EN 62056-46:2002

Electricity metering - Data exchange for meter reading, tariff and load control - Part 46: Data link layer using HDLC protocol

Specifies the data link layer for connection-oriented, HDLC-based, asynchronous communication profile.

Messung der elektrischen Energie - Zählerstandsübertragung, Tarif- und Laststeuerung - Teil 46: Anwendung des HDLC-Protokolls in der Verbindungsschicht

Equipements de mesure de l'énergie électrique - Echange des données pour la lecture des compteurs, le contrôle des tarifs et de la charge - Partie 46: Couche liaison utilisant le protocole HDLC

Merjenje električne energije – Izmenjevanje podatkov za odbiranje stanja električnih števcev ter krmiljenje tarife in obremenitve – 46. del: Plast podatkovnih povezav z uporabo protokola HDLC (IEC 62056-46:2002)

General Information

• Status: Published
• Publication Date: 20-Jun-2002
• Withdrawal Date: 28-Feb-2005
• ICS: 35.100.20 - Data link layer
• ICS: 91.140.50 - Electricity supply systems
• Technical Committee: CLC/TC 13 - Equipment for electrical energy measurement and load control
• Drafting Committee: IEC/TC 13 - IEC_TC_13
• Parallel Committee: IEC/TC 13 - IEC_TC_13
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 21-Jun-2002
• Completion Date: 21-Jun-2002
• Mandate: M/441 - Standardisation mandate to CEN, CENELEC and ETSI in the field of measuring instruments for the development of an open architecture for utility meters involving communication protocols enabling interoperability
• Mandate: M/490 - Standardisation mandate to the European Standardisation Organisations (ESOs) to support European Smart Grid deployment
• Ref Project: SIST EN 62056-46:2004 - Electricity metering - Data exchange for meter reading, tariff and load control -- Part 46: Data link layer using HDLC protocol

Relations

• Amended By: EN 62056-46:2002/A1:2007 - Electricity metering - Data exchange for meter reading, tariff and load control - Part 46: Data link layer using HDLC protocol
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62056-46:2004
01-januar-2004
0HUMHQMHHOHNWULþQHHQHUJLMH±,]PHQMHYDQMHSRGDWNRY]DRGELUDQMHVWDQMD
HOHNWULþQLKãWHYFHYWHUNUPLOMHQMHWDULIHLQREUHPHQLWYH±GHO3ODVWSRGDWNRYQLK
SRYH]DY]XSRUDERSURWRNROD+'/&,(&
Electricity metering - Data exchange for meter reading, tariff and load control -- Part 46:
Data link layer using HDLC protocol
Messung der elektrischen Energie - Zählerstandsübertragung, Tarif- und Laststeuerung -
- Teil 46: Anwendung des HDLC-Protokolls in der Verbindungsschicht
Equipements de mesure de l'énergie électrique - Echange des données pour la lecture
des compteurs, le contrôle des tarifs et de la charge -- Partie 46: Couche liaison utilisant
le protocole HDLC
Ta slovenski standard je istoveten z: EN 62056-46:2002
ICS:
17.220.20 0HUMHQMHHOHNWULþQLKLQ Measurement of electrical
PDJQHWQLKYHOLþLQ and magnetic quantities
35.100.20 Podatkovni povezovalni sloj Data link layer
91.140.50 Sistemi za oskrbo z elektriko Electricity supply systems
SIST EN 62056-46:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62056-46:2004

---------------------- Page: 2 ----------------------

SIST EN 62056-46:2004
EUROPEAN STANDARD EN 62056-46
NORME EUROPÉENNE
EUROPÄISCHE NORM June 2002
ICS 91.140.50; 35.100.20
English version
Electricity metering -
Data exchange for meter reading, tariff and load control
Part 46: Data link layer using HDLC protocol
(IEC 62056-46:2002)
Equipements de mesure Messung der elektrischen Energie -
de l'énergie électrique - Zählerstandsübertragung,
Echange des données pour la lecture Tarif- und Laststeuerung
des compteurs, le contrôle des tarifs Teil 46: Anwendung des HDLC-Protokolls
et de la charge in der Verbindungsschicht
Partie 46: Couche liaison utilisant (IEC 62056-46:2002)
le protocole HDLC
(CEI 62056-46:2002)
This European Standard was approved by CENELEC on 2002-03-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62056-46:2002 E

---------------------- Page: 3 ----------------------

SIST EN 62056-46:2004
EN 62056-46:2002 - 2 -
Foreword
The text of document 13/1267/FDIS, future edition 1 of IEC 62056-46, prepared by IEC TC 13,
Equipment for electrical energy measurement and load control, was submitted to the IEC-CENELEC
parallel vote and was approved by CENELEC as EN 62056-46 on 2002-03-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2003-01-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2005-05-01
The International Electrotechnical Commission (IEC) and CENELEC draw attention to the fact that it is
claimed that compliance with this International Standard / European Standard may involve the use of a
maintenance service concerning the stack of protocols on which the present standard IEC 62056-46 /
EN 62056-46 is based.
The IEC and CENELEC take no position concerning the evidence, validity and scope of this
maintenance service.
The provider of the maintenance service has assured the IEC that he is willing to provide services under
reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this
respect, the statement of the provider of the maintenance service is registered with the IEC. Information
may be obtained from:
1)
DLMS User Association
Geneva / Switzerland
www.dlms.ch
Annexes designated "normative" are part of the body of the standard.
Annexes designated "informative" are given for information only.
In this standard, annex ZA is no
...