EN IEC 60309-1:2022
(Main)Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 1: General requirements
Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 1: General requirements
IEC 60309-1:2021 applies to plugs, fixed or portable socket-outlets and appliance inlets hereinafter referred to as accessories, with a rated operating voltage not exceeding 1 000 V DC or 1 000 V AC with a frequency not exceeding 500 Hz and a rated current not exceeding 800 A, primarily intended for industrial use, either indoors or outdoors. This fifth edition cancels and replaces the fourth edition published in 1999, Amendment 1:2005 and Amendment 2:2012. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
addition of classification, requirements and tests for accessories with shutters;
additional marking to indicate neutral terminal and/or earthing terminal;
replacement of the term "connector" by the term "portable socket-outlet".
Stecker, ortsfeste oder ortsveränderliche Steckdosen und Gerätestecker für industrielle Anwendungen - Teil 1: Allgemeine Anforderungen
Fiches, socles fixes de prise de courant, prises mobiles et socles de connecteur pour usages industriels - Partie 1: Exigences générales
L'IEC 60309-1:2021 s’applique aux fiches, socles fixes de prise de courant, prises mobiles et socles de connecteur, ci-après désignés par le terme les "appareils", de tension nominale d’emploi ne dépassant pas 1 000 V en courant continu ou 1 000 V en courant alternatif, de fréquence ne dépassant pas 500 Hz, et de courant nominal ne dépassant pas 800 A, destinés essentiellement aux usages industriels, à l’intérieur ou à l’extérieur des bâtiments. Cette cinquième édition annule et remplace la quatrième édition parue en 1999, son Amendement 1:2005 et son Amendement 2:2012. Elle constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente:
ajout d'une classification, d’exigences et d’essais relatifs aux appareils équipés d’obturateurs;
marquage supplémentaire pour indiquer la borne du neutre et/ou la borne de terre;
remplacement du terme "connecteur" par le terme "prise mobile".
Vtiči, fiksne ali prenosne vtičnice in aparatne spojke za industrijsko rabo - 1. del: Splošne zahteve (IEC 60309-1:2021)
Ta dokument se uporablja za vtiče, fiksne ali prenosne vtičnice in vtičnice aparatov (v nadaljevanju besedila: pribor) z nazivno obratovalno napetostjo, ki ne presega 1000 V enosmerne ali izmenične napetosti in frekvence 500 Hz, ter nazivnim tokom, ki ne presega 800 A, namenjene predvsem za industrijsko uporabo v notranjih prostorih ali na prostem.
Ta pribor je namenjen za namestitev s strani izključno usposobljenih ali kvalificiranih oseb. Seznam prednostnih nazivnih vrednosti ni namenjen izključitvi drugih nazivnih vrednosti.
Ta dokument se uporablja za pribor za uporabo pri temperaturi okolja med –25 °C in +40 °C.
Ta pribor se lahko priključi samo na kable z vodniki iz bakra ali bakrove zlitine. Ta dokument se uporablja za pribor z brezvijačnimi priključki ali priključki, ki predirajo izolacijo, z nazivnim tokom do vključno 32 A za serijo I in 30 A za serijo II.
Uporaba teh priključkov na gradbiščih ter za kmetijsko, komercialno ali domačo uporabo ni izključena.
Področje uporabe tega dokumenta zajema fiksne vtičnice ali vtičnice za aparate, ki so vgrajene v električno opremo ali so nanjo pritrjene. Ta dokument se uporablja tudi za pribor, namenjen uporabi pri izjemno nizkonapetostnih inštalacijah.
Ta dokument se ne uporablja za pribor, namenjen za domačo uporabo ali podobne splošne namene.
Ta dokument ne zajema enopolnega pribora.
