EN 50428:2005

Switches for household and similar fixed electrical installations - Collateral standard - Switches and related accessories for use in home and building electronic systems (HBES)

This clause of Part 2-1 is replaced by the following: This collateral standard applies to HBES switches with a working voltage not exceeding 250 V a.c. and a rated current up to and including 16 A. for household and similar fixed electrical installations either indoors or outdoors and to associated electronic extension units. It applies – to HBES switches for the operation of lamp circuits and the control of the brightness of lamps (dimmers) as well as the control of the speed of motors (e.g. those used in ventilating fans) and for other purposes (e.g. heating installations ), – to sensors, actuators, switched-socket-outlets, associated electronic extension units, etc In the following document the word " HBES switch " is applied to describe all kind of HBES devices e.g. switches, sensors, actuators, switched-socket-outlets, associated electronic extension units, etc. The operation and control are performed – intentionally by a person via an actuating member, a key, a card, etc., via a sensing surface or a sensing unit, by means of touch, proximity, turn, optical, acoustic, thermal, – by physical means, e.g. light, temperature, humidity, time, wind velocity, presence of people, – by any other influence; and transmitted – by an electronic signal via several media, e.g. powerline (mains), twisted pair, optical fibre, radio frequency, infra-red, etc… HBES Switches complying with this standard are suitable for use at ambient temperatures not normally exceeding 25 °C, but occasionally reaching 35 °C. Functional safety aspects of HBES switches are not covered by this standard. Functional safety requirements shall be covered by the standards of the devices which are controlled by the HBES. In locations where special conditions prevail, e.g. higher temperature, special constructions may be required.

Schalter für Haushalt und ähnliche ortsfeste elektrische Installationen - Ergänzungsnorm - Schalter und ähnliches Installationsmaterial zur Verwendung in elektronischer Systemtechnik für Heim und Gebäude (ESHG)

Interrupteurs pour installations électriques fixes domestiques et analogues - Norme collatérale - Interrupteurs et appareils associés pour usage dans les systèmes électroniques des foyers domestiques et bâtiments (HBES)

L'article de la Partie 2-1 est remplacé par le nouvel article suivant: Cette norme collatérale s'applique aux interrupteurs HBES de tension locale ne dépassant pas 250 V en courant alternatif et de courant assigné inférieur ou égal à 16 A, pour installations électriques fixes domestiques et analogues intérieures ou extérieures et pour les éléments électroniques périphériques. Elle s'applique – aux interrupteurs HBES pour le fonctionnement des circuits de lampes et pour la commande de la brillance des lampes (variateurs) ou de la vitesse des moteurs (par exemple ceux des ventilateurs) ainsi que pour d'autres utilisations (par exemple installations de chauffage), – aux capteurs, organes de commande, socles interrupteurs, éléments électroniques périphériques associés, etc. Dans le présent document, le mot "interrupteur HBES" est utilisé pour décrire toutes sortes de produits HBES, par exemple, des interrupteurs, capteurs, organes de commande, socles de prises de courant avec interrupteurs, éléments électroniques périphériques associés, etc. Le fonctionnement et la commande sont réalisés – intentionnellement par une personne, par l'intermédiaire d'un organe de manœuvre, d'une clef, d'une carte, etc., ou d'une surface sensible ou d'un élément sensible au toucher, à la proximité, à la rotation, à un phénomène optique, acoustique, thermique, – par un moyen physique, par exemple la lumière, l'humidité, l'heure, la vitesse du vent, la présence de personnes, – par toute autre influence; et transmis – par un signal électronique via plusieurs supports, par exemple les réseaux d'alimentation électrique (réseau), les paires torsadées, les fibres optiques, les fréquences radio, l'infrarouge, etc… Les interrupteurs HBES conformes à la présente norme sont adaptés à une utilisation à des températures ambiantes ne dépassant pas habituellement 25 °C, mais pouvant occasionnellement atteindre 35 °C. Les aspects sécurité fonctionnelle des interrupteurs HBES ne sont pas couverts par la présente norme. Les exigences de sécurité fonctionnelle doivent être couvertes par les normes correspondantes des produits commandés par les HBES. Dans les locaux présentant des conditions particulières, par exemple une température plus élevée, des constructions spéciales peuvent être exigées.

