Electromagnetic compatibility (EMC) - Part 4-3 : Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test

IEC 61000-4-3:2020 is applicable to the immunity requirements of electrical and electronic equipment to radiated electromagnetic energy. It establishes test levels and the required test procedures. The object of this document is to establish a common reference for evaluating the immunity of electrical and electronic equipment when subjected to radiated, radio-frequency electromagnetic fields. The test method documented in this part of IEC 61000 describes a consistent method to assess the immunity of an equipment or system against RF electromagnetic fields from RF sources not in close proximity to the EUT. The test environment is specified in Clause 6. NOTE 1 As described in IEC Guide 107, this is a basic EMC publication for use by product committees of the IEC. As also stated in Guide 107, the IEC product committees are responsible for determining whether this immunity test standard should be applied or not, and if applied, they are responsible for determining the appropriate test levels and performance criteria. TC 77 and its sub-committees are prepared to co-operate with product committees in the evaluation of the value of particular immunity tests for their products. NOTE 2 Immunity testing against RF sources in close proximity to the EUT is defined in IEC 61000-4-39. Particular considerations are devoted to the protection against radio-frequency emissions from digital radiotelephones and other RF emitting devices. NOTE 3 Test methods are defined in this part for evaluating the effect that electromagnetic radiation has on the equipment concerned. The simulation and measurement of electromagnetic radiation is not adequately exact for quantitative determination of effects. The test methods defined in this basic document have the primary objective of establishing an adequate reproducibility of testing configuration and repeatability of test results at various test facilities. This document is an independent test method. It is not possible to use other test methods as substitutes for claiming compliance with this document. This fourth edition cancels and replaces the third edition published in 2006, Amendment 1:2007 and Amendment 2:2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - testing using multiple test signals has been described; - additional information on EUT and cable layout has been added; - the upper frequency limitation has been removed to take account of new services; - the characterization of the field as well as the checking of power amplifier linearity of the immunity chain are specified.

Elektromagnetische Verträglichkeit (EMV) - Teil 4-3: Prüf- und Messverfahren - Prüfung der Störfestigkeit gegen hochfrequente elektromagnetische Felder

Compatibilité électromagnétique (CEM) - Partie 4-3 : Techniques d'essai et de mesure - Essai d'immunité aux champs électromagnétiques rayonnés aux fréquences radioélectriques

IEC 61000-4-3:2020 traite des exigences d'immunité des matériels électriques et électroniques à l'énergie électromagnétique rayonnée. Elle définit les niveaux d'essai et les procédures d'essai exigés. Le présent document a pour objet d'établir une référence commune d'évaluation des performances en matière d’immunité des matériels électriques et électroniques soumis à des champs électromagnétiques aux fréquences radioélectriques. La méthode d'essai documentée dans la présente partie de l’IEC 61000 décrit une méthode cohérente d’évaluation de l'immunité d'un équipement ou d'un système aux champs électromagnétiques à fréquences radioélectriques générés par des sources de rayonnement aux fréquences radioélectriques qui ne se trouvent pas à proximité immédiate de l’EUT. L’environnement d’essai est spécifié à l’Article 6. NOTE 1 Comme cela est décrit dans le Guide IEC 107, cette publication est une publication fondamentale en CEM destinée à être utilisée par les comités de produits de l’IEC. Comme cela est également indiqué dans le Guide 107, les comités de produits de l’IEC sont responsables de déterminer s’il convient d’appliquer ou non la présente norme d’essai d’immunité et, si c’est le cas, ils sont responsables de déterminer les niveaux d’essai et les critères de performance appropriés. Le comité d’études 77 et ses sous-comités sont prêts à coopérer avec les comités de produits à l’évaluation de la valeur des essais d’immunité particuliers pour leurs produits. NOTE 2 Les essais d’immunité aux sources de rayonnement aux fréquences radioélectriques à proximité de l’EUT sont définis dans l’IEC 61000-4-39. Des considérations particulières sont consacrées à la protection contre les émissions aux fréquences radioélectriques des radiotéléphones numériques et d'autres dispositifs d'émission RF. NOTE 3 La présente partie définit des méthodes d'essai pour évaluer l'incidence des rayonnements électromagnétiques sur le matériel concerné. La simulation et le mesurage des rayonnements électromagnétiques ne sont pas suffisamment exacts pour déterminer quantitativement les effets. Les méthodes d'essai définies dans le présent document fondamental ont été principalement mises au point pour obtenir une bonne reproductibilité de la configuration des essais et une bonne répétabilité des résultats d’essai sur différentes installations d'essai. Le présent document présente une méthode d'essai indépendante. Il n'est pas possible d'utiliser d'autres méthodes d'essai comme variantes pour se conformer au présent document. Cette quatrième édition annule et remplace la troisième édition parue en 2006, l'Amendement 1:2007 et l'Amendement 2:2010. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente.
description des essais qui utilisent des signaux d’essai multiples;
ajout d’informations supplémentaires sur l’EUT et la disposition des câbles;
la limitation en matière de fréquences supérieures a été supprimée pour tenir compte des nouveaux services;
la caractérisation du champ ainsi que la vérification de la linéarité de l’amplificateur de puissance de la chaîne d'immunité sont spécifiées.

