iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC SRD 63234-2:2020

(Main)

Economic evaluation of active assisted living services - Part 2: Example of use - Monitoring patients with chronic diseases

Economic evaluation of active assisted living services - Part 2: Example of use - Monitoring patients with chronic diseases

IEC SRD 63234-1:2020 provides a descriptive framework and template for the economic evaluation of the implementation of technology-supported home healthcare, wellness or AAL services. IEC SRD 63234-2:2020 provides an example of the use of the framework, specifically analysis and economic evaluation of the implementation of technology-supported, remote, in-home monitoring of patients (AAL care recipients) with chronic diseases.
This analysis is completed from the point of view of the healthcare system/services funder (e.g. the government in a state-sponsored healthcare system or possibly a health management/health insurance company in a privately funded system).
This document is structured like IEC SRD 63234-1:2020, to provide a means of capturing data for the Reference Scenario (the current means of providing care, also known as 'usual care', to the target population of members of the population with one or more chronic diseases living at home), compared against an Alternate Scenario (the deployment of an AAL service which provides remote patient monitoring). Standard economic measures have been estimated (using an electronic spreadsheet) including Return on Investment (ROI), Net Present Value (NPV), and Payback Period of the investment.

General Information

Status
Published
Publication Date
18-Feb-2020
ICS
01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
03.080 - Services
03.100.60 - Accountancy
Technical Committee
SyC AAL - Active Assisted Living
Drafting Committee
WG 4 - SyC AAL/WG 4
Current Stage
PPUB - Publication issued
Start Date
29-Jan-2020
Completion Date
19-Feb-2020
Ref Project

Buy Standard

IEC SRD 63234-2:2020 - Economic evaluation of active assisted living services - Part 2: Example of use - Monitoring patients with chronic diseasesIEC SRD 63234-2:2020 - Economic evaluation of active assisted living services - Part 2: Example of use - Monitoring patients with chronic diseases
PreviousNext
Standard
IEC SRD 63234-2:2020 - Economic evaluation of active assisted living services - Part 2: Example of use - Monitoring patients with chronic diseases
English language
23 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

IEC SRD 63234-2
®

Edition 1.0 2020-02
SYSTEMS
REFERENCE DELIVERABLE

colour
inside


Economic evaluation of active assisted living services –
Part 2: Example of use – Monitoring patients with chronic diseases
IEC SRD 63234-2:2020-02(en)

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2020 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.


IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland

About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.

need further assistance, please contact the Customer Service

Centre: sales@iec.ch.

---------------------- Page: 2 ----------------------
IEC SRD 63234-2

®


Edition 1.0 2020-02




SYSTEMS



REFERENCE DELIVERABLE








colour

inside










Economic evaluation of active assisted living services –

Part 2: Example of use – Monitoring patients with chronic diseases



























INTERNATIONAL

ELECTROTECHNICAL


COMMISSION





ICS 03.080; 03.100.60 ISBN 978-2-8322-7834-5




  Warning! Make sure that you obtained this publication from an authorized distributor.


® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 3 ----------------------
– 2 – IEC SRD 63234-2:2020 © IEC 2020
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms, definitions and abbreviated terms . 7
3.1 Terms and definitions. 7
3.2 Abbreviated terms . 8
4 General . 9
4.1 Document objective . 9
4.2 Economic evaluation process overview . 9
4.2.1 Alternate versus Reference Scenario . 9
4.2.2 Time period for analysis .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC SRD 63234-1:2020(Main)
Economic evaluation of active assisted living services - Part 1: Framework

IEC SRD 63234-1:2020 provides a descriptive framework and template for the economic evaluation of the implementation of technology-supported home healthcare or wellness services, or AAL services that support communications, transportation, etc. as defined in a series of AAL use cases. The financial analysis is completed from the point of view of the healthcare services funder, aged care services funder, or similar governmental or non-governmental organization (e.g. the government in a state-sponsored system or possibly a health management/health insurance company in a privately funded system, a private or governmental organization financing delivery of home support or specialized transportation services).
This document is structured to provide a means of capturing data for a Reference Scenario (typically the current means of providing care, often known as 'usual care', to the target patient population) to compare against an Alternate Scenario (the service or technology intervention) for an economic comparison. Standard economic measures can be estimated (using an electronic spreadsheet or other analysis tool) such as Return on Investment (ROI), Net Present Value (NPV), and Payback Period of the investment.
This document is applicable to all potential AAL services and AAL systems that may be developed or the development and manufacture of any of the underlying components (whether hardware or software).

