ISO TS 80004-12:2016

Nanotechnologies - Vocabulary - Part 12: Quantum phenomena in nanotechnology

ISO/TS 80004-12:2016 lists terms and definitions relevant to quantum phenomena in nanotechnologies.
All of these terms are important for nanotechnologies, but it is to be noted that many of them are not exclusively relevant to the nanoscale and can also be used to some extent to refer to larger scales.
The list of terms presented does not claim to provide exhaustive coverage of the whole spectrum of quantum concepts and phenomena in nanotechnology. It covers important phenomena as acknowledged by many stakeholders from academia, industry, etc.
ISO/TS 80004-12:2016 is intended to facilitate communication between organizations and individuals in industry and those who interact with them.

Nanotechnologies - Vocabulaire - Partie 12: Phénomènes quantiques dans les nanotechnologies

ISO/TS 80004-12:2016 donne une liste de termes et définitions applicables aux phénomènes quantiques dans le domaine des nanotechnologies.
Tous ces termes sont importants pour les nanotechnologies, mais il faut noter qu'un grand nombre d'entre eux ne s'appliquent pas exclusivement à l'échelle nanométrique et peuvent également être utilisés dans une certaine mesure pour se référer à des échelles plus grandes.
La liste des termes présentés ne prétend pas assurer une couverture exhaustive de l'ensemble des concepts et phénomènes quantiques dans le domaine des nanotechnologies. Elle couvre les phénomènes reconnus comme importants par de nombreuses parties prenantes issues du monde universitaire, de l'industrie, etc.
ISO/TS 80004-12:2016 est destinée à faciliter la communication entre différents organismes et membres de l'industrie, et leurs interlocuteurs.

General Information

• Status: Published
• Publication Date: 16-Mar-2016
• ICS: 01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
• ICS: 01.040.07 - Natural and applied sciences (Vocabularies)
• ICS: 07.120 - Nanotechnologies
• Technical Committee: TC 113 - Nanotechnology for electrotechnical products and systems
• Drafting Committee: PT 80004-12 - TC 113/PT 80004-12
• Current Stage: PPUB - Publication issued
• Completion Date: 29-Jun-2023

Standards Content (Sample)

TECHNICAL ISO/TS
SPECIFICATION 80004-12
First edition
2016-03-15
Nanotechnologies — Vocabulary —
Part 12:
Quantum phenomena in
nanotechnology
Nanotechnologies — Vocabulaire —
Partie 12: Phénomènes quantiques dans les nanotechnologies
Reference number
ISO/TS 80004-12:2016(E)
©
ISO 2016

---------------------- Page: 1 ----------------------
ISO/TS 80004-12:2016(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2016 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/TS 80004-12:2016(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Terms describing (or related to) general quantum concepts . 1
3 Terms related to basic quantum effects . 3
4 Terms describing size-dependent quantum effects . 4
5 Terms related to structural organization . 5
6 Terms associated with quantum effects . 6
Annex A (informative) Some current terms in classical and quantum physics .8
Annex B (informative) Mapping between terms and some applications and products
in nanotechnologies . 9
Annex C (informative) Index .11
Bibliography .12
© ISO 2016 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/TS 80004-12:2016(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in t
...