pour éviter les risques liés à des liaisons erronées, comprend les modifications techniques significatives suivantes par rapport à l'édition précédente: Annexe A : signaux de sécurité supplémentaires inclus et mis à jour

Varnost strojev - Prikaz, oznaka in upravljanje - 2. del: Zahteve za označevanje (IEC 61310-2:2007)

General Information

• Status: Published
• Publication Date: 05-Jan-2008
• Withdrawal Date: 30-Nov-2010
• ICS: 01.080.20 - Graphical symbols for use on specific equipment
• ICS: 13.110 - Safety of machinery
• Technical Committee: CLC/TC 44X - Safety of machinery: electrotchnical aspects
• Drafting Committee: IEC/TC 44 - IEC_TC_44
• Parallel Committee: IEC/TC 44 - IEC_TC_44
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 06-Jan-2008
• Completion Date: 06-Jan-2008
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Directive: 2014/53/EU - Directive 2014/53/EU of The European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC
• Directive: 73/23/EEC - Electrical equipment designed for use within certain voltage limits
• Directive: 98/37/EC - Machinery
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN 61310-2:2008 - Safety of machinery - Indication, marking and actuation -- Part 2: Requirements for marking

Relations

• Replaces: EN 61310-2:1995 - Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-junij-2008
1DGRPHãþD
SIST EN 61310-2:1999
9DUQRVWVWURMHY3ULND]R]QDNDLQXSUDYOMDQMHGHO=DKWHYH]DR]QDþHYDQMH
,(&
Safety of machinery - Indication, marking and actuation - Part 2: Requirements for
marking
Sicherheit von Maschinen - Anzeigen, Kennzeichen und Bedienen - Teil 2:
Anforderungen an die Kennzeichnung
Sécurité des machines - Indication, marquage et manoeuvre - Partie 2: Exigences pour
le marquage
Ta slovenski standard je istoveten z: EN 61310-2:2008
ICS:
01.080.20 *UDILþQLVLPEROL]DSRVHEQR Graphical symbols for use on
RSUHPR specific equipment
13.110 Varnost strojev Safety of machinery
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61310-2
NORME EUROPÉENNE
January 2008
EUROPÄISCHE NORM
ICS 13.110 Supersedes EN 61310-2:1995

English version
Safety of machinery -
Indication, marking and actuation -
Part 2: Requirements for marking

(IEC 61310-2:2007)
Sécurité des machines -  Sicherheiten von Maschinen -
Indication, marquage et manoeuvre - Anzeigen, Kennzeichen und Bedienen -
Partie 2: Exigences pour le marquage Teil 2: Anforderungen
(CEI 61310-2:2007) an die Kennzeichnung
(IEC 61310-2:2007)
This European Standard was approved by CENELEC on 2007-12-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61310-2:2008 E
Foreword
The text of document 44/541/FDIS, future edition 2 of IEC 61310-2, prepared by IEC TC 44, Safety of
machinery - Electrotechnical aspects, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 61310-2 on 2007-12-01.
This European Standard supersedes EN 61310-2:1995.
EN 61310-2:2007 includes the following significant technical changes with respect to EN 61310-2:1995:
– Annex A: additional safety signs included and updated.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-09-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-12-01
This European Standard has been prepared under a mandate given to CENELEC by the European
Commission and the European Free Trade Association and covers essential requirements of
EC Directives MD (98/37/EC) and MD (2006/42/EC). See Annex ZZ.
Annexes ZA and ZZ have been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61310-2:2007 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61140 NOTE Harmonized as EN 61140:2002 (not modified).
IEC 61346-1 NOTE Harmonized as EN 61346-1:1996 (not modified).
__________
– 3 – EN 61310-2:2008
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60027-1 1992 Letter symbols to be used in electrical EN 60027-1 2006
technology -
Part 1: General
IEC 60027-2 2005 Letter symbols to be used in electrical EN 60027-2 2007
technology -
Part 2: Telecommunications and electronics

