IEC 60598-2-3:2002/AMD1:2011

Amendment 1 - Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting

Amendement 1 - Luminaires - Partie 2-3: Règles particulières - Luminaires d'éclairage public

General Information

• Status: Published
• Publication Date: 13-Apr-2011
• ICS: 01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
• ICS: 29.140.40 - Luminaires
• ICS: 93.080.30 - Road equipment and installations
• Technical Committee: SC 34D - Luminaires
• Drafting Committee: WG 1 - TC 34/SC 34D/WG 1
• Current Stage: PPUB - Publication issued
• Start Date: 15-Apr-2011
• Completion Date: 14-Apr-2011

Relations

• Amends: IEC 60598-2-3:2002 - Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC 60598-2-3 ®
Edition 3.0 2011-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Luminaires –
Part 2-3: Particular requirements – Luminaires for road and street lighting

Luminaires –
Partie 2-3: Règles particulières – Luminaires d'éclairage public

IEC 60598-2-3:2002/A1:2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: [e-mail]
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
 Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
 IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
 Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
 Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: [e-mail]
Tel.: [phone]
Fax: [phone]
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
 Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
 Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
 Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
 Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: [e-mail]
Tél.: [phone]
Fax: [phone]
IEC 60598-2-3 ®
Edition 3.0 2011-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Luminaires –
Part 2-3: Particular requirements – Luminaires for road and street lighting

Luminaires –
Partie 2-3: Règles particulières – Luminaires d'éclairage public

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE PRICE CODE
D
CODE PRIX
ICS 29.140.40; 93.080.30 ISBN 978-2-88912-457-2

– 2 – 60598-2-3 Amend. 1  IEC:2011
FOREWORD
This amendment has been prepared by subcommittee 34D: Luminaires, of IEC technical
committee 34: Lamps and related equipment.
The text of this amendment is based on the following documents:
FDIS Report on voting
34D/989/FDIS 34D/1003/RVD
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC web site under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
_____________
3.1.1 Normative references
Add the following new publication to the existing list:
IEC 62262: 2002, Degrees of protection provided by enclosures for electrical equipment
against external mechanical impacts (IK code)
3.5 Marking
Add the following new item i) to the existing list:
i) maximum mounting height relevant to the selected method for protection against the
falling of glass particles.
3.6.5
Replace the existing Subclause 3.6.5 with the following:
3.6.5 In order to reduce the risk of injury caused by breaking glass, the following
requirements, in relation to the intended mounting height of the luminaire, are applicable.
When luminaires are installed below 5 m, no additional requirements are requested on glass
covers.
For tunnel luminaries, the requirements of 3.6.5.1 apply without exception.

60598-2-3 Amend. 1  IEC:2011 – 3 –
When luminaires are installed above 5 m, glass covers shall be:
a) constituted with a glass that fractures into small pieces, or
b) constituted with a glass having a high impact shock resistance, or
c) protected by any means to retain glass fragments in case of breakage (e.g. guard, film
coating).
Compliance is checked:
– for a) by test and inspection according to 3.6.5.1;
– for b) by test and inspection according to 3.6.5.2;
– for c) by inspection.
The luminaire manufacturer shall declare to the testing laboratory the method of protection
used.
3.6.5.1 Protection by the use of glass that fractures into small pieces
Preconditioning of the luminaire and glass cover before testing is not required.
For flat glass, the glass component is supported over the whole area to ensure that particles
will not be scattered upon fragmentation and that movement of the particles is prevented.
Shatter the glass with a centre punch at a point 30 mm from the mid-point of one of the longer
edges of glass towards the centre.
NOTE 1 A centre punch is a tool made of steel with a sharp point.
For formed glass, the glass component part shall be supported on all the surfaces (example
of testing method could be the use of material like sand or a mould). The thickness of the
material used as a support surface shall be more than 30 mm. The face of the glass shall be
completely covered with an adhesive film in order to avoid any move of the broken particles.
Shatter the glass (from the inside or the outside) with a centre punch in the middle of the
glass cover.
Within 5 min of fracture, count the particles in a 50 mm square, located approximately at the
centre of the area of the coarsest fracture but always within the confines of the glass.
Compliance: A glass is deemed to have passed the test if the number of particles in the
50 mm square is more than 40; glass splinters and pieces less than the full thickness of the
glass being excluded from the count. For glass of smaller size where a 50 mm × 50 mm area
is not possible, the number of pieces necessary in the count is proportionately reduced. The
size of the particles shall be less than 50 mm for all the dimensions.
In the count of the total number of particles in the 50 mm square, the particles in the centre of
the square plus those at the edge shall be taken into account. In order to count particles at
the edge of the square, it is recommended that all pieces intersected by two adjacent sides be
included and al
...