EN 60061-1:1993/A54:2016

Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

Subscribe to IEC 60061 Database to access the full and updated content of the series. Consolidated edition incorporating the sheets of the third edition (1969) plus supplements A, B, C, D, E, F, G, H, J, K, L, M, N, P, Q R, S, T and U valid on 1996-12-31.

Lampensockel und -fassungen sowie Lehren zur Kontrolle der Austauschbarkeit und Sicherheit - Teil 1: Lampensockel

Culots de lampes et douilles ainsi que calibres pour le contrôle de l'interchangeabilité et de la sécurité - Partie 1: Culots de lampes

Subscribe to IEC 60061 Database to access the full and updated content of the series. Edition consolidée incorporant les feuilles de la troisième édition (1969) et de ses compléments A, B, C, D, E, F, G, H, J, K, L, M, N, R, S, T et U valable au 31 décembre 1996.

Vznožki in okovi žarnic in sijalk skupaj s kalibri za kontrolo medsebojne zamenljivosti in varnosti - 1. del: Vznožki sijalk - Dopolnilo A54 (IEC 60061-1:1969/A54:2016)

General Information

• Status: Published
• Publication Date: 22-Sep-2016
• Withdrawal Date: 03-Jul-2019
• ICS: 29.140.10 - Lamp caps and holders
• Technical Committee: CLC/TC 34 - 'Lamps and related equipment
• Drafting Committee: IEC/SC 34B - IEC_SC_34B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 23-Sep-2016
• Completion Date: 23-Sep-2016
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Ref Project: SIST EN 60061-1:1999/A54:2016 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps - Amendment 54 (IEC 60061-1:1969/A54:2016)

Relations

• Amends: EN 60061-1:1993 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
• Effective Date: 24-Mar-2015

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2016
Vznožki in okovi žarnic in sijalk skupaj s kalibri za kontrolo medsebojne
zamenljivosti in varnosti - 1. del: Vznožki sijalk - Dopolnilo A54 (IEC 60061-
1:1969/A54:2016)
Lamp caps and holders together with gauges for the control of interchangeability and
safety - Part 1: Lamp caps - Amendment 54 (IEC 60061-1:1969/A54:2016)
Ta slovenski standard je istoveten z: EN 60061-1:1993/A54:2016
ICS:
29.140.10 Grla in držala žarnic Lamp caps and holders
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60061-1:1993/A54

NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2016
ICS 29.140.10
English Version
Lamp caps and holders together with gauges
for the control of interchangeability and safety -
Part 1: Lamp caps
(IEC 60061-1:1969/A54:2016)
Culots de lampes et douilles ainsi que calibres  Lampensockel und -fassungen sowie Lehren
pour le contrôle de l'interchangeabilité et de la sécurité - zur Kontrolle der Austauschbarkeit und Sicherheit -
Partie 1: Culots de lampes Teil 1: Lampensockel
(IEC 60061-1:1969/A54:2016) (IEC 60061-1:1969/A54:2016)
This amendment A54 modifies the European Standard EN 60061-1:1993; it was approved by CENELEC on 2016-07-04. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60061-1:1993/A54:2016 E

European foreword
The text of document 34B/1853/FDIS, future IEC 60061-1:1969/A54, prepared by SC 34B "Lamp caps
and holders" of IEC/TC 34 "Lamps and related equipment" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN 60061-1:1993/A54:2016.
The following dates are fixed:
(dop) 2017-04-04
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2019-07-04
• latest date by which the national standards conflicting with
the document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 60061-1:1969/A54:2016 was approved by CENELEC as a
European Standard without any modification.
NORME
INTERNATIONALE IEC
INTERNATIONAL 60061-1
STANDARD
AMENDEMENT 54
AMENDMENT 54
2016-05
Amendement 54
Culots de lampes et douilles ainsi que calibres

pour le contrôle de l'interchangeabilité
et de la sécurité –
Partie 1:
Culots de lampes
Amendment 54
Lamp caps and holders together with
gauges for the control of interchangeability
and safety –
Part 1:
Lamp caps
Les feuilles de cet amendement sont à insérer dans
l'IEC 60061­1 (1969)
The sheets contained in this amendment are to be inserted
in IEC 60061­1 (1969)
 IEC 2016 Droits de reproduction réservés  Copyright - all rights reserved

International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch

NORME
INTERNATIONALE IEC
INTERNATIONAL
60061-1
STANDARD
Edition 3.54
2016-05
Modifiée selon les Compléments:
Amended in accordance with Supplements:

A(1970), B(1971), C(1972), D(1972), E(1972), F(1975), G(1977)
H(1977), J(1980), K(1983), L(1987), M(1989), N(1992), P(1994)

Q(1994), R(1995), S(1996), T(1996), U(1996), V(1997),
et les amendements/and amendments 21(1998), 22(1999), 23(1999), 24(2000), 25(2001), 26(2001),
27(2001), 28(2002), 29(2002), 30(2002), 31(2003), 32(2003), 33(2003), 34(2004), 35(2004), 36(2005),
37(2006), 38(2007), 39(2007), 40(2008), 41(2009), 42(2009), 43(2010), 44(2010), 45(2010), 46(2011),
47(2011), 48(2012), 49(2013), 50(2013), 51(2014), 52(2015), 53(2015) et/and 54(2016)

Culots de lampes et douilles ainsi que calibres
pour le contrôle de l'interchangeabilité

et de la sécurité –
Partie 1:
Culots de lampes
Lamp caps and holders together with
gauges for the control of interchangeability
and safety –
Part 1:
Lamp caps
 IEC 2016 Droits de reproduction réservés  Copyright - all rights reserved

Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun procédé, any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission in
microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch

