prEN IEC 62290-1:2023
(Main)Railway applications - Urban guided transport management and command/control systems - Part 1: System principles and fundamental concepts
Railway applications - Urban guided transport management and command/control systems - Part 1: System principles and fundamental concepts
Bahnanwendungen - Betriebsleit- und Zugsicherungssysteme für den städtischen schienengebundenen Personennahverkehr - Teil 1: Systemgrundsätze und grundlegende Konzepte
Applications ferroviaires - Systèmes de contrôle/commande et de gestion des transports guidés urbains - Partie 1: Principes système et concepts fondamentaux
Železniške naprave - Komandno-kontrolni sistemi za upravljanje urbanega prometa - 1. del: Sistemska načela in osnovni koncepti
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2023
Železniške naprave - Komandno-kontrolni sistemi za upravljanje urbanega
prometa - 1. del: Sistemska načela in osnovni koncepti
Railway applications - Urban guided transport management and command/control
systems - Part 1: System principles and fundamental concepts
Bahnanwendungen - Betriebsleit- und Zugsicherungssysteme für den städtischen
schienengebundenen Personennahverkehr - Teil 1: Systemgrundsätze und
grundlegende Konzepte
Applications ferroviaires - Systèmes de contrôle/commande et de gestion des transports
guidés urbains - Partie 1: Principes système et concepts fondamentaux
Ta slovenski standard je istoveten z: prEN IEC 62290-1:2023
ICS:
03.220.30 Železniški transport Transport by rail
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
9/2946/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 62290-1 ED3
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-04-28 2023-07-21
SUPERSEDES DOCUMENTS:
9/2943/RR
IEC TC 9 : ELECTRICAL EQUIPMENT AND SYSTEMS FOR RAILWAYS
SECRETARIAT: SECRETARY:
France Mr Denis MIGLIANICO
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if any, in
this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of CENELEC,
is drawn to the fact that this Committee Draft for Vote (CDV) is
submitted for parallel voting.
The CENELEC members are invited to vote through the CENELEC
online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of
• any relevant patent rights of which they are aware and to provide supporting documentation,
• any relevant “in some countries” clauses to be included should this proposal proceed. Recipients are reminded that the
enquiry stage is the final stage for submitting "in some countries" clauses. See AC/22/2007.
TITLE:
Railway applications – Urban guided transport management and command/control systems – Part 1: System
principles and fundamental concepts
PROPOSED STABILITY DATE: 2029
NOTE FROM TC/SC OFFICERS:
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
– 2 – IEC CDV 62290-1© IEC 2023
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 9
2 Normative references . 9
3 Terms, definitions and abbreviations . 9
3.1 Terms and definitions. 10
3.2 Abbreviations . 15
4 Concepts . 16
4.1 Urban guided transport (UGT) . 16
4.1.1 General . 16
4.1.2 Operations . 16
4.1.3 Operational facilities . 16
4.1.4 Train . 17
4.1.5 Staff . 17
4.1.6 Passengers . 17
4.2 Grade of automation . 17
4.2.1 Descriptions . 17
4.2.2 Implementation of grades of automation . 19
4.2.3 Grades of automation covered by UGTMS . 19
4.3 Operation management and supervision . 20
4.4 Interoperability, interchangeability, compatibility and adaptability . 20
4.4.1 General . 20
4.4.2 Interoperability. 20
4.4.3 Interchangeability . 20
4.4.4 Compatibility . 20
4.4.5 Adaptability . 21
5 System environment and boundaries . 21
6 General requirements and description of the basic functions . 22
6.1 General requirements . 22
6.1.1 System approach . 22
6.1.2 RAMS requirements . 22
6.1.3 Electromagnetic compatibility . 23
6.1.4 Energy saving . 23
6.1.5 Local conditions . 23
6.1.6 Intermodality between networks . 23
6.1.7 Interoperability between neighbouring networks. 23
6.1.8 Measures to ensure the movement of passengers with reduced mobility . 23
6.1.9 Nominal mode, degraded modes, emergency situation . 23
6.1.10 Basic system performances . 23
6.1.11 Requirements for upgrading GOA . 24
6.1.12 Requirements for adding new parts of line . 24
6.2 Description of the basic functions . 24
6.2.1 General . 24
6.2.2 Basic functions for train operation. 24
IEC CDV 62290-1© IEC 2023 – 3 –
6.2.3 Basic functions for operation management and supervision . 27
Bibliography . 31
Figure 1 – The three-step process followed by the UGTMS standard . 8
Figure 2 – Example of track layout . 17
Figure 3 – System environment . 21
Table 1 – Grades of automation . 18
– 4 – IEC CDV 62290-1© IEC 2023
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
RAILWAY APPLICATIONS –
URBAN GUIDED TRANSPORT MANAGEMENT
AND COMMAND/CONTROL SYSTEMS –
Part 1: System principles and fundamental concepts
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62290-1 has been prepared by IEC technical committee 9:
Electrical equipment and systems for railways.
This third edition cancels and replaces the second edition issued in 2014. It constitutes a
technical revision.
The main technical changes with regard to the previous edition are as follows:
– the figure 3 giving the system environment of UGTMS has been amended to reflect the
adaptation of it. We have removed external equipment for which no requirement is
described in the series. And we have added new external equipment having such
requirements (like the washing machine)
IEC CDV 62290-1© IEC 2023 – 5 –
The text of this standard is based on the following documents:
Draft Report on voting
9/XXXX/FDIS 9/XXXX/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of IEC 62290 series, under the general title: Railway applications – Urban
guided transport management and command/control systems, can be found on the IEC
website. (See also introduction to this standard.)
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
– 6 – IEC CDV 62290-1© IEC 2023
1 INTRODUCTION
2 IEC 62290 standard series specifies the functional, system and interface requirements for the
3 command, control, and management systems intended to be used on urban, guided
4 passenger transport lines and networks. This series does not apply to lines that are operated
5 under specific railway regulations, unless otherwi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.