Stikala za gospodinjstva in podobne nepremične električne inštalacije – Spremljevalni standard – Stikala in pripadajoči pribor za uporabo elektronskih sistemov doma in v stavbah

General Information

• Status: Published
• Publication Date: 30-May-2005
• Withdrawal Date: 31-Dec-2007
• ICS: 29.120.40 - Switches
• ICS: 97.120 - Automatic controls for household use
• Technical Committee: CLC/TC 23BX - CLC_TC_23BX
• Drafting Committee: IEC/SC 23B - IEC_SC_23B
• Parallel Committee: IEC/SC 23B - IEC_SC_23B
• Current Stage: 6060 - Document made available - Publishing
• Completion Date: 31-May-2005
• Directive: 2004/108/EC - Directive 2004/108/EC of the European Parliament and of the Council of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
• Directive: 2004/108/EU - DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 2014/30/EU - Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast)
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Directive: 2014/53/EU - Directive 2014/53/EU of The European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC
• Directive: 73/23/EEC - Electrical equipment designed for use within certain voltage limits
• Directive: 89/336/EEC - Electromagnetic compatibility (EMC)
• Mandate: M/404 - Standardisation Mandate to CEN, CENELEC and ETSI for harmonized standard according to the Electro Magnetic Compatibility (EMC) Directive 2004/108/EC
• Ref Project: SIST EN 50428:2006 - Switches for household and similar fixed electrical installations - Collateral standard - Switches and related accessories for use in home and building electronic systems (HBES)

Relations

• Replaced By: EN IEC 60669-2-1:2022 - Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic control devices
• Effective Date: 07-Jun-2022
• Amended By: EN 50428:2005/A2:2009 - Switches for household and similar fixed electrical installations - Collateral standard - Switches and related accessories for use in home and building electronic systems (HBES)
• Effective Date: 28-Jan-2023
• Amended By: EN 50428:2005/A1:2007 - Switches for household and similar fixed electrical installations - Collateral standard - Switches and related accessories for use in home and building electronic systems (HBES)
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI SIST EN 50428:2006

STANDARD
januar 2006
6WLNDOD]DJRVSRGLQMVWYDLQSRGREQHQHSUHPLþQHHOHNWULþQHLQãWDODFLMH±
6SUHPOMHYDOQLVWDQGDUG±6WLNDODLQSULSDGDMRþLSULERU]DXSRUDERHOHNWURQVNLK
sistemov doma in v stavbah
(istoveten EN 50428:2005)
Switches for household and similar fixed electrical installations – Collateral standard
– Switches and related accessories for use in home and building electronic systems
(HBES)
ICS 5HIHUHQþQDãWHYLOND
29.120.40; 97.120
SIST EN 50428:2006(en)
! "#$%!&!%’()*#+’

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 50428
NORME EUROPÉENNE
EUROPÄISCHE NORM May 2005

ICS 29.120.40; 97.120


English version


Switches for household and similar fixed electrical installations –
Collateral standard –
Switches and related accessories for use
in home and building electronic systems (HBES)


Interrupteurs pour installations électriques Schalter für Haushalt und ähnliche
fixes domestiques et analogues – ortsfeste elektrische Installationen –
Norme collatérale – Ergänzungsnorm –
Interrupteurs et appareils associés Schalter und ähnliches Installations-
pour usage dans les systèmes material in elektronischer Systemtechnik
électroniques des foyers domestiques für Heim und Gebäude (ESHG)
et bâtiments (HBES)






This European Standard was approved by CENELEC on 2004-12-07. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 50428:2005 E

---------------------- Page: 2 ----------------------

EN 50428:2005 - 2 -
Foreword
This European Standard has been prepared by the Technical Committee CENELEC TC 23B:
Switches for household and similar fixed electrical installations.
The text of the draft was submitted to the Unique Acceptance Procedure and was approved by
CENELEC as EN 50428 on 2004-12-07.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-01-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2008-01-01
This European Standard has been prepared under a mandate given to CENELEC by the European
Commission and the European Free Trade Association and covers essential requirements of
EC Directive 89/336/EEC. See Annex ZZ.
This standard has to be used in conjunction with EN 60669-1 and EN 60669-2-1. It lists the
additional changes necessary to convert it into the European Standard: Switches for household and
similar fixed electrical installations - Collateral standard - Switches and related accessories for use
in home and building electronic systems (HBES)
When this standard states "addition", "modification" or "replacement", the relevant text of
EN 60669-1 or EN 60669-2-1 (hereinafter called Part 1 and Part 2-1 respectively) is to be adapted
accordingly.
NOTE  The following numbering system is used:
- subclauses, tables and figures that are numbered starting from 201 are additional to those in Part 2-1;
- additional annexes to Part 1 are lettered AA, BB, etc.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 50428:2005
Contents
1 Scope .6
2 Normative references .6
3 Definitions .7
4 General requirements.
...