iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 62309:2004

(Main)

Dependability of products containing reused parts - Requirements for functionality and tests

Dependability of products containing reused parts - Requirements for functionality and tests

Introduces the concept to check the reliability and functionality of reused parts and their usage within new products. Also provides information and criteria about the tests/analysis required for products containing such reused parts, which are declared "qualified-as-good-as-new" relative to the designed life of the product. The purpose of this standard is to ensure by tests and analysis that the reliability and functionality of a new product containing reused parts is comparable to a product with only new parts.

Sûreté de fonctionnement des produits contenant des composants réutilisés - Exigences pour la fonctionnalité et les essais

Introduit le concept de la vérification de la fiabilité et de la fonctionnalité des composants réutilisés et de leur utilisation dans des produits. Fournit aussi des informations et des critères pour les tests/analyses prescrits pour les produits contenant de tels composants réutilisés et qui sont déclarés qualifiés "bons comme neufs" relativement à la durée de vie conçue du produit. L'objet de la présente norme est d'assurer par des tests et des analyses que la fiabilité et la fonctionnalité des nouveaux produits contenant des composants réutilisés est comparable à celle d'un produit ne contenant que des composants neufs.

General Information

Status
Published
Publication Date
13-Jul-2004
ICS
01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
03.120.30 - Application of statistical methods
21.020 - Characteristics and design of machines, apparatus, equipment
Technical Committee
TC 56 - Dependability
Current Stage
PPUB - Publication issued
Start Date
31-Oct-2004
Completion Date
14-Jul-2004
Ref Project

Buy Standard

IEC 62309:2004 - Dependability of products containing reused parts - Requirements for functionality and testsIEC 62309:2004 - Dependability of products containing reused parts - Requirements for functionality and tests
PreviousNext
Standard
IEC 62309:2004 - Dependability of products containing reused parts - Requirements for functionality and tests
English and French language
39 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NORME CEI
INTERNATIONALE IEC
62309
INTERNATIONAL
Première édition
STANDARD
First edition
2004-07
Sûreté de fonctionnement des produits
contenant des composants réutilisés –
Exigences pour la fonctionnalité
et les essais
Dependability of products containing
reused parts –
Requirements for functionality
and tests
Numéro de référence
Reference number
CEI/IEC 62309:2004