Na mestih, kjer prevladujejo posebne okoliščine, na primer na ladji ali na mestih, kjer so možne eksplozije, so lahko potrebne dodatne zahteve.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2022
Nadomešča:
SIST EN 60309-1:2000
SIST EN 60309-1:2000/A1:2008
SIST EN 60309-1:2000/A1:2008/AC:2014
SIST EN 60309-1:2000/A11:2006
SIST EN 60309-1:2000/A2:2012
Vtiči, fiksne ali prenosne vtičnice in aparatne spojke za industrijsko rabo - 1. del:
Splošne zahteve (IEC 60309-1:2021)
Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part
1: General requirements (IEC 60309-1:2021)
Stecker, ortsfeste oder ortsveränderliche Steckdosen und Gerätestecker für industrielle
Anwendungen - Teil 1: Allgemeine Anforderungen (IEC 60309-1:2021)
Fiches, socles fixes de prise de courant, prises mobiles et socles de connecteur pour
usages industriels - Partie 1: Exigences générales (IEC 60309-1:2021)
Ta slovenski standard je istoveten z: EN IEC 60309-1:2022
ICS:
29.120.30 Vtiči, vtičnice, spojke Plugs, socket-outlets,
couplers
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 60309-1
NORME EUROPÉENNE
EUROPÄISCHE NORM June 2022
ICS 29.120.30 Supersedes EN 60309-1:1999 + A1:2007 + A2:2012 +
A1:2007/AC:2014
English Version
Plugs, fixed or portable socket-outlets and appliance inlets for
industrial purposes - Part 1: General requirements
(IEC 60309-1:2021)
Fiches, socles fixes de prise de courant, prises mobiles et Stecker, ortsfeste oder ortsveränderliche Steckdosen und
socles de connecteur pour usages industriels - Partie 1: Gerätestecker für industrielle Anwendungen - Teil 1:
Exigences générales Allgemeine Anforderungen
(IEC 60309-1:2021) (IEC 60309-1:2021)
This European Standard was approved by CENELEC on 2021-09-08. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60309-1:2022 E
European foreword
The text of document 23H/480/FDIS, future edition 5 of IEC 60309-1, prepared by SC 23H "Plugs,
Socket-outlets and Couplers for industrial and similar applications, and for Electric Vehicles" of
IEC/TC 23 "Electrical accessories" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 60309-1:2022.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022-12-17
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2025-06-17
document have to be withdrawn
This document supersedes EN 60309-1:1999 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a Standardization Request given to CENELEC by the
European Commission and the European Free Trade Association.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60309-1:2021 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60352-7 NOTE Harmonized as EN IEC 60352-7
IEC 60998-2-2 NOTE Harmonized as EN 60998-2-2
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60068-2-14 - Environmental testing - Part 2-14: Tests - EN 60068-2-14 -
Test N: Change of temperature
IEC 60068-2-78 - Environmental testing - Part 2-78: Tests - EN 60068-2-78 -
Test Cab: Damp heat, steady state
IEC/TR 60083 - Plugs and socket-outlets for domestic and - -
similar general use standardized in member
countries of IEC
IEC 60112 - Method for the determination of the proof EN IEC 60112 -
and the comparative tracking indices of
solid insulating materials
IEC 60227 series Polyvinyl chloride insulated cables of rated - -
voltages up to and including 450/750 V
IEC 60228 2004 Conductors of insulated cables EN 60228 2005
- - + corrigendum May 2005
IEC 60245-4 2011 Rubber insulated cables - Rated voltages - -
up to and including 450/750 V - Part 4:
Cords and flexible cables
IEC 60269-1 - Low-voltage fuses - Part 1: General EN 60269-1 -
requirements
IEC 60269-2 - Low-voltage fuses - Part 2: Supplementary HD 60269-2 -
requirements for fuses for use by authorized
persons (fuses mainly for industrial
application) - Examples of standardized
systems of fuses A to K
IEC 60309-4 2021 Plugs, fixed or portable socket-outlets and EN IEC 60309-4 2021
appliance inlets for industrial purposes -
Part 4: Switched socket-outlets with or
without interlock
IEC 60320 series Appliance couplers for household and - -
similar general purposes
Publication Year Title EN/HD Year
IEC 60417 - Graphical symbols for use on equipment. - -
Index, survey and compilation of the single
sheets.
