ISO 22839:2013

Intelligent transport systems — Forward vehicle collision mitigation systems — Operation, performance, and verification requirements

ISO 22839:2013 specifies the concept of operation, minimum functionality, system requirements, system interfaces, and test methods for Forward Vehicle Collision Mitigation Systems (FVCMS). It specifies the behaviors that are required for FVCMS, and the system test criteria necessary to verify that a given implementation meets the requirements of ISO 22839:2013. Implementation choices are left to system designers, wherever possible.

Systèmes intelligents de transport — Systèmes d'atténuation de collision de véhicule frontale — Exigences de fonctionnement, de performance et de vérification

General Information

• Status: Published
• Publication Date: 23-May-2013
• ICS: 35.240.60 - IT applications in transport
• ICS: 43.040.99 - Other road vehicle systems
• Technical Committee: ISO/TC 204 - Intelligent transport systems
• Drafting Committee: ISO/TC 204/WG 14 - Vehicle/roadway warning and control systems
• Current Stage: 9060 - Close of review
• Start Date: 04-Mar-2029

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 22839
First edition
2013-06-01


Intelligent transport systems — Forward
vehicle collision mitigation systems —
Operation, performance, and verification
requirements
Systèmes intelligents de transport — Systèmes d'atténuation de
collision de véhicule frontale — Exigences de fonctionnement, de
performance et de vérification




Reference number
ISO 22839:2013(E)
©
ISO 2013

---------------------- Page: 1 ----------------------
ISO 22839:2013(E)

COPYRIGHT PROTECTED DOCUMENT


©  ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any
means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission.
Permission can be requested from either ISO at the address below or ISO’s member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO 2013 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 22839:2013(E)
Contents Page
Foreword . v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols (and abbreviated terms) . 6
5 Classifications . 7
5.1 System classification by curve radius capability . 7
5.2 Classification by countermeasure types included . 7
5.2.1 Collision Warning (CW) countermeasure . 7
5.2.2 Speed Reduction Braking (SRB) countermeasure . 7
5.2.3 Mitigation Braking (MB) Countermeasure . 8
5.2.4 Combining countermeasures . 8
6 Requirements . 8
6.1 Minimum enabling capabilities . 8
6.1.1 Light vehicle necessary functions . 8
6.1.2 Heavy vehicle necessary functions . 9
6.2 Operating model — State Transition Diagram . 9
6.2.1 State functional descriptions . 10
6.3 Performance requirements . 11
6.3.1 Target vehicle types . 11
6.3.2 Collision types . 11
6.3.3 Operating speed . 11
6.3.4 Target vehicle detection area . 13
6.3.5 Target discrimination . 14
6.3.6 Countermeasure re
...