EN 60064:1995/A3:2006
(Amendment)Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements
Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements
Glühlampen für den Hausgebrauch und ähnliche allgemeine Beleuchtungszwecke - Anforderungen an die Arbeitsweise
Lampes à filament de tungstène pour usage domestique et éclairage général similaire - Prescriptions de performances
Žarnice za uporabo v stanovanjih in podobnih splošnih primerih razsvetljave – Tehnične zahteve (IEC 60064:1993/A3:2005, spremenjen)
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 60064:1995/A3:2006
STANDARD
oct 2006
Žarnice za uporabo v stanovanjih in podobnih splošnih primerih razsvetljave –
Tehnične zahteve (IEC 60064:1993/A3:2005, spremenjen)
Tungsten filament lamps for domestic and similar general lighting purposes -
Performance requirements (IEC 60064:1993/A3:2005, modified)
ICS 29.140.20 Referenčna številka
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
EUROPEAN STANDARD
EN 60064/A3
NORME EUROPÉENNE
May 2006
EUROPÄISCHE NORM
ICS 29.140.20
English version
Tungsten filament lamps
for domestic and similar
general lighting purposes –
Performance requirements
(IEC 60064:1993/A3:2005, modified)
Lampes à filament de tungstène Glühlampen für den Hausgebrauch
pour usage domestique und ähnliche allgemeine
et éclairage général similaire – Beleuchtungszwecke –
Prescriptions de performances Anforderungen an die Arbeitsweise
(CEI 60064:1993/A3:2005, modifié) (IEC 60064:1993/A3:2005, modifiziert)
This amendment A3 modifies the European Standard EN 60064:1995; it was approved by CENELEC on
2005-10-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60064:1995/A3:2006 E
Foreword
The text of amendment 3:2005 to the International Standard IEC 60064:1993, prepared by SC 34A,
Lamps, of IEC TC 34, Lamps and related equipment, together with the common modifications prepared by
CENELEC Reporting Secretariat SR 34A, was submitted to the formal vote and was approved by
CENELEC as amendment A3 to EN 60064:1995 on 2005-10-01.
The following dates were fixed:
– latest date by which the amendment has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-12-01
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2008-10-01
__________
Endorsement notice
The text of the amendment 3:2005 to the International Standard IEC 60064:1993 was approved by
CENELEC as an amendment to the European Standard with agreed common modifications as given
below.
COMMON MODIFICATIONS
Lamps with E26 caps are excluded from this European Standard as they do not comply with European
safety requirements.
__________
NORME CEI
INTERNATIONALE IEC
INTERNATIONAL
STANDARD
AMENDEMENT 3
AMENDMENT 3
2005-03
Amendement 3
Lampes à filament de tungstène pour usage
domestique et éclairage général similaire –
Prescriptions de performances
Amendment 3
Tungsten filament lamps for domestic and
similar general lighting purposes –
Performance requirements
Les feuilles de cet amendement sont à insérer
dans la CEI 60064 (1993)
The sheets contained in this amendment are to be
inserted in IEC 60064 (1993)
© IEC 2005 Droits de reproduction réservés ⎯ Copyright - all rights reserved
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale PRICE CODE Q
International Electrotechnical Commission
Международная Электротехническая Комиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue
60064 amend. 3 © CEI:2005
INSTRUCTIONS POUR L’INSERTION INSTRUCTIONS FOR THE INSERTION
DES NOUVELLES PAGES ET FEUILLES OF NEW PAGES AND DATA SHEETS
DE CARACTÉRISTIQUES DANS LA IN PUBLICATION 60064
PUBLICATION 60064
----------------------- -----------------------
1. Retirer les pages 66 et 68 existantes et 1. Remove the existing pages 67 and 69 and
insérer les nouvelles pages 66 et 68. insert in their places the new pages 67
and 69
2. Remplacer la feuille : 2. Replace the lamp data sheets :
60064-IEC-4005-1 par 60064-IEC-4005-2 60064-IEC-4005-1 with 60064-IEC-4005-2
60064-IEC-4010-1 par 60064-IEC-4010-2 60064-IEC-4010-1 with 60064-IEC-4010-2
60064-IEC-4015-1 par 60064-IEC-4015-2 60064-IEC-4015-1 with 60064-IEC-4015-2
60064-IEC-4030-1 par 60064-IEC-4030-2 60064-IEC-4030-1 with 60064-IEC-4030-2
60064-IEC-4050-1 par 60064-IEC-4050-2 60064-IEC-4050-1 with 60064-IEC-4050-2
60064-IEC-4060-1 par 60064-IEC-4060-2 60064-IEC-4060-1 with 60064-IEC-4060-2
60064-IEC-4070-1 par 60064-IEC-4070-2 60064-IEC-4070-1 with 60064-IEC-4070-2
60064-IEC-5005-1 par 60064-IEC-5005-2 60064-IEC-5005-1 with 60064-IEC-5005-2
60064-IEC-5010-1 par 60064-IEC-5010-2 60064-IEC-5010-1 with 60064-IEC-5010-2
60064-IEC-5015-1 par 60064-IEC-5015-2 60064-IEC-5015-1 with 60064-IEC-5015-2
60064-IEC-5030-1 par 60064-IEC-5030-2 60064-IEC-5030-1 with 60064-IEC-5030-2
60064-IEC-5050-1 par 60064-IEC-5050-2 60064-IEC-5050-1 with 60064-IEC-5050-2
60064-IEC-5060-1 par 60064-IEC-5060-2 60064-IEC-5060-1 with 60064-IEC-5060-2
60064-IEC-5070-1 par 60064-IEC-5070-2 60064-IEC-5070-1 with 60064-IEC-5070-2
----------------------- -----------------------
60064 Amend. 3 © IEC:2005
FOREWORD
This amendment has been prepared by subcommittee 34A: Lamps, of IEC technical
committee 34: Lamps and related equipment.