IEC 60061-1:1969/AMD54:2016  IEC 2016 – 1 –

SOMMAIRE CONTENTS
SOMMAIRE PAR DÉSIGNATION CONTENTS BY DESIGNATION
Feuilles Sheet
Culots à deux broches G1.27, GX1.27 & GY1.3 . 7004-2-2 Bi-pin caps G1.27, GX1.27 & GY1.3 . 7004-2-2
Culots à deux broches G2.54, GX2.54 & GY2.5 . 7004-3-2 Bi-pin caps G2.54, GX2.54 & GY2.5 . 7004-3-2
Culots PX26d, PY26d-1 … PY26d-7 . 7004-5-7 Caps PX26d, PY26d-1 … PY26d-7 . 7004-5-7
Culots à vis E11 . 7004-6-1 Screw caps E11 . 7004-6-1
Culots à vis EY10 . 7004-7-1 Screw caps EY10 . 7004-7-1
Culots à baïonnette BAX9s . 7004-8-1 Bayonet caps BAX9s . 7004-8-1
Culots à baïonnette BAY9s . 7004-9-1 Bayonet caps BAY9s . 7004-9-1
Culots B22d . 7004-10-7 Caps B22d . 7004-10-7
Culot à baïonnette B22d-3(90°/135°)/25x26 . 7004-10A-2 Bayonet cap B22d-3(90°/135°)/25x26 . 7004-10A-2
Culots B15d . 7004-11-6 Caps B15d . 7004-11-6
Culots à baïonnette BA15 . 7004-11A-9 Bayonet caps BA15 . 7004-11A-9
Culots à baïonnette BAY15d . 7004-11B-7 Bayonet caps BAY15d . 7004-11B-7
Culots BAZ15 . 7004-11C-3 Caps BAZ15 . 7004-11C-3
Culots à baïonnette BA15s-3 . 7004-11D-1 Bayonet caps BA15s-3 . 7004-11D-1
Culots BAW15 . 7004-11E-1 Caps BAW15 . 7004-11E-1
Culots à baïonnette BA20 . 7004-12-7 Bayonet caps BA20 . 7004-12-7
Culots à baïonnette pour automobiles Bayonet automobile caps
BA21-3(120°) . 7004-13-4 BA21-3(120°) . 7004-13-4
Culot à baïonnette BA9 . 7004-14-9 Bayonet caps BA9 . 7004-14-9
Culot à baïonnette BA7 . 7004-15-2 Bayonet cap BA7 . 7004-15-2
Culot à baïonnette BY22d . 7004-17-3 Bayonet cap BY22d . 7004-17-3
Culots à baïonnette BAX15d . 7004-18-1 Bayonet caps BAX15d . 7004-18-1
Culots BAU15 . 7004-19-2 Caps BAU15 . 7004-19-2
Connecteur des lampes terminées G16d . 7004-20-2 Termination on finished lamps G16d . 7004-20-2
Culots à vis E27 . 7004-21-10 Screw caps E27 . 7004-21-10
Culots à vis E26 . 7004-21A-3 Screw caps E26 . 7004-21A-3
Culots à vis E10 . 7004-22-6 Screw caps E10 . 7004-22-6
Culots à vis E14 . 7004-23-6 Screw caps E14 . 7004-23-6
Culots à vis E40 . 7004-24-6 Screw caps E40 . 7004-24-6
Culots à vis E39 . 7004-24A-1 Screw caps E39 . 7004-24A-1
Culot à vis E5 . 7004-25-3 Screw cap E5 . 7004-25-3
Culot à vis E17 . 7004-26-2 Screw cap E17 . 7004-26-2
Culot à vis E27/51x39 . 7004-27-3 Screw cap E27/51x39 . 7004-27-3
Culot à vis E12 . 7004-28-2 Screw cap E12 . 7004-28-2
Culot à vis à double contact E26d . 7004-29-2 Double contact screw cap E26d . 7004-29-2
Culots à vis préfocus EP10 . 7004-30-2 Prefocus screw caps EP10. 7004-30-2
Culots préfocus P20d, PX20d, PY20d & PZ20d . 7004-31-2 Prefocus caps P20d, PX20d, PY20d & PZ20d . 7004-31-2
Culots préfocus P22d & PX22d . 7004-32-2 Prefocus caps P22d & PX22d . 7004-32-2
Culots 2G13 . 7004-33-4 Caps 2G13 . 7004-33-4
Culots préfocus - Assemblage de la collerette Prefocus caps - Assembly of ring and cap
et du culot sur lampes terminées PX43t . 7004-34-2 on finished lamps PX43t . 7004-34-2
Culot préfocus PX13.5s . 7004-35-2 Prefocus cap PX13.5s . 7004-35-2
Culot préfocus P26s sur la lampe terminée . 7004-36-1 Prefocus cap P26s on finished lamp . 7004-36-1
Culots préfocus - Assemblage de la collerette Prefocus caps - Assembly of ring and
et du culot sur lampes terminées PKX22s . 7004-37-2 cap on finished lamps PKX22s . 7004-37-2

IEC 60061-1
IEC 60061-1:1969/AMD54:2016  IEC 2016 – 2 –

Feuilles Sheet
Culots préfocus P43t . 7004-39-6 Prefocus caps P43t . 7004-39-6
Culot préfocus P13.5s . 7004-40-2 Prefocus cap P13.5s . 7004-40-2
Culots préfocus P28s. 7004-42-7 Prefocus caps P28s . 7004-42-7
Culots préfocus P40s. 7004-43-5 Prefocus caps P40s . 7004-43-5
Culot préfocus P30s-10.3. Assemblage sur lampes Prefocus cap P30s-10.3. Assembly on finished
ter
...