IEC 60092-350:2001

Electrical installations in ships - Part 350: Shipboard power cables - General construction and test requirements

This part of IEC 60092 specifies the general constructional requirements and general test recommendations for shipboard cables with copper conductors intended for power systems at voltages up to and including 8,7/15 kV.

General Information

• Status: Published
• Publication Date: 10-Jun-2001
• ICS: 29.035.01 - Insulating materials in general
• ICS: 29.060.20 - Cables
• ICS: 47.020.60 - Electrical equipment of ships and of marine structures
• Technical Committee: SC 18A - Electric cables for ships and mobile and fixed offshore units
• Current Stage: DELPUB - Deleted Publication
• Completion Date: 07-Feb-2008

Relations

• Revises: IEC 60092-350:1988/AMD2:1999 - Amendment 2 - Electrical installations in ships. Part 350: Low-voltage shipboard power cables - General construction and test requirements
• Effective Date: 05-Sep-2023
• Revised: IEC 60092-350:2008 - Electrical installations in ships - Part 350: General construction and test methods of power, control and instrumentation cables for shipboard and offshore applications
• Effective Date: 05-Sep-2023

Standards Content (Sample)

INTERNATIONAL IEC
STANDARD
60092-350
Second edition
2001-06
Electrical installations in ships –
Part 350:
Shipboard power cables –
General construction and test requirements
Installations électriques à bord des navires –
Partie 350:
Câbles d'énergie pour utilisation à bord des navires –
Construction générale et prescriptions d'essai

Reference number
Publication numbering
As from 1 January 1997 all IEC publications are issued with a designation in the
60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1.

Consolidated editions
The IEC is now publishing consolidated versions of its publications. For example,

edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the
base publication incorporating amendment 1 and the base publication incorporating
amendments 1 and 2.
Further information on IEC publications
The technical content of IEC publications is kept under constant review by the IEC,
thus ensuring that the content reflects current technology. Information relating to
this publication, including its validity, is available in the IEC Catalogue of
publications (see below) in addition to new editions, amendments and corrigenda.
Information on the subjects under consideration and work in progress undertaken
by the technical committee which has prepared this publication, as well as the list
of publications issued, is also available from the following:
• IEC Web Site (www.iec.ch)
• Catalogue of IEC publications
The on-line catalogue on the IEC web site (www.iec.ch/catlg-e.htm) enables
you to search by a variety of criteria including text searches, technical
committees and date of publication. On-line information is also available on
recently issued publications, withdrawn and replaced publications, as well as
corrigenda.
• IEC Just Published
This summary of recently issued publications (www.iec.ch/JP.htm) is also
available by email. Please contact the Customer Service Centre (see below) for
further information.
• Customer Service Centre
If you have any questions regarding this publication or need further assistance,
please contact the Customer Service Centre:
Email: [e-mail]
Tel: [phone]
Fax: [phone]
INTERNATIONAL IEC
STANDARD
60092-350
Second edition
2001-06
Electrical installations in ships –
Part 350:
Shipboard power cables –
General construction and test requirements
Installations électriques à bord des navires –
Partie 350:
Câbles d'énergie pour utilisation à bord des navires –
Construction générale et prescriptions d'essai

 IEC 2001  Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: [phone] e-mail: [e-mail] IEC web site http://www.iec.ch
Commission Electrotechnique Internationale
PRICE CODE
X
International Electrotechnical Commission
For price, see current catalogue

– 2 – 60092-350  IEC:2001(E)
CONTENTS
FOREWORD . 5

1 Scope . 7

2 Normative references . 7

3 Definitions. 8

3.1 Definitions concerning cables . 8

3.2 Definitions of dimensional values. 10
3.3 Definitions concerning the tests. 10
4 Conductors . 10
4.1 Material. 10
4.2 Metal coating and separator . 11
4.3 Class and form. 11
5 Insulation . 11
5.1 Material. 11
5.2 Application of the insulation. 12
5.3 Insulation thickness. 12
6 Cabling . 12
7 Inner covering, fillers and binders . 12
7.1 Material. 12
7.2 Inner covering thickness. 12
8 Protective covering. 13
8.1 Constituent elements of protective coverings . 13
8.2 Metal braid armour . 13
8.3 Metal wire armour . 13
8.4 Metal tape armour . 14
8.5 Dimensions of the metal armours . 14
8.6 Non-metallic sheath . 14
8.7 Impregnated textile braid. 14
8.8 Bedding of armour. 15
8.9 Removal of the protective coverings . 15
9 Test conditions. 15

