iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

CLC/TS 50083-2-3:2018

(Main)

Cable networks for television signals, sound Signals and interactive services - Part 2-3: LTE (4G) Interference Mitigation Filters

Cable networks for television signals, sound Signals and interactive services - Part 2-3: LTE (4G) Interference Mitigation Filters

This Technical Specification provides requirements to passive filters intended to reduce RF interference from LTE Base Stations (LTE-BS) and LTE User Equipment (LTE-UE) to receiving equipment and cable distribution systems of broadcast DVB-T and DVB-T2 signals in the VHF and UHF bands. While primarily intended to be used with VHF/UHF DVB-T and DVB-T2 receivers and signal distribution systems, filters can also be useful for mitigation of interference to VHF FM or DAB radio.

Kabelnetze für Fernsehsignale, Tonsignale und interaktive Dienste - Teil 2-3: LTE (4G)-Filter zur Abschwächung von Störungen

Réseaux de distribution par câbles pour signaux de télévision, signaux de radiodiffusion sonore et services interactifs - Partie 2-3 : Filtres d’atténuation du brouillage pour les réseaux LTE (4G)

Kabelska omrežja za televizijske signale, zvokovne signale in interaktivne storitve - 2-3. del: Filter LTE (4G) za preprečevanje motenj

Ta tehnična specifikacija določa zahteve za pasivne filtre za zmanjšanje RF-motenj pri sprejemni opremi in kabelskih razdelilnih sistemih za radiodifuzijo signalov DVB-T in DVB-T2 v pasovih VHF in UHF, ki jih povzročajo bazne postaje LTE (LTE-BS) in uporabniška oprema LTE (LTE-UE). Medtem ko se filtri uporabljajo predvsem s sprejemniki VHF/UHF DVB-T in DVB-T2 ter sistemi za razdelitev signalov, so lahko uporabni tudi za preprečevanju motenj pri radijskih signalih VHF FM ali DAB.

General Information

Status
Published
Publication Date
15-Mar-2018
ICS
33.060.40 - Cabled distribution systems
Technical Committee
CLC/TC 209 - Cable networks for television signals, sound signals and interactive services
Drafting Committee
CLC/TC 209 - Cable networks for television signals, sound signals and interactive services
Current Stage
6060 - Document made available - Publishing
Start Date
16-Mar-2018
Due Date
23-Dec-2018
Completion Date
16-Mar-2018
Directive
2014/30/EU - Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast)
Ref Project
SIST-TS CLC/TS 50083-2-3:2019 - Cable networks for television signals, sound Signals and interactive services - Part 2-3: LTE (4G) Interference Mitigation Filters

Buy Standard

TS CLC/TS 50083-2-3:2019 - BARVETS CLC/TS 50083-2-3:2019 - BARVE
PreviousNext
Technical specification
TS CLC/TS 50083-2-3:2019 - BARVE
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CLC/TS 50083-2-3:2019
01-januar-2019
.DEHOVNDRPUHåMD]DWHOHYL]LMVNHVLJQDOH]YRNRYQHVLJQDOHLQLQWHUDNWLYQHVWRULWYH
GHO)LOWHU/7( * ]DSUHSUHþHYDQMHPRWHQM
Cable networks for television signals, sound Signals and interactive services - Part 2-3:
LTE (4G) Interference Mitigation Filters
Kabelnetze für Fernsehsignale, Tonsignale und interaktive Dienste - Teil 2-3: LTE (4G)
Filter zur Vermeidung von Störungen
Réseaux de distribution par câbles pour signaux de télévision, signaux de radiodiffusion
sonore et services interactifs - Partie 2-3 : Filtres d'atténuation du brouillage pour les
réseaux LTE (4G)
Ta slovenski standard je istoveten z: CLC/TS 50083-2-3:2018
ICS:
33.060.40 Kabelski razdelilni sistemi Cabled distribution systems
SIST-TS CLC/TS 50083-2-3:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS CLC/TS 50083-2-3:2019

---------------------- Page: 2 ----------------------

SIST-TS CLC/TS 50083-2-3:2019


TECHNICAL SPECIFICATION CLC/TS 50083-2-3

SPÉCIFICATION TECHNIQUE

TECHNISCHE SPEZIFIKATION
March 2018
ICS 33.060.40

English Version
Cable networks for television signals, sound Signals and
interactive services - Part 2-3: LTE (4G) Interference Mitigation
Filters
Réseaux de distribution par câbles pour signaux de Kabelnetze für Fernsehsignale, Tonsignale und interaktive
télévision, signaux de radiodiffusion sonore et services Dienste - Teil 2-3: LTE (4G) Filter zur Vermeidung von
interactifs - Partie 2-3 : Filtres d'atténuation du brouillage Störungen
pour les réseaux LTE (4G)
This Technical Specification was approved by CENELEC on 2017-12-25.