IEC 60529 1989 Degrees of protection provided by EN 60529 1991
enclosures (IP Code)
- - + corrigendum May 1993
+ A1 1999 + A1 2000
+ A2 2013 + A2 2013
IEC 60664-1 2020 Insulation coordination for equipment within EN IEC 60664-1 2020
low-voltage supply systems - Part 1:
Principles, requirements and tests
IEC 60664-3 - Insulation coordination for equipment within EN 60664-3 -
low-voltage systems - Part 3: Use of
coating, potting or moulding for protection
against pollution
IEC 60695-2-11 - Fire hazard testing - Part 2-11: Glowing/hot- EN IEC 60695-2-11 -
wire based test methods - Glow-wire
flammability test method for end products
(GWEPT)
IEC 60695-10-2 - Fire hazard testing - Part 10-2: Abnormal EN 60695-10-2 -
heat - Ball pressure test method
IEC 61000-6-2 - Electromagnetic compatibility (EMC) - Part EN IEC 61000-6-2 -
6-2: Generic standards - Immunity standard
for industrial environments
IEC 61000-6-3 - Electromagnetic compatibility (EMC) - Part EN IEC 61000-6-3 -
6-3: Generic standards - Emission standard
for equipment in residential environments
IEC 61032 - Protection of persons and equipment by EN 61032 -
enclosures - Probes for verification
ISO 1456 - Metallic and other inorganic coatings - EN ISO 1456 -
Electrodeposited coatings of nickel, nickel
plus chromium, copper plus nickel and of
copper plus nickel plus chromium
ISO 2081 - Metallic and other inorganic coatings - EN ISO 2081 -
Electroplated coatings of zinc with
supplementary treatments on iron or steel
ISO 2093 - Electroplated coatings of tin; Specification - -
and test methods
IEC 60309-1 ®
Edition 5.0 2021-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Plugs, fixed or portable socket-outlets and appliance inlets for industrial
purposes –
Part 1: General requirements
Fiches, socles fixes de prise de courant, prises mobiles et socles de
connecteur pour usages industriels –
Partie 1: Exigences générales
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.120.30 ISBN 978-2-8322-9841-1
– 2 – IEC 60309-1:2021 © IEC 2021
CONTENTS
FOREWORD . 5
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 9
4 General . 16
4.1 General requirements . 16
4.2 General notes on tests . 16
5 Standard ratings . 17
6 Classification of accessories . 17
7 Marking . 18
8 Dimensions. 22
9 Protection against electric shock . 23
10 Provision for earthing . 27
11 Terminals and terminations . 27
11.1 Common requirements for terminals and terminations . 27
11.2 Screw type terminals . 31
11.3 Screwless type terminals . 34
11.4 Insulation piercing terminals (IPT) . 38
11.5 Mechanical tests on terminals . 39
11.6 Voltage drop test for screwless type terminals and for insulation piercing
terminals . 42
11.7 Tests for insulation piercing terminals transmitting contact pressure via
insulating parts . 44
11.7.1 Temperature-cycling test . 44
11.7.2 Short-time withstand current test . 44
12 Interlocks . 44
13 Resistance to ageing of rubber and thermoplastic material . 45
14 Construction . 45
14.1 General construction . 45
14.2 Construction of contacts . 46
15 Construction of fixed socket-outlets . 46
16 Construction of plugs and portable socket-outlets . 48
17 Construction of appliance inlets . 49
18 Degrees of protection . 49
19 Insulation resistance and dielectric strength . 50
20 Breaking capacity . 52
21 Normal operation . 54
22 Temperature
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.