  • Standard
    30 pages
    English language
    sale 15% off
IEC
IEC SRD 63234-1:2020(Main)
Economic evaluation of active assisted living services - Part 1: Framework

IEC SRD 63234-1:2020 provides a descriptive framework and template for the economic evaluation of the implementation of technology-supported home healthcare or wellness services, or AAL services that support communications, transportation, etc. as defined in a series of AAL use cases. The financial analysis is completed from the point of view of the healthcare services funder, aged care services funder, or similar governmental or non-governmental organization (e.g. the government in a state-sponsored system or possibly a health management/health insurance company in a privately funded system, a private or governmental organization financing delivery of home support or specialized transportation services).
This document is structured to provide a means of capturing data for a Reference Scenario (typically the current means of providing care, often known as 'usual care', to the target patient population) to compare against an Alternate Scenario (the service or technology intervention) for an economic comparison. Standard economic measures can be estimated (using an electronic spreadsheet or other analysis tool) such as Return on Investment (ROI), Net Present Value (NPV), and Payback Period of the investment.
This document is applicable to all potential AAL services and AAL systems that may be developed or the development and manufacture of any of the underlying components (whether hardware or software).

  • Standard
    30 pages
    English language
    sale 15% off
IEC
IEC 60601-2-35:2020(Main)
Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use

IEC 60601-2-35:2020 applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of HEATING DEVICES using BLANKETS, PADS or MATTRESSES in medical use, also referred to as ME EQUIPMENT. HEATING DEVICES intended to prewarm a bed are included in the scope of this document.
If a clause or subclause is specifically intended to be applicable to ME EQUIPMENT only, or to ME SYSTEMS only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME EQUIPMENT and to ME SYSTEMS, as relevant.
If a clause or subclause is specifically intended to be applicable to a specifically defined type of ME EQUIPMENT, as is the case with FORCED AIR DEVICES, then the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME EQUIPMENT and to ME SYSTEMS, as relevant.
HAZARDS inherent in the intended physiological function of ME EQUIPMENT or ME SYSTEMS within the scope of this document are not covered by specific requirements in this document, except in 7.2.13 and 8.4.1 of the general standard.
IEC 60601-2-35:2020 does not apply to:
- HEATING DEVICES intended for physiotherapy;
- INFANT RADIANT WARMERS; for information, see IEC 60601-2-21;
- INFANT INCUBATORS; for information, see IEC 60601-2-19;
- INFANT TRANSPORT INCUBATORS, for information, see IEC 60601-2-20;
- cooling devices.
IEC 60601-2-35:2020 cancels and replaces IEC 80601-2-35 published in 2009 and Amendment 1:2016. This edition constitutes a technical revision.
IEC 60601-2-35:2020 includes the following significant technical change with respect to the previous edition: re-dating of normative references.

  • Standard
    70 pages
    English language
    sale 15% off
  • Standard
    143 pages
    English and French language
    sale 15% off
IEC
IEC 63013:2017(Main)
LED packages - Long-term luminous and radiant flux maintenance projection

IEC 63013:2017 is applicable to LED packages for general lighting services.
It specifies procedures and conditions for measuring the luminous flux maintenance of LED packages. It also provides the procedures and conditions (criteria) of projecting the long-term luminous flux maintenance based on limited luminous flux maintenance test data collected. Within the context of this document, wherever luminous flux measurement data is specified, radiant flux measurement data can also be used.

  • Standard
    29 pages
    English and French language
    sale 15% off
  • Standard
    59 pages
    English and French language
    sale 15% off
IEC
IEC 61851-24:2023(Main)
Electric vehicle conductive charging system - Part 24: Digital communication between a DC EV supply equipment and an electric vehicle for control of DC charging

IEC 61851-24:2023, together with IEC 61851-23, applies to digital communication between a DC EV supply equipment and an electric road vehicle (EV) for control of conductive DC power transfer, with a rated supply voltage up to 1 000 V AC or up to 1 500 V DC and a rated output voltage up to 1 500 V DC.
This document also applies to digital communication between the DC EV charging/discharging station and the EV for system A, as specified in Annex A.
The EV charging mode is mode 4, according to IEC 61851-23.
Annex A, Annex B, and Annex C give descriptions of digital communications for control of DC charging specific to DC EV charging systems A, B and C as defined in IEC 61851-23.
This second edition cancels and replaces the first edition published in 2014. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
- Annex A and Annex B have been updated in line with IEC 61851-23:2023 and relevant standards.