CENELEC members are required to announce the existence of this TS in the same way as for an EN and to make the TS available promptly
at national level in an appropriate form. It is permissible to keep conflicting national standards in force.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. CLC/TS 50083-2-3:2018 E

---------------------- Page: 3 ----------------------

SIST-TS CLC/TS 50083-2-3:2019
CLC/TS 50083-2-3:2018 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms, definitions and abbreviations . 5
3.1 Terms and definitions . 5
3.2 Abbreviations . 6
4 LTE Filter Characteristics . 6
4.1 General . 6
4.2 Pass-band and stop-band of a LTE filter (800 MHz band) . 6
4.3 Types of standard for a LTE filter . 7
4.4 LTE filter specifications . 7
4.5 Connections, EMC, environmental and other factors . 8
4.5.1
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 60728-113:2023(Main)
Cable networks for television signals, sound signals and interactive services - Part 113: Optical systems for broadcast signal transmissions loaded with digital channels only
SIST EN IEC 60728-113:2024

IEC 60728-113:2023 is applicable to optical transmission systems for broadcast signal transmission that consist of headend equipment, optical transmission lines, in-house wirings and system outlets. These systems are primarily intended for television and sound signals using digital transmission technology. This document specifies the basic system parameters and methods of measurement for optical distribution systems between headend equipment and system outlets in order to assess the system performance and its performance limits. In this document, the upper signal frequency is limited to about 3 300 MHz. The purpose of this part of IEC 60728 is to describe the system specifications of FTTH (fibre to the home) networks for digitally modulated broadcast signal transmission. This document is also applicable to broadcast signal transmission using a telecommunication network if it satisfies the performance of the optical portion of the system defined in this document. This document describes RF transmission for fully digitalized broadcast and narrowcast (limited area distribution of broadcast) signals over FTTH, and introduces the xPON system as a physical layer media. The detailed description of the physical layer is out of scope of this document. The scope is limited to downstream RF video signal transmission over FTTH; IP transport technologies, such as IP Multicast and associate protocols, which require a two-way optical transmission system, are out of scope of this document. Some interference effects occurring between the telecommunication system and the broadcast system are addressed in Clause 7. IEC 60728-113:2023 cancels and replaces the first edition published in 2018 and IEC 60728-13-1:2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) IEC 60728-13-1, which deals with the bandwidth expansion for broadcast signal over FTTH systems, has been merged with this document; b) a table containing the digital signal level at the system outlet has been added.

  • Standard
    107 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60728-106:2023(Main)
Cable networks for television signals, sound signals and interactive services - Part 106: Optical equipment for systems loaded with digital channels only
SIST EN IEC 60728-106:2024

IEC 60728-106:2023 lays down the measuring methods, performance requirements and data publication requirements of optical equipment of cable networks for television signals, sound signals and interactive services loaded with digital channels only. This document • applies to all optical transmitters, receivers, amplifiers, directional couplers, isolators, multiplexing devices, connectors and splices used in cable networks; • covers the frequency range 5 MHz to 3 300 MHz; • identifies guaranteed performance requirements for certain parameters; • lays down data publication requirements with guaranteed performance; • describes methods of measurement for compliance testing. All requirements and published data relate to minimum performance levels within the specified frequency range and in well-matched conditions as might be applicable to cable networks for television signals, sound signals and interactive services.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60728-11:2023(Main)
Cable networks for television signals, sound signals and interactive services - Part 11: Safety
SIST EN IEC 60728-11:2024

This part of IEC 60728 deals with the safety requirements applicable to fixed sited systems and equipment. As far as applicable, it is also valid for mobile and temporarily installed systems, for example, caravans. Additional requirements may be applied, for example, referring to: • electrical installations of buildings and overhead lines, • other telecommunication services distribution systems, • water distribution systems, • gas distribution systems, • lightning systems. This document is intended to provide requirements specifically for the safety of the system, personnel working on it, subscribers and subscriber equipment. It deals only with safety aspects and is not intended to define a standard for the protection of the equipment used in the system.

  • Standard
    96 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60728-115:2022(Main)
Cable networks for television signals, sound signals and interactive services - Part 115: In-building optical systems for broadcast signal transmissions
SIST EN IEC 60728-115:2022

This part of IEC 60728 is applicable to in-building optical transmission systems for broadcast signal transmission that consist of optical transmitter, optical amplifiers, splitters, V-ONUs, etc. These systems are primarily intended for television and sound signals using digital transmission technology. This document specifies the basic system parameters and methods of measurement for in-building optical distribution systems between building network interface (BNI) and home network interface (HNI) in order to assess the system performance and its performance limits. This document is also applicable to broadcast signal transmission using a telecommunication network if it satisfies the requirements of optical section of this document. This document describes RF transmission for fully digitalized broadcast and narrowcast (limited area distribution of broadcast) signals over an FTTH network and introduces xPON system as a physical layer media. The detailed description of the physical layer is out of the scope of this document. The scope is limited to RF signal transmission over optical network, thus, it does not include IP transport technologies, such as IP Multicast and associate protocols. This standard specifies the required system performance of all-optical building networks in order to connect with FTTH networks which are defined by IEC60728-113 and IEC60728-13-1. Use of In-building optical networks is very effective for saving cost (installation and maintenance) and enabling future network up-grades, especially in huge apartment buildings. In this document, the optical wavelengths and electrical frequency bands listed in Table 1 - and Table 2 - are considered to be used. [Table 1 and Table 2]