The text of this amendment is based on the following documents:
FDIS Report on voting
34A/1122/FDIS 34A/1131/RVD
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
This amendment has been drafted in accordance with the ISO/IEC Directives, Part 2.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the maintenance result date indicated on the IEC web site under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
⎯⎯⎯⎯⎯⎯⎯
NORME CEI
INTERNATIONALE IEC
INTERNATIONAL
Edition 6.3
STANDARD
2005-03
Edition 6:1993, modifiée selon les amendements 1(2000),
2(2002) et 3(2005)
Edition 6:1993, amended in accordance with amendments 1(2000),
2(2002) and 3(2005)
Lampes à filament de tungstène pour usage
domestique et éclairage général similaire –
Prescriptions de performances
Tungsten filament lamps for domestic and
similar general lighting purposes –
Performance requirements
Commission Electrotechnique Internationale
International Electrotechnical Commission
Международная Электротехническая Комиссия
60064 © IEC:2005 – 7 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
TUNGSTEN FILAMENT LAMPS FOR DOMESTIC AND
SIMILAR GENERAL LIGHTING PURPOSES –
PERFORMANCE REQUIREMENTS
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60064 has been prepared by subcommittee 34A: Lamps, of IEC
technical committee 34: Lamps and related equipment.
This consolidated version of IEC 60064 is based on the sixth edition (1993) and its
amendments 1(2000), 2(2002) et 3(2005).
It bears the edition number 6.3.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
60064 Amend.2 IEC:2002 – 65 –
Section 8: Lamp data sheets
8.1 List of lamp data sheets and ILCOS codes
As additional information this table shows for each data sheet the ILCOS codes according to
)
IEC/TS 61231 .
NOTE 1 The code does not give all the technical characteristics necessary to specify a lamp fully, but it should
aid in the correct replacement of lamps concerning their interchangeability and compatibility.
NOTE 2 The code is given here in its standard version (ILCOS D). If needed, the code can be shortened
according to subclause 4.3 of IEC/TS 61231.
NOTE 3 Where "voltage" is shown here in the code, it is intended that the actual rated lamp voltage or voltage
range will be given. In case of a voltage range the two numbers are given separated by a slash.
NOTE 4 Some lamps show the same ILCOS code but are different regarding their luminous flux (normal or high)
or regarding their life. According to subclause 4.3 of IEC/TS 61231 this can be indicated by an asterisk (*) and
explained in a separate remark.
Sheet No. Watts Bulb Cap Finish*Life Luminous ILCOS code
flux**
W h
64-IEC-1010 25 A60 E26/24 C, F 2 250 N IAA/C-25-voltage-E26/24-60
IAA/F-25-voltage-E26/24-60
64-IEC-1011 25 A60 E26/24 W 2 250 N IAA/W-25-voltage-E26/24-60
64-IEC-1030 40 A60 E26/24 C, F 1 350 N IAA/C-40-voltage-E26/24-60
IAA/F-40-voltage-E26/24-60
64-IEC-1031 40 A60 E26/24 W 1 350 N IAA/W-40-voltage-E26/24-60
64-IEC-1040 40 A60 E26/24 C, F 900 N IAA/C-40-voltage-E26/24-60
IAA/F-40-voltage-E26/24-60
64-IEC-1041 40 A60 E26/24 W 900 N IAA/W-40-voltage-E26/24-60
64-IEC-1050 60 A60 E26/24 C, F 900 H IAA/C-60-voltage-E26/24-60
IAA/F-60-voltage-E26/24-60
64-IEC-1051 60 A60 E26/24 W 900 H IAA/W-60-voltage-E26/24-60
60064-IEC-1060 75 A60 E26/24 C, F 675 H IAA/C-75-voltage-E26/24-60
IAA/F-75-voltage-E26/24-60
60064-IEC-1061 75 A60 E26/24 W 675 H IAA/W-75-voltage-E26/24-60
64-IEC-1070 100 A60 E26/24 C, F 675 H IAA/C-100-voltage-E26/24-60
IAA/F-100-voltage-E26/24-60
64-IEC-1071 100 A60 E26/24 W 675 H IAA/W-100-voltage-E26/24-60
64-IEC-1090 150 A67 E26/24 C, F 675 H IAA/C-150-voltage-E26/24-67
IAA/F-150-voltage-E26/24-67
64-IEC-1091 150 A67 E26/24 W 675 H IAA/W-150-voltage-E26/24-67
64-IEC-1110 200 A71 E26/24 C, F 675 H IAA/C-200-voltage-E26/24-71
IAA/F-200-voltage-E26/24-71
64-IEC-1111 200 A67 E26/24 W 675 H IAA/W-200-voltage-E26/24-67
———————
)
IEC/TS 61231, 1999, International lamp coding system (ILCOS)
60064 Amend. 3 © IEC:2005 – 67 –
Sheet No. Watts Bulb Cap Finish*Life Luminous ILCOS code
flux**
W h
64-IEC-2010 30 A55,PS55 E26/25 C
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.