---------------------- Page: 1 ----------------------
Numérotation des publications Publication numbering
Depuis le 1er janvier 1997, les publications de la CEI As from 1 January 1997 all IEC publications are
sont numérotées à partir de 60000. Ainsi, la CEI 34-1 issued with a designation in the 60000 series. For
devient la CEI 60034-1. example, IEC 34-1 is now referred to as IEC 60034-1.
Editions consolidées Consolidated editions
Les versions consolidées de certaines publications de la The IEC is now publishing consolidated versions of its
CEI incorporant les amendements sont disponibles. Par publications. For example, edition numbers 1.0, 1.1
exemple, les numéros d’édition 1.0, 1.1 et 1.2 indiquent and 1.2 refer, respectively, to the base publication,
respectivement la publication de base, la publication de the base publication incorporating amendment 1 and
base incorporant l’amendement 1, et la publication de the base publication incorporating amendments 1
base incorporant les amendements 1 et 2. and 2.
Informations supplémentaires Further information on IEC publications
sur les publications de la CEI
Le contenu technique des publications de la CEI est The technical content of IEC publications is kept
constamment revu par la CEI afin qu'il reflète l'état under constant review by the IEC, thus ensuring that
actuel de la technique. Des renseignements relatifs à the content reflects current technology. Information
cette publication, y compris sa validité, sont dispo- relating to this publication, including its validity, is
nibles dans le Catalogue des publications de la CEI available in the IEC Catalogue of publications
(voir ci-dessous) en plus des nouvelles éditions, (see below) in addition to new editions, amendments
amendements et corrigenda. Des informations sur les and corrigenda. Information on the subjects under
sujets à l’étude et l’avancement des travaux entrepris consideration and work in progress undertaken by the
par le comité d’études qui a élaboré cette publication, technical committee which has prepared this
ainsi que la liste des publications parues, sont publication, as well as the list of publications issued,
également disponibles par l’intermédiaire de: is also available from the following:
• Site web de la CEI (www.iec.ch) • IEC Web Site (www.iec.ch)
• Catalogue des publications de la CEI • Catalogue of IEC publications
Le catalogue en ligne sur le site web de la CEI The on-line catalogue on the IEC web site
(www.iec.ch/searchpub) vous permet de faire des (www.iec.ch/searchpub) enables you to search by a
recherches en utilisant de nombreux critères, variety of criteria including text searches,
comprenant des recherches textuelles, par comité technical committees and date of publication. On-
d’études ou date de publication. Des informations en line information is also available on recently
ligne sont également disponibles sur les nouvelles issued publications, withdrawn and replaced
publications, les publications remplacées ou retirées, publications, as well as corrigenda.
ainsi que sur les corrigenda.
• IEC Just Published • IEC Just Published
Ce résumé des dernières publications parues This summary of recently issued publications
(www.iec.ch/online_news/justpub) est aussi dispo- (www.iec.ch/online_news/justpub) is also available
nible par courrier électronique. Veuillez prendre by email. Please contact the Customer Service
contact avec le Service client (voir ci-dessous) Centre (see below) for further information.
pour plus d’informations.
• Service clients • Customer Service Centre
Si vous avez des questions au sujet de cette If you have any questions regarding this
publication ou avez besoin de renseignements publication or need further assistance, please
supplémentaires, prenez contact avec le Service contact the Customer Service Centre:
clients:
Email: custserv@iec.ch Email: custserv@iec.ch
Tél: +41 22 919 02 11 Tel: +41 22 919 02 11
Fax: +41 22 919 03 00 Fax: +41 22 919 03 00
.

---------------------- Page: 2 ----------------------
NORME CEI
INTERNATIONALE IEC
62309
INTERNATIONAL
Première édition
STANDARD
First edition
2004-07
Sûreté de fonctionnement des produits
contenant des composants réutilisés –
Exigences pour la fonctionnalité
et les essais
Dependability of products containing
reused parts –
Requirements for functionality
and test
© IEC 2004 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 61703:2016(Main)
Mathematical expressions for reliability, availability, maintainability and maintenance support terms

IEC 61703:2016 provides mathematical expressions for selected reliability, availability, maintainability and maintenance support measures defined in IEC 60050­192:2015. In addition, it introduces some terms not covered in IEC 60050-192:2015. They are related to aspects of the system of item classes (see hereafter). According to IEC 60050-192:2015, dependability [192-01-22] is the ability of an item to perform as and when required and an item [192-01-01] can be an individual part, component, device, functional unit, equipment, subsystem, or system. To account for mathematical constraints, this standard splits the items between the individual items considered as a whole (e.g. individual components) and the systems made of several individual items. It provides general considerations for the mathematical expressions for systems as well as individual items but the individual items which are easier to model are analysed in more detail with regards to their repair aspects. This standard is mainly applicable to hardware dependability, but many terms and their definitions may be applied to items containing software. This second edition cancels and replaces the first edition published in 2001. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- standard made as self containing as possible;
- item split between individual items and systems;
- generalization of the dependability concepts for systems made of several components [introduction of the conditional failure intensity (Vesely failure rate);
- introduction of the state-transition and the Markovian models;
- generalization of the availability to production availability];
- introduction of curves to illustrate the various concepts. Keywords: mathematical expressions for dependability

  • Standard
    209 pages
    English and French language
    sale 15% off
IEC
IEC 60300-3-12:2011(Main)
Dependability management - Part 3-12: Application guide - Integrated logistic support

IEC 60300-3-12:2011 is an application guide for establishing an integrated logistic support (ILS) management system. It is intended to be used by a wide range of suppliers including large and small companies wishing to offer a competitive and quality item which is optimized for the purchaser and supplier for the complete life cycle of the item. It also includes common practices and logistic data analyses that are related to ILS. This edition includes the following significant technical changes with respect to the previous edition:
- provision of a better overview of the whole ILS process;
- updating of the document to align with associated dependability standards that were introduced after the previous edition.

