ISO/IEC TR 63306-1:2020
(Main)Smart manufacturing standards map (SM2) - Part 1: Framework
Smart manufacturing standards map (SM2) - Part 1: Framework
ISO/IEC TR 63306-1:2020 This document describes the framework and the vocabulary that are used for the development of entries in the Smart Manufacturing Standards Map Catalogue. These enable the mapping and linking of standards and standard projects related to various aspects of smart manufacturing (product, production, supply chain, industrial services ...).
General Information
Standards Content (Sample)
ISO/IEC TR 63306-1
Edition 1.0 2020-12
TECHNICAL
REPORT
colour
inside
Smart manufacturing standards map (SM2) –
Part 1: Framework
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about
ISO/IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address
below or your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.
need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
ISO/IEC TR 63306-1
Edition 1.0 2020-12
TECHNICAL
REPORT
colour
inside
Smart manufacturing standards map (SM2) –
Part 1: Framework
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 25.040.01; 25.060.01; 01.040.25 ISBN 978-2-8322-9199-3
– 2 – ISO/IEC TR 63306-1:2020
ISO/IEC 2020
CONTENTS
FOREWORD . 8
INTRODUCTION . 10
1 Scope . 11
2 Normative references . 11
3 Terms and definitions . 11
4 Principle of the Smart Manufacturing Standards Map (SM2) . 11
4.1 Framework . 11
4.2 SM2 Catalogue . 12
4.3 Graphical representations . 14
5 Overview of the SM2 Vocabulary . 21
5.1 Summary of characteristics and blocks . 21
5.2 Values of the characteristics . 24
5.3 Qualifier . 24
6 Block "Identification" . 25
6.1 Composition . 25
6.2 Qualifier . 25
6.3 Sub-block "Reference" . 26
6.3.1 Characteristic "Status" . 26
6.3.2 Characteristic "Standard number" . 26
6.4 Sub-block "Publication" . 26
6.4.1 Characteristic "Edition" . 26
6.4.2 Characteristic "Publication date" . 26
6.5 Sub-block "Project" . 27
6.5.1 Characteristic "Project number" . 27
6.5.2 Characteristic "Forecast publication date" . 27
6.6 Sub-block "Owner" . 27
6.6.1 Characteristic "Organization" . 27
6.6.2 Characteristic "Committee number" . 27
6.6.3 Characteristic "Committee title" . 28
6.7 Sub-block "ICS" . 28
6.7.1 Characteristic "International Classification for Standards" . 28
6.7.2 Other characteristics . 29
6.8 Sub-block "Title" . 29
6.8.1 Characteristic "Standard title" . 29
6.8.2 Characteristic "Standard short title" . 29
7 Block "Object" . 30
7.1 Composition . 30
7.2 Qualifier . 30
7.3 Sub-block "Type of standard" . 30
7.3.1 Description . 30
7.3.2 Characteristics . 30
7.4 Sub-block "Type of object" . 32
7.4.1 Description . 32
7.4.2 Characteristics . 32
7.5 Sub-block "Manufacturing process type" . 33
7.5.1 Description . 33
ISO/IEC 2020
7.5.2 Characteristics . 34
8 Block "Hierarchy" . 34
8.1 Composition . 34
8.2 Qualifier . 35
8.3 Sub-block "Equipment hierarchy" . 35
8.3.1 Description . 35
8.3.2 Characteristics . 35
8.4 Sub-block "Functional hierarchy" . 37
8.4.1 Description . 37
8.4.2 Characteristics . 37
9 Block "Life cycle" . 38
9.1 Composition . 38
9.2 Qualifier . 39
9.3 Sub-block "Product type life cycle" . 39
9.3.1 Description . 39
9.3.2 Characteristics . 40
9.4 Sub-block "Product instance life cycle" . 41
9.4.1 Description . 41
9.4.2 Characteristics . 41
9.5 Sub-block "Production system life cycle" . 41
9.5.1 Description . 41
9.5.2 Characteristics . 42
10 Block "Interoperability" . 42
10.1 General . 42
10.2 Composition . 43
10.3 Qualifier . 43
10.4 Sub-block "Interoperability approach" . 43
10.4.1 Description . 43
10.4.2 Characteristics . 43
10.5 Sub-block "Interoperability concern" . 45
10.5.1 Description . 45
10.5.2 Characteristics . 45
10.6 Sub-block "Interoperability layer" . 46
10.6.1 Description . 46
10.6.2 Characteristics . 46
11 Block "System engineering process" . 46
11.1 General . 46
11.2 Composition . 47
11.3 Qualifier . 48
11.4 Sub-block "Agreement processes" . 48
11.4.1 Description . 48
11.4.2 Characteristics . 48
11.5 Sub-block "Organizational project-enabling processes" . 49
11.5.1 Description . 49
11.5.2 Characteristics . 49
11.6 Sub-block "Technical management processes" . 49
11.6.1 Description . 49
11.6.2 Characteristics . 49
– 4 – ISO/IEC TR 63306-1:2020
ISO/IEC 2020
11.7 Sub-block "Technical processes" .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.