9.1 Ambient temperature. 15
9.2 Frequency and waveform of power frequency test voltages. 15
10 Routine tests. 15
10.1 General. 15
10.2 Electrical resistance of conductors . 16
10.3 High-voltage test . 16
10.4 Measurement of insulation resistance. 17

60092-350 © IEC:2001(E) – 3 –
11 Special tests . 18

11.1 General. 18

11.2 Frequency of special tests. 18

11.3 Conductor examination. 18

11.4 Measurement of thickness of insulation . 19

11.5 Measurements of thickness of non-metallic sheaths (excluding inner

coverings) . 19

11.6 Dimensions of armourings. 20

11.7 Measurement of external diameter . 20

11.8 Hot-set test for insulation and for sheaths . 20

11.9 Test for the behaviour at low temperature of PVC insulation and PVC, SHF 1
and SHF 2 sheaths. 20
11.10 Watertightness test . 20
11.11 Test of the metal coating of copper wires. 21
11.12 Galvanizing test. 21
12 Type tests, electrical . 21
12.1 General. 21
12.2 Insulation resistance measurement . 21
12.3 Increase in a.c. capacitance after immersion in water . 22
12.4 High-voltage test for 4 h . 23
13 Type tests, non-electrical . 23
13.1 Measurement of thickness of insulation . 23
13.2 Measurement of thickness of non-metallic sheaths (excluding inner coverings). 24
13.3 Tests for determining the mechanical properties of insulation before and after
ageing. 24
13.4 Tests for determining the mechanical properties of sheaths before and after
ageing. 24
13.5 Additional ageing test on pieces of completed cables (compatibility test). 25
13.6 Loss of mass test on PVC insulation and sheaths . 25
13.7 Test for the behaviour at high temperature of PVC insulation and PVC and
SHF 1 sheaths (pressure test). 26
13.8 Test for the behaviour at low temperature of PVC insulation and PVC, SHF 1
and SHF 2 sheaths. 26
13.9 Test for resistance to cracking of PVC insulation and PVC and SHF 1 sheaths
(heat shock test) . 26
13.10 Ozone resistance test for insulation and for sheaths . 26

13.11 Hot-set test for insulations and for sheaths . 26
13.12 Oil immersion test for elastomeric sheaths. 27
13.13 Flame retardance test. 27
13.14 Test for fire-proof or fire-resisting cables . 27
13.15 Determination of hardness for HEPR and HF HEPR insulations. 27
13.16 Determination of elastic modulus for HEPR and HF HEPR insulation. 27
13.17 Determination of degree of acidity of gases evolved during the combustion
of insulating materials by measuring pH and conductivity . 27
13.18 Determination of the amount of halogen acid gas for sheathing materials. 27

– 4 – 60092-350  IEC:2001(E)
Annex A (normative) The fictitious calculation method for determination of dimensions

of protective coverings. 30

Annex B (normative) Rounding of numbers . 35

Annex C (Informative) Calculation of the lower and upper limits for the average outer

dimensions of cables with circular copper conductors . 36

Annex D (normative) Procedure for checking the efficacy of the spark testing method . 40

Annex E (normative) Test of the metal coating of copper wires. 42

Annex F (normative) Galvanizing test for steel wires . 43

Bibliography . 44

60092-350 © IEC:2001(E) – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION

____________
ELECTRICAL INSTALLATIONS IN SHIPS –

Part 350: Shipboard power cables –

General construction and test requirements

FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, gover
...