  • Standard
    104 pages
    English and French language
    sale 15% off
IEC
IEC 60300-3-1:2003(Main)
Dependability management - Part 3-1: Application guide - Analysis techniques for dependability - Guide on methodology

IEC 60300-3-1:2003 gives a general overview of commonly used dependability analysis techniques. It describes the usual methodologies, their advantages and disadvantages, data input and other conditions for using various techniques. This standard is an introduction to selected methodologies and is intended to provide the necessary information for choosing the most appropriate analysis methods. This second edition cancels and replaces the first edition, published in 1991, and constitutes a full technical revision. In particular, the guidance on the selection of analysis techniques and the number of analysis techniques covered has been extended. This bilingual version (2013-02) corresponds to the monolingual English version, published in 2003-01. Keywords: dependability analysis techniques

  • Standard
    126 pages
    English and French language
    sale 15% off
IEC
IEC 61703:2016(Main)
Mathematical expressions for reliability, availability, maintainability and maintenance support terms

IEC 61703:2016 provides mathematical expressions for selected reliability, availability, maintainability and maintenance support measures defined in IEC 60050­192:2015. In addition, it introduces some terms not covered in IEC 60050-192:2015. They are related to aspects of the system of item classes (see hereafter). According to IEC 60050-192:2015, dependability [192-01-22] is the ability of an item to perform as and when required and an item [192-01-01] can be an individual part, component, device, functional unit, equipment, subsystem, or system. To account for mathematical constraints, this standard splits the items between the individual items considered as a whole (e.g. individual components) and the systems made of several individual items. It provides general considerations for the mathematical expressions for systems as well as individual items but the individual items which are easier to model are analysed in more detail with regards to their repair aspects. This standard is mainly applicable to hardware dependability, but many terms and their definitions may be applied to items containing software. This second edition cancels and replaces the first edition published in 2001. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- standard made as self containing as possible;
- item split between individual items and systems;
- generalization of the dependability concepts for systems made of several components [introduction of the conditional failure intensity (Vesely failure rate);
- introduction of the state-transition and the Markovian models;
- generalization of the availability to production availability];
- introduction of curves to illustrate the various concepts. Keywords: mathematical expressions for dependability

  • Standard
    209 pages
    English and French language
    sale 15% off
IEC
IEC 60300-3-12:2011(Main)
Dependability management - Part 3-12: Application guide - Integrated logistic support

IEC 60300-3-12:2011 is an application guide for establishing an integrated logistic support (ILS) management system. It is intended to be used by a wide range of suppliers including large and small companies wishing to offer a competitive and quality item which is optimized for the purchaser and supplier for the complete life cycle of the item. It also includes common practices and logistic data analyses that are related to ILS. This edition includes the following significant technical changes with respect to the previous edition:
- provision of a better overview of the whole ILS process;
- updating of the document to align with associated dependability standards that were introduced after the previous edition.

  • Standard
    104 pages
    English and French language
    sale 15% off
IEC
IEC 60300-3-1:2003(Main)
Dependability management - Part 3-1: Application guide - Analysis techniques for dependability - Guide on methodology

IEC 60300-3-1:2003 gives a general overview of commonly used dependability analysis techniques. It describes the usual methodologies, their advantages and disadvantages, data input and other conditions for using various techniques. This standard is an introduction to selected methodologies and is intended to provide the necessary information for choosing the most appropriate analysis methods. This second edition cancels and replaces the first edition, published in 1991, and constitutes a full technical revision. In particular, the guidance on the selection of analysis techniques and the number of analysis techniques covered has been extended. This bilingual version (2013-02) corresponds to the monolingual English version, published in 2003-01. Keywords: dependability analysis techniques

