ISO/IEC TS 24192-1:2021
(Main)Cards and security devices for personal identification — Communication between contactless readers and fare media used in public transport — Part 1: Implementation requirements for ISO/IEC 14443 (all parts)
Cards and security devices for personal identification — Communication between contactless readers and fare media used in public transport — Part 1: Implementation requirements for ISO/IEC 14443 (all parts)
This document defines the technical requirements to be met by contactless public transport (PT) devices in order to be able to interface together using the ISO/IEC 14443 (all parts) contactless communications protocol. This document applies to PT devices: — PT readers which are contactless fare management system terminals acting as a PCD contactless reader based on ISO/IEC 14443 (all parts); — PT objects which are contactless fare media acting as a PICC contactless object based on ISO/IEC 14443 (all parts). This document addresses interoperability of consumer-market NFC mobile devices, compliant to NFC Forum specifications, with above mentioned PT devices, aligns with ISO/IEC 14443 (all parts) and does not seek to limit compliance for PT readers with EMV Contactless Interface Specification.
Cartes et dispositifs de sécurité pour l'identification personnelle — Communication entre terminaux et objets sans contact utilisés en transport public — Partie 1: Exigences d'implémentation pour l'ISO/IEC 14443 (toutes les parties)
General Information
Buy Standard
Standards Content (Sample)
TECHNICAL ISO/IEC TS
SPECIFICATION 24192-1
First edition
2021-05
Cards and security devices
for personal identification —
Communication between contactless
readers and fare media used in public
transport —
Part 1:
Implementation requirements for
ISO/IEC 14443 (all parts)
Cartes et dispositifs de sécurité pour l'identification personnelle —
Communication entre terminaux et objets sans contact utilisés en
transport public —
Partie 1: Exigences d'implémentation pour l'ISO/IEC 14443 (toutes les
parties)
Reference number
©
ISO/IEC 2021
© ISO/IEC 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO/IEC 2021 – All rights reserved
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols and abbreviations . 2
5 Conformance . 3
6 Dual conformance of PT devices to ISO/IEC TS 24192 (all parts) and EMV
Contactless Interface Specification . 3
7 Interoperability of PT devices and NFC mobile devices . 3
7.1 Description of the “concept for interoperability” . 3
7.2 References for implementation and test of NFC mobile devices . 4
7.3 Limitations . 4
8 Requirements and recommendations applicable to PT readers . 5
8.1 General . 5
8.1.1 Overview . 5
8.1.2 IFM reader . 5
8.1.3 Common reader . 6
8.2 General requirements . 7
8.3 Requirements on polling and recognizing contactless objects . 8
8.4 Performance recommendations . 8
9 Requirements and recommendations applicable to PT objects . 9
9.1 General . 9
9.2 Requirements . 9
9.3 Performance recommendations . 9
10 Implementation characteristics . 9
10.1 General . 9
10.2 ICS for PT readers – PCD . .10
10.2.1 General.10
10.2.2 PCD general technical characteristics.10
10.2.3 PCD supported options .11
10.2.4 PCD test parameters .12
10.3 ICS for PT objects - PICC .12
10.3.1 General.12
10.3.2 PICC general technical characteristics .13
10.3.3 PICC supported options .13
10.3.4 PICC test parameters .14
11 Test conditions for PT reader and PT objects .15
11.1 General .15
11.2 Temperature .15
11.3 Test conditions for PT readers .15
11.3.1 General.15
11.3.2 Initial positions template .16
11.3.3 Test positions .16
11.3.4 Test mode .24
11.4 Test conditions for PT objects .24
11.4.1 Test positions .24
11.4.2 Test application .26
Annex A (informative) Examples of polling sequences and scenarios .27
© ISO/IEC 2021 – All rights reserved iii
Annex B (informative) Loopback interface for PT reader testing .29
Bibliography .30
iv © ISO/IEC 2021 – All rights reserved
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives or www .iec .ch/ members
_experts/ refdocs).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/
or on the ISO list of patent declarations received (see www .iso .org/ patents) or the IEC list of patent
declarations received (see http:// patents .iec .ch).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www .iso .org/
iso/ foreword .html. In the IEC, see www .iec .ch/ understanding -standards.
This document was prepared by Technical Committee ISO/IEC JTC 1, Information technology, Information
technology, Subcommittee SC 17, Cards and security devices for personal identification.
A list of all parts in the ISO/IEC TS 24192 series can be found on the ISO and IEC website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html and www .iec .ch/ national
-committees.
© ISO/IEC 2021 – All rights reserved v
Introduction
This document defines the requirements related to the use of ISO/IEC 14443 (all parts) to ensure
interoperability between fare management system terminals and multiple-form-factor contactless fare
media (smartcards, e-tickets, mobile phones, USB keys, tablets, etc.).
These implementation requirements are not designed to repeat or duplicate the referenced
specifications, essentially ISO/IEC 14443 (all parts) and ISO/IEC 10373-6, but to complement those
specifications with public transport specific considerations.
vi © ISO/IEC 2021 – All rights reserved
TECHNICAL SPECIFICATION ISO/IEC TS 24192-1:2021(E)
Cards and security devices for personal identification —
Communication between contactless readers and fare
media used in public transport —
Part 1:
Implementation requirements for ISO/IEC 14443 (all
parts)
1 Scope
This document defines the technical requirements to be met by contactless public transport (PT)
devices in order to be able to interface together using the ISO/IEC 14443 (all parts) contactless
communications protocol.
This document applies to PT devices:
— PT readers which are contactless fare management system terminals acting as a PCD contactless
reader based on ISO/IEC 14443 (
...
TECHNICAL ISO/IEC TS
SPECIFICATION 24192-1
First edition
2021-05
Cards and security devices
for personal identification —
Communication between contactless
readers and fare media used in public
transport —
Part 1:
Implementation requirements for
ISO/IEC 14443 (all parts)
Cartes et dispositifs de sécurité pour l'identification personnelle —
Communication entre terminaux et objets sans contact utilisés en
transport public —
Partie 1: Exigences d'implémentation pour l'ISO/IEC 14443 (toutes les
parties)
Reference number
©
ISO/IEC 2021
© ISO/IEC 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO/IEC 2021 – All rights reserved
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols and abbreviations . 2
5 Conformance . 3
6 Dual conformance of PT devices to ISO/IEC TS 24192 (all parts) and EMV
Contactless Interface Specification . 3
7 Interoperability of PT devices and NFC mobile devices . 3
7.1 Description of the “concept for interoperability” . 3
7.2 References for implementation and test of NFC mobile devices . 4
7.3 Limitations . 4
8 Requirements and recommendations applicable to PT readers . 5
8.1 General . 5
8.1.1 Overview . 5
8.1.2 IFM reader . 5
8.1.3 Common reader . 6
8.2 General requirements . 7
8.3 Requirements on polling and recognizing contactless objects . 8
8.4 Performance recommendations . 8
9 Requirements and recommendations applicable to PT objects . 9
9.1 General . 9
9.2 Requirements . 9
9.3 Performance recommendations . 9
10 Implementation characteristics . 9
10.1 General . 9
10.2 ICS for PT readers – PCD . .10
10.2.1 General.10
10.2.2 PCD general technical characteristics.10
10.2.3 PCD supported options .11
10.2.4 PCD test parameters .12
10.3 ICS for PT objects - PICC .12
10.3.1 General.12
10.3.2 PICC general technical characteristics .13
10.3.3 PICC supported options .13
10.3.4 PICC test parameters .14
11 Test conditions for PT reader and PT objects .15
11.1 General .15
11.2 Temperature .15
11.3 Test conditions for PT readers .15
11.3.1 General.15
11.3.2 Initial positions template .16
11.3.3 Test positions .16
11.3.4 Test mode .24
11.4 Test conditions for PT objects .24
11.4.1 Test positions .24
11.4.2 Test application .26
Annex A (informative) Examples of polling sequences and scenarios .27
© ISO/IEC 2021 – All rights reserved iii
Annex B (informative) Loopback interface for PT reader testing .29
Bibliography .30
iv © ISO/IEC 2021 – All rights reserved
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives or www .iec .ch/ members
_experts/ refdocs).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/
or on the ISO list of patent declarations received (see www .iso .org/ patents) or the IEC list of patent
declarations received (see http:// patents .iec .ch).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www .iso .org/
iso/ foreword .html. In the IEC, see www .iec .ch/ understanding -standards.
This document was prepared by Technical Committee ISO/IEC JTC 1, Information technology, Information
technology, Subcommittee SC 17, Cards and security devices for personal identification.
A list of all parts in the ISO/IEC TS 24192 series can be found on the ISO and IEC website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html and www .iec .ch/ national
-committees.
© ISO/IEC 2021 – All rights reserved v
Introduction
This document defines the requirements related to the use of ISO/IEC 14443 (all parts) to ensure
interoperability between fare management system terminals and multiple-form-factor contactless fare
media (smartcards, e-tickets, mobile phones, USB keys, tablets, etc.).
These implementation requirements are not designed to repeat or duplicate the referenced
specifications, essentially ISO/IEC 14443 (all parts) and ISO/IEC 10373-6, but to complement those
specifications with public transport specific considerations.
vi © ISO/IEC 2021 – All rights reserved
TECHNICAL SPECIFICATION ISO/IEC TS 24192-1:2021(E)
Cards and security devices for personal identification —
Communication between contactless readers and fare
media used in public transport —
Part 1:
Implementation requirements for ISO/IEC 14443 (all
parts)
1 Scope
This document defines the technical requirements to be met by contactless public transport (PT)
devices in order to be able to interface together using the ISO/IEC 14443 (all parts) contactless
communications protocol.
This document applies to PT devices:
— PT readers which are contactless fare management system terminals acting as a PCD contactless
reader based on ISO/IEC 14443 (
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.