IEC 60027-3 2002 Letter symbols to be used in electrical EN 60027-3 2007
technology -
Part 3: Logarithmic and related quantities,
and their units
1)
IEC 60027-4 1985 Letter symbols to be used in electrical HD 245.4 S1 1987
technology -
Part 4: Symbols for quantities to be used for
rotating electrical machines
IEC 60079-0 2004 Electrical apparatus for explosive gas EN 60079-0 2006
(mod) atmospheres -
Part 0: General requirements
IEC 60204-1 2005 Safety of machinery - Electrical equipment of EN 60204-1 2006
(mod) machines -
Part 1: General requirements
IEC 60417 Data Graphical symbols for use on equipment – –
base
IEC 60529 1989 Degrees of protection provided by EN 60529 1991
enclosures (IP Code) + corr. May 1993
A1 1999 A1 2000
2) 3)
IEC 61310-1 – Safety of machinery - Indication, marking EN 61310-1 2008
and actuation -
Part 1: Requirements for visual, acoustic and
tactile signals
ISO 31-0 1992 Quantities and units - – –
Part 0: General principles
1)
HD 245.4 S1 is superseded by EN 60027-4:2007, which is based on IEC 60027-4:2006.
2)
Undated reference.
3)
Valid edition at date of issue.

Publication Year Title EN/HD Year
ISO 1000 1992 SI units and recommendations for the use of – –
their multiples and of certain other units

ISO 7000 2004 Graphical symbols for use on equipment - – –
Index and synopsis
ISO 7010 2003 Graphical symbols - Safety colours and
– –
safety signs - Safety signs used in
workplaces and public areas
ISO 12100-1 2003 Safety of machinery - Basic concepts, EN ISO 12100-1 2003
general principles for design -
Part 1: Basic terminology, methodology

ISO 12100-2 2003 Safety of machinery - Basic concepts, EN ISO 12100-2 2003
general principles for design -
Part 2: Technical principles
– 5 – EN 61310-2:2008
Annex ZZ
(informative)
Coverage of Essential Requirements of EC Directives
Annex ZZA
(informative)
Coverage of Essential Requirements of Directive 98/37/EC
This European Standard has been prepared under a mandate given to CENELEC by the European
Commission and the European Free Trade Association and within its scope the standard covers the
following essential requirements out of those given in Annex I of the EC Directive 98/37/EC, amended by
Directive 98/79/EC:
– ER 1.7.2;
– ER 1.7.3.
Compliance with this standard provides one means of conformity with the specified essential
requirements of the Directive concerned.
WARNING: Other requirements and other EC Directives may be applicable to the products falling within
the scope of this standard.
Annex ZZB
(informative)
Coverage of Essential Requirements of Directive 2006/42/EC
This European Standard has been prepared under a mandate given to CENELEC by the European
Commission and the European Free Trade Association and within its scope the standard covers the
following essential requirements out of those given in Annex I of the EC Directive 2006/42/EC:
– ER 1.7.1;
– ER 1.7.1.1;
– ER 1.7.1.2.
Compliance with this standard provides one means of conformity with the specified essential
requirements of the Directive concerned.
WARNING: Other requirements and other EC Directives may be applicable to the products falling within
the scope of this standard.
NORME CEI
INTERNATIONALE
IEC
61310-2
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2007-02
Sécurité des machines –
Indication, marquage, manœuvre

Partie 2:
Exigences pour le marquage
Safety of machinery –
Indication, marking and actuation –

Part 2:
Requirements for marking
© IEC 2007 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
CODE PRIX
M
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

61310-2 © IEC:2007 – 3 –
CONTENTS
FOREWORD.5

1 Scope.9
2 Normative references .9
3 Terms and definitions .11
4 Marking for identification and for safe use .11
4.1 General .11
4.2 Marking of complete machinery .13
4.3 Marking for safe use.13
5 Application of markings .15
5.1 General .15
5.2 Representation of rated values.17
6 Marking of connections.17
6.1 General .17
6.2 Mechanical connections .19
6.3 Connections for fluid systems.19
6.4 Electrical connections.19
7 Durability of markings and their attachment .19

Annex A (informative) Graphical symbols and safety signs .21

Bibliography.25

61310-2 © IEC:2007 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
SAFETY OF MACHINERY –
INDICATION, MARKING AND ACTUATION –

Part 2: Requirements for marking

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be render
...