  • Standard
    105 pages
    English and French language
    sale 15% off
IEC
IEC 61851-23:2023(Main)
Electric vehicle conductive charging system - Part 23: DC electric vehicle supply equipment

IEC 61851-23:2023 applies to the EV supply equipment to provide energy transfer between the supply network and electric vehicles (EVs), with a rated maximum voltage at side A of up to 1 000 V AC or up to 1 500 V DC and a rated maximum voltage at side B up to 1 500 V DC.
This document specifies the EV supply equipment of system A, system B and system C as defined in Annex AA, Annex BB and Annex CC. Other systems are under consideration.
This document provides the requirements for bidirectional power transfer (BPT) EV supply equipment for system A, with a rated maximum voltage at side A up to 1 000 V AC or 1 500 V DC. The requirements for reverse power transfer (RPT) and BPT for system B and system C are under consideration and are not specified in this document.
This second edition cancels and replaces the first edition published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) the structure has been rearranged according to IEC 61851-1:2017;
b) electrical safety requirements in Clause 8 and Clause 12 have been revised based on the requirements in IEC 62477-1 and inspired by the hazard based safety approach of IEC 62368-1;
c) test methods for checking conformity to the stated requirements have been mostly added; general provisions for compliance tests have been specified in Clause 102;
d) specific requirements and/or information for the following functions have been added: energy transfer with thermal management system (101.2), bi-directional power transfer control (Annex DD), multi- side B separated EV supply equipment (Annex FF), and communication and energy transfer process (Annex GG);
e) Annex AA (system A), Annex BB (system B) and Annex CC (system C) have been updated including additions in conjunction with b) and c). This document has been limited to be applicable to system A, system B and system C;
f) the former Annex DD and Annex EE have been deleted. A new Annex EE, with the requirements for the artificial test load, has been added.
g) a new informative annex for the touch current and the touch impulse current (Annex HH) has been added

  • Standard
    383 pages
    English language
    sale 15% off
IEC
IEC 62386-104:2019/AMD1:2023(Amendment)
Amendment 1 - Digital addressable lighting interface - Part 104: General requirements - Wireless and alternative wired system components
  • Standard
    6 pages
    English and French language
    sale 15% off
IEC
IEC 62977-2-11:2023(Main)
Electronic displays - Part 2-11: Measurement of optical characteristics - Local luminance and uniformity

IEC 62977-2-11:2023 specifies the local luminance and uniformity measurement methods of emissive displays. The light measuring device’s (LMD) measurement field will cover more than 500 pixels of TVs, monitors or signage displays. The local luminance and uniformity measurement methods identify optical variations within the local block where over 500 emission pixels are regularly placed.

  • Standard
    20 pages
    English language
    sale 15% off
IEC
IEC 60228:2023(Main)
Conductors of insulated cables

IEC 60228:2023 specifies the nominal cross-sectional areas, in the range 0,5 mm2 to 3 500 mm2, for conductors in electric power cables and cords of a wide range of types. Requirements for numbers and sizes of wires and resistance values are also included. These conductors include solid, stranded and Milliken, copper, aluminium and aluminium alloy conductors in cables for fixed installations and flexible copper conductors. This document does not apply to conductors for telecommunication purposes. The applicability of this document to a particular type of cable is as specified in the standard for the type of cable. Unless specified otherwise in a particular clause, IEC 60028 ED4 relates to the conductors in the finished cable and not to the conductor as made or supplied for inclusion into a cable. Conductors described in this document are specified in metric sizes. Informative annexes provide supplementary information covering temperature correction factors for resistance measurement (Annex B) and guidance on dimensional limits of circular conductors (Annex C). This document has the status of a horizontal publication in accordance with IEC Guide 108.

  • Standard
    70 pages
    English language
    sale 15% off
IEC
IEC 62056-6-1:2023(Main)
Electricity metering data exchange - The DLMS®/COSEM suite - Part 6-1: Object Identification System (OBIS)

IEC 62056-6-1:2023 is available as IEC 62056-6-1:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62056-6-1:2023 specifies the overall structure of the OBject Identification System (OBIS) and the mapping of all commonly used data items in metering equipment to their identification codes.OBIS provides a unique identifier for all data within the metering equipment, including not only measurement values, but also abstract values used for configuration or obtaining information about the behaviour of the metering equipment. The ID codes defined in this document are used for the identification of:
- logical names of the various instances of the ICs, or objects, as defined in IEC 62056‑6‑2:2023;
- data transmitted through communication lines;
- data displayed on the metering equipment, see Clause A.2 in Annex A.
This document applies to all types of metering equipment, such as fully integrated meters, modular meters, tariff attachments, data concentrators, etc.
To cover metering equipment measuring energy types other than electricity, combined metering equipment measuring more than one type of energy or metering equipment with several physical measurement channels, the concepts of medium and channels are introduced. This allows meter data originating from different sources to be identified. While this document fully defines the structure of the identification system for other media, the mapping of non-electrical energy related data items to ID codes is completed separately
This fourth edition cancels and replaces the third edition of IEC 62056-6-1, published in 2017. This edition constitutes a technical revision. The main technical changes with respect to the previous edition are listed in Annex B (informative).

  • Standard
    87 pages
    English and French language
    sale 15% off