  • Standard
    70 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50083-2-4:2019(Main)
Cable networks for television signals, sound signals and interactive services - Part 2-4: Interference Mitigation Filters operating in the 700 MHz and 800 MHz bands for DTT reception
SIST EN 50083-2-4:2020

This document provides requirements for passive filters intended to reduce RF interference from mobile Base Stations (BS) and User Equipment (UE) to receiving equipment and master antenna cable distribution systems of broadcast DVB-T and DVB-T2 signals in the VHF and UHF bands. While primarily intended to be used with VHF/UHF DVB-T and DVB-T2 receivers and signal distribution systems, filters can also be useful for mitigation of interference to VHF FM or DAB radio.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60728-113:2018/AC:2018-12(Corrigendum)
Cable networks for television signals, sound signals and interactive services - Part 113: Optical systems for broadcast signal transmissions loaded with digital channels only
SIST EN IEC 60728-113:2019/AC:2019

IEC - Corrected version

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60728-11:2017/A11:2018(Amendment)
Cable networks for television signals, sound signals and interactive services - Part 11: Safety
SIST EN 60728-11:2018/A11:2019

contains Common Modifications to IEC 60728-11:2016 (the RD for EN 60728-11:2017) in response to the comments raised by the LVD New Approach Consultant in his negative assessment of IEC 60728-11.

  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60728-113:2018(Main)
Cable networks for television signals, sound signals and interactive services - Part 113: Optical systems for broadcast signal transmissions loaded with digital channels only
SIST EN IEC 60728-113:2019

IEC 60728-113:2018 is applicable to optical transmission systems for broadcast signal transmission that consist of headend equipment, optical transmission lines, in-house wirings and system outlets. These systems are primarily intended for television and sound signals using digital transmission technology. This document specifies the basic system parameters and methods of measurement for optical distribution systems between headend equipment and system outlets in order to assess the system performance and its performance limits. In this document, the upper signal frequency is limited at about 1 000 MHz. For systems requiring more bandwidth, refer to IEC 60728-13-1. The purpose of this part of IEC 60728 is to describe the system specifications of FTTH (fibre to the home) networks for digitally modulated broadcast signal transmission. This document is also applicable to broadcast signal transmission using a telecommunication network if it satisfies the optical portion of this document. This document describes RF transmission for fully digitalized broadcast and narrowcast (limited area distribution of broadcast) signals over FTTH, and introduces xPON system as a physical layer media. The detailed description of the physical layer is out of the scope of this document. The scope is limited to RF signal transmission over FTTH, thus, it does not include IP transport technologies, such as IP Multicast and associate protocols. Some interference descriptions between the telecommunication system and the broadcast system are addressed in Clause 7.

  • Standard
    90 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60728-3:2018(Main)
Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for cable networks (TA 5)
SIST EN IEC 60728-3:2018

NEW!IEC 60728-3:2017 is available as IEC 60728-3:2017 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60728-3:2017 specifies the measuring methods, performance requirements and data publication requirements for active wideband equipment of cable networks for television signals, sound signals and interactive services. This fifth edition cancels and replaces the fourth edition published in 2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) extension of upper frequency range limit for cable network equipment in the forward path from 1 000 MHz to 1 218 MHz (optional up to 1 794 MHz); b) extension of upper frequency range limit for cable network equipment in the return path from 85 MHz to 204 MHz; c) integration and update of IEC 60728-3-1 content; d) integration and update of the Technical Specification CLC/TS 50083-3-3 content; e) deletion of specifications and test methods for obsolete analogue parameters; f) additional normative references; g) additional terms and definitions and abbreviations.

  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60728-11:2017(Main)
Cable networks for television signals, sound signals and interactive services - Part 11: Safety
SIST EN 60728-11:2018

IEC 60728-11:2016 deals with the safety requirements applicable to fixed sited systems and equipment. As far as applicable, it is also valid for mobile and temporarily installed systems, for example, caravans. This fourth edition cancels and replaces the third edition published in 2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - Correction of minimum cross-section of bonding conductor in Figure 6, Figure 14 and Figure 17. - Creation of new symbols for "overvoltage protective device - (OPD)" and for "coaxial overvoltage protective device - (COPD)". - Introduction of new OPD symbol to 3.2, Figure 3 and Figure 6. - Introduction of new COPD symbol to 3.2 and Figure 19. - In 3.1 replacement of terms CATV, MATV and SMATV by new terms and definitions due to changes in technology and use of cable networks. - Extension for remote feeding voltage on subscriber feeder. - Adaption to Edition 2.0 of the IEC 62305 series. - Deletion of informative Annex C and normative reference to the simplified software for the calculation of risk due to lightning (Annex J of IEC 62305-2:2006.) - New subclause 10.2.6 Fully-isolated system outlet provided by means of a FTTH system.

  • Standard
    94 pages
    English language
    sale 10% off
    e-Library read for
    1 day