IEC PAS 61784-3-18:2009

Industrial communication networks - Profiles - Part 3-18: Functional safety fieldbuses - Additional specifications for CPF SNpFAMILY

IEC/PAS 61784-3-18:2009(E) specifies a safety communication layer (services and protocol) based on CPF SNpFAMILY of IEC/PAS 62633 and IEC/PAS 61158 Type SNpTYPE. It identifies the principles for functional safety communications defined in IEC 61784-3 that are relevant for this safety communication layer. It contains an additional profile - SNpTYPE - which may be integrated into a future new edition of IEC 61784-3.

General Information

• Status: Replaced
• Publication Date: 10-Aug-2009
• ICS: 13.110 - Safety of machinery
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.100.05 - Multilayer applications
• Technical Committee: SC 65C - Industrial networks
• Current Stage: DELPUB - Deleted Publication
• Completion Date: 20-Apr-2011

Relations

• Replaced By: IEC 61784-3-18:2011 - Industrial communication networks - Profiles - Part 3-18: Functional safety fieldbuses - Additional specifications for CPF 18
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC/PAS 61784-3-18 ®
Edition 1.0 2009-08
PUBLICLY AVAILABLE
SPECIFICATION
PRE-STANDARD
colour
inside
Industrial communication networks – Profiles –
Part 3-18: Functional safety fieldbuses – Additional specifications for CPF
SNpFAMILY
IEC/PAS 61784-3-18:2009(E)
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: [e-mail]
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: [e-mail]
Tel.: [phone]
Fax: [phone]
IEC/PAS 61784-3-18 ®
Edition 1.0 2009-08
PUBLICLY AVAILABLE
SPECIFICATION
PRE-STANDARD
colour
inside
Industrial communication networks – Profiles –
Part 3-18: Functional safety fieldbuses – Additional specifications for CPF
SNpFAMILY
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
XA
ICS 13.110; 25.040.40; 35.100.05 ISBN 978-2-88910-807-7
– 2 – PAS 61784-3-18 © IEC:2009(E)
CONTENTS
FOREWORD.5
INTRODUCTION.7
1 Scope.8
2 Normative references .8
3 Terms, definitions, symbols, abbreviated terms and conventions .9
3.1 Terms and definitions .9
3.1.1 Common terms and definitions .9
3.1.2 CPF X: Additional terms and definitions.13
3.2 Symbols and abbreviated terms.14
3.2.1 Common symbols and abbreviated terms .14
3.2.2 CPF SNpFAMILY: Additional abbreviated terms .15
3.2.3 CPF SNpFAMILY: Additional symbols.16
3.3 Conventions .16
4 Overview of FSCP SNpFAMILY/1 (SafetyNET p™).17
5 General .18
5.1 External documents providing specifications for the profile.18
5.2 Safety functional requirements .19
5.3 Safety measures .19
5.4 Safety communication layer structure .20
5.5 Relationships with FAL (and DLL, PhL) .20
5.5.1 General .20
5.5.2 Data Types .20
6 Safety communication layer services .21
6.1 General elements .21
6.1.1 General .21
6.1.2 Safe object dictionary .21
6.1.3 Safe process data object (SPDO) .21
6.1.4 Safe heartbeat (SHB) .21
6.1.5 Safe delay monitoring (SDM) .21
6.2 Communication relation.21
7 Safety communication layer protocol .23
7.1 Safety PDU formats.23
7.1.1 Safe process data objects (SPDO) .23
7.1.2 Safe heartbeat (SHB) .24
7.1.3 Safety PDUs embedded in a Type SNpTYPE PDU.26
7.2 Safe application layer management (SALMT) .27
7.3 Safe process data communication .28
7.4 Safe heartbeat.29
7.5 Delay monitoring .30
8 Safety communication layer management.31
8.1 Parameter handling .31
8.2 Object dictionary .31
8.2.1 General .31
8.2.2 Communication profile section.32
8.2.3 Standardized device profile section .47
8.3 Device description.47

PAS 61784-3-18 © IEC:2009(E) – 3 –
9 System requirements.47
9.1 Indicators and switches .47
9.1.1 Indicator states and flash rates.47
9.1.2 Indicators .48
9.1.3 Switches.48
9.2 Installation guidelines.48
9.3 Safety function response time .48
9.3.1 General .48
9.3.2 Determination of FSCP SNpFAMILY time expectation behavior .50
9.3.3 Calculation of the worst case safety function response time .50
9.4 Duration of demands .51
9.5 Constraints for calculation of system characteristics.51
9.5.1 Safety related constraints .51
9.5.2 Probabilistic considerations .52
9.6 Maintenance.52
9.7 Safety manual .53
10 Certification.53
Bibliography.54

Figure 1 – FSCP SNpFAMILY/1 system .18
Figure 2 – FSCP SNpFAMILY/1 software architecture.20
Figure 3 – SPDO interaction model.22
Figure 4 – SHB interaction model .22
Figure 5 – Safe process data object frame.23
Figure 6 – Safe heartbeat request PDU .24
Figure 7 – Safe heartbeat response PDU.25
Figure 8 – Safety PDU for FSCP SNpFAMILY embedded in a Type SNpTYPE CDC
data section .27
Figure 9 – Safe application layer management state machine .28
Figure 10 – RxSPDO state machine.29
Figure 11 – Heartbeat procedure .30
Figure 12 – Delay measurement principle .30
Figure 13 – Parameter handling.31
Figure 14 – Safety response time components.49
Figure 15 – Considered data fields for message size calculation.52
Figure 16 – Residual error rate .52

Table 1 – Object definition .17
Table 2 – Safety PDU element definition.17
Table 3 – Communication errors and detection measures .19
Table 4 – SPDO PDU structure.23
Table 5 – SHB request PDU structure.25
Table 6 – SHB response PDU structure .25
Table 7 – Safe heartbeat FS AL state encoding .26
Table 8 – Safe application layer management commands .27

– 4 – PAS 61784-3-18 © IEC:2009(E)
Table 9 – State transitions SALMT state machine .28
Table 10 – State transitions RxSPDO state machine.29
Table 11 – Object dictionary structure.32
Table 12 – Objects of communication section .33
Table 13 – Device type .34
Table 14 – Safe ID.34
Table 15 – Fail-safe consumer heartbeat list entry encoding.35
Table 16 – Fail-safe consumer heartbeat .36
Table 17 – Fail-safe producer heartbeat parameter.36
Table 18 – Fail-safe bus cycle times .39
Table 19 – SPDO timeout tolerance .
...