  • Standard
    126 pages
    English and French language
    sale 15% off
IEC
IEC 62386-104:2019/AMD1:2023(Amendment)
Amendment 1 - Digital addressable lighting interface - Part 104: General requirements - Wireless and alternative wired system components
  • Standard
    6 pages
    English and French language
    sale 15% off
IEC
IEC 61851-24:2023(Main)
Electric vehicle conductive charging system - Part 24: Digital communication between a DC EV supply equipment and an electric vehicle for control of DC charging

IEC 61851-24:2023, together with IEC 61851-23, applies to digital communication between a DC EV supply equipment and an electric road vehicle (EV) for control of conductive DC power transfer, with a rated supply voltage up to 1 000 V AC or up to 1 500 V DC and a rated output voltage up to 1 500 V DC.
This document also applies to digital communication between the DC EV charging/discharging station and the EV for system A, as specified in Annex A.
The EV charging mode is mode 4, according to IEC 61851-23.
Annex A, Annex B, and Annex C give descriptions of digital communications for control of DC charging specific to DC EV charging systems A, B and C as defined in IEC 61851-23.
This second edition cancels and replaces the first edition published in 2014. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
- Annex A and Annex B have been updated in line with IEC 61851-23:2023 and relevant standards.

  • Standard
    105 pages
    English and French language
    sale 15% off
IEC
IEC 61851-23:2023(Main)
Electric vehicle conductive charging system - Part 23: DC electric vehicle supply equipment

IEC 61851-23:2023 applies to the EV supply equipment to provide energy transfer between the supply network and electric vehicles (EVs), with a rated maximum voltage at side A of up to 1 000 V AC or up to 1 500 V DC and a rated maximum voltage at side B up to 1 500 V DC.
This document specifies the EV supply equipment of system A, system B and system C as defined in Annex AA, Annex BB and Annex CC. Other systems are under consideration.
This document provides the requirements for bidirectional power transfer (BPT) EV supply equipment for system A, with a rated maximum voltage at side A up to 1 000 V AC or 1 500 V DC. The requirements for reverse power transfer (RPT) and BPT for system B and system C are under consideration and are not specified in this document.
This second edition cancels and replaces the first edition published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) the structure has been rearranged according to IEC 61851-1:2017;
b) electrical safety requirements in Clause 8 and Clause 12 have been revised based on the requirements in IEC 62477-1 and inspired by the hazard based safety approach of IEC 62368-1;
c) test methods for checking conformity to the stated requirements have been mostly added; general provisions for compliance tests have been specified in Clause 102;
d) specific requirements and/or information for the following functions have been added: energy transfer with thermal management system (101.2), bi-directional power transfer control (Annex DD), multi- side B separated EV supply equipment (Annex FF), and communication and energy transfer process (Annex GG);
e) Annex AA (system A), Annex BB (system B) and Annex CC (system C) have been updated including additions in conjunction with b) and c). This document has been limited to be applicable to system A, system B and system C;
f) the former Annex DD and Annex EE have been deleted. A new Annex EE, with the requirements for the artificial test load, has been added.
g) a new informative annex for the touch current and the touch impulse current (Annex HH) has been added

  • Standard
    383 pages
    English language
    sale 15% off
IEC
IEC 62977-2-11:2023(Main)
Electronic displays - Part 2-11: Measurement of optical characteristics - Local luminance and uniformity

IEC 62977-2-11:2023 specifies the local luminance and uniformity measurement methods of emissive displays. The light measuring device’s (LMD) measurement field will cover more than 500 pixels of TVs, monitors or signage displays. The local luminance and uniformity measurement methods identify optical variations within the local block where over 500 emission pixels are regularly placed.

  • Standard
    20 pages
    English language
    sale 15% off