Elektromagnetna združljivost (EMC) - 4-3. del: Preskusne in merilne tehnike - Preskušanje odpornosti proti sevanim radiofrekvenčnim elektromagnetnim poljem

General Information

Status
Published
Publication Date
29-Oct-2020
Current Stage
6060 - Document made available - Publishing
Start Date
30-Oct-2020
Completion Date
30-Oct-2020

Relations

Buy Standard

Standard
EN IEC 61000-4-3:2021 - BARVE
English language
84 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 61000-4-3:2021
01-januar-2021
Nadomešča:
SIST EN 61000-4-3:2006
SIST EN 61000-4-3:2006/A1:2008
SIST EN 61000-4-3:2006/A2:2011
SIST EN 61000-4-3:2006/IS1:2009
Elektromagnetna združljivost (EMC) - 4-3. del: Preskusne in merilne tehnike -
Preskušanje odpornosti proti sevanim radiofrekvenčnim elektromagnetnim poljem
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques -
Radiated, radiofrequency, electromagnetic field immunity test
Elektromagnetische Verträglichkeit (EMV) - Teil 4-3: Prüf- und Messverfahren - Prüfung
der Störfestigkeit gegen hochfrequente elektromagnetische Felder
Compatibilité électromagnétique (CEM) - Partie 4-3 : Techniques d'essai et de mesure -
Essai d'immunité aux champs électromagnétiques rayonnés aux fréquences
radioélectriques
Ta slovenski standard je istoveten z: EN IEC 61000-4-3:2020
ICS:
33.100.20 Imunost Immunity
SIST EN IEC 61000-4-3:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 61000-4-3:2021

---------------------- Page: 2 ----------------------
SIST EN IEC 61000-4-3:2021


EUROPEAN STANDARD EN IEC 61000-4-3

NORME EUROPÉENNE

EUROPÄISCHE NORM
October 2020
ICS 33.100.20 Supersedes EN 61000-4-3:2006, EN 61000-4-
3:2006/IS1:2009 and all of its amendments and corrigenda
(if any)
English Version
Electromagnetic compatibility (EMC) - Part 4-3 : Testing and
measurement techniques - Radiated, radio-frequency,
electromagnetic field immunity test
(IEC 61000-4-3:2020)
Compatibilité électromagnétique (CEM) - Partie 4-3 : Elektromagnetische Verträglichkeit (EMV) - Teil 4-3: Prüf-
Techniques d'essai et de mesure - Essai d'immunité aux und Messverfahren - Prüfung der Störfestigkeit gegen
champs électromagnétiques rayonnés aux fréquences hochfrequente elektromagnetische Felder
radioélectriques (IEC 61000-4-3:2020)
(IEC 61000-4-3:2020)
This European Standard was approved by CENELEC on 2020-10-13. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 61000-4-3:2020 E

---------------------- Page: 3 ----------------------
SIST EN IEC 61000-4-3:2021
EN IEC 61000-4-3:2020 (E)
European foreword
The text of document 77B/830/FDIS, future edition 4 of IEC 61000-4-3, prepared by SC 77B "High
frequency phenomena" of IEC/TC 77 "Electromagnetic compatibility" was submitted to the IEC-
CENELEC parallel vote and approved by CENELEC as EN IEC 61000-4-3:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-07-13
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-10-13
document have to be withdrawn
This document supersedes EN 61000-4-3:2006 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association.
Endorsement notice
The text of the International Standard IEC 61000-4-3:2020 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 61000-4 series NOT
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.