EN 50174-3:2003

Information technology - Cabling installation - Part 3: Installation planning and practices outside buildings

This European Standard specifies the basic requirements for the planning, implementation and operation of information technology cabling using balanced copper cabling and optical fibre cabling. This standard is applicable to a) cabling designed to support particular analogue and digital communications services including voice services; b) generic cabling systems designed in accordance with series EN 50173 and intended to support a wide range of communications services. This standard is intended for those involved in the procurement, installation and operation of information technology cabling. Furthermore this standard is addressed to - architects, building designers and builders; - main contractors; - designers, suppliers, installers, maintainers and owners of information technology cabling; - public network providers and local service providers; - end users. This standard is applicable to certain hazardous environments but does not exclude additional requirements which are applicable in particular circumstances, e.g. in the presence of electricity supply and electrified railways. This part of the standard c) sets out requirements for satisfactory installation and operation of information technology cabling outside buildings; it is not restricted to campus areas, d) excludes specific requirements applicable to other cabling systems (e.g. power cabling, coaxial cabling); however, it takes account of the effects other cabling systems may have on the installation of information technology cabling (and vice versa) and gives general advice.

Informationstechnik - Installation von Kommunikationsverkabelung - Teil 3: Installationsplanung und -praktiken im Freien

Technologies de l'information - Installation de câblage - Partie 3: Planification et pratiques d'installation à l'extérieur des bâtiments

Informacijska tehnologija – Pokabljenje – 3. del: Načrtovanje inštalacij in tehnike dela zunaj zgradb

General Information

• Status: Withdrawn
• Publication Date: 23-Nov-2003
• Withdrawal Date: 31-Aug-2006
• ICS: 33.040.50 - Lines, connections and circuits
• ICS: 35.110 - Networking
• Technical Committee: CLC/TC 215 - Electrotechnical aspects of telecommunication equipment
• Drafting Committee: ISO/IEC/JTC 1/SC25 - ISO/IEC_JTC_1/SC25
• Parallel Committee: ISOIEC/JTC 1/SC25 - ISOIEC_JTC_1/SC25
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 02-Sep-2016
• Completion Date: 02-Sep-2016
• Mandate: M/212 - ICT - metallic and optical cables and cabling systems
• Mandate: M/212;M/239 - M/212;M/239
• Mandate: M/239 - Mandate to CEN/CENELEC/ETSI for standardization, and a study, in the field of air traffic management equipment and systems
• Ref Project: SIST EN 50174-3:2005 - Information technology - Cabling installation -- Part 3: Installation planning and practices outside buildings

Relations

• Replaced By: EN 50174-3:2013 - Information technology - Cabling installation - Part 3: Installation planning and practices outside buildings
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SIST EN 50174-3:2005SLOVENSKIseptember 2005
STANDARDInformacijska tehnologija – Pokabljenje – 3. del: Načrtovanje inštalacij in tehnike dela zunaj zgradbInformation technology – Cabling installation – Part 3: Installation planning and practices outside buildings©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST EN 50174-3:2005(en)ICS33.040.50; 35.110







EUROPEAN STANDARD
EN 50174-3 NORME EUROPÉENNE EUROPÄISCHE NORM
November 2003 CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50174-3:2003 E
ICS 33.040.50; 35.110
English version
Information technology -
Cabling installation Part 3: Installation planning and practices outside buildings
Technologies de l'information -
Installation de câblage Partie 3: Planification et pratiques d'installation à l'extérieur des bâtiments
Informationstechnik -
Installation von Kommunikationsverkabelung Teil 3: Installationsplanung
und -praktiken im Freien
This European Standard was approved by CENELEC on 2003-09-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.



EN 50174-3:2003 – 2 –
Foreword This European Standard was prepared by Technical Committee CENELEC TC 215, Electrotechnical aspects of telecommunication equipment, under the framework of the Mandates M/212 on “Telecommunication cables and cabling systems“ and M/239 on “Air traffic management equipment and systems“.
The text of the draft was submitted to the formal vote and was approved by CENELEC as EN 50174-3 on 2003-09-01. The following dates were fixed: - latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement
(dop)
2004-09-01 - latest date by which the national standards
conflicting with the EN have to be withdrawn
(dow)
2006-09-01 This standard comprises three parts. All three parts support the specification, implementation and operation of information technology cabling using both balanced copper and optical fibre cabling components. These components may be combined to provide cabling solutions either in accordance with the design requirements of series EN 50173 or to meet the requirements of one or more application-specific standards (such as EN 50098-1 or EN 50098-2). This part, EN 50174-3, contains detailed requirements and guidance relating to the installation planning and practices outside buildings and is intended to be used by the personnel directly involved in the planning and installation of information technology cabling. It shall be used during the different implementation phases when installing information technology cabling, i.e. during the planning phase, the design phase and installation phase. Annexes designated “informative” are given for information only.
In this standard, Annexes A and B are informative.



– 3 – EN 50174-3:2003 Content Introduction.7 1 Scope .9 2 Normative references.9 3 Definitions and abbreviations.10 3.1 Definitions.10 3.2